diff options
Diffstat (limited to 'arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts')
| -rw-r--r-- | arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts | 99 |
1 files changed, 87 insertions, 12 deletions
diff --git a/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts b/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts index b47fe02c33fb..62d18ca769a1 100644 --- a/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts +++ b/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts @@ -5,6 +5,8 @@ */ /dts-v1/; + +#include <dt-bindings/leds/common.h> #include "rk3308.dtsi" / { @@ -15,6 +17,7 @@ ethernet0 = &gmac; mmc0 = &emmc; mmc1 = &sdmmc; + mmc2 = &sdio; }; chosen { @@ -24,17 +27,21 @@ leds { compatible = "gpio-leds"; pinctrl-names = "default"; - pinctrl-0 = <&green_led_gio>, <&heartbeat_led_gpio>; + pinctrl-0 = <&green_led>, <&heartbeat_led>; green-led { + color = <LED_COLOR_ID_GREEN>; default-state = "on"; + function = LED_FUNCTION_POWER; gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; label = "rockpis:green:power"; linux,default-trigger = "default-on"; }; blue-led { + color = <LED_COLOR_ID_BLUE>; default-state = "on"; + function = LED_FUNCTION_HEARTBEAT; gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; label = "rockpis:blue:user"; linux,default-trigger = "heartbeat"; @@ -126,21 +133,37 @@ }; &emmc { - bus-width = <4>; cap-mmc-highspeed; - mmc-hs200-1_8v; + cap-sd-highspeed; + no-sdio; non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>; vmmc-supply = <&vcc_io>; status = "okay"; }; &gmac { clock_in_out = "output"; + phy-handle = <&rtl8201f>; phy-supply = <&vcc_io>; - snps,reset-gpio = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - snps,reset-delays-us = <0 50000 50000>; status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + rtl8201f: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&mac_rst>; + reset-assert-us = <20000>; + reset-deassert-us = <50000>; + reset-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; + }; + }; }; &gpio0 { @@ -209,16 +232,46 @@ status = "okay"; }; +&io_domains { + vccio0-supply = <&vcc_io>; + vccio1-supply = <&vcc_io>; + vccio2-supply = <&vcc_io>; + vccio3-supply = <&vcc_io>; + vccio4-supply = <&vcc_1v8>; + vccio5-supply = <&vcc_io>; + status = "okay"; +}; + &pinctrl { pinctrl-names = "default"; pinctrl-0 = <&rtc_32k>; + bluetooth { + bt_reg_on: bt-reg-on { + rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_wake_host: bt-wake-host { + rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + host_wake_bt: host-wake-bt { + rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + gmac { + mac_rst: mac-rst { + rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + leds { - green_led_gio: green-led-gpio { + green_led: green-led { rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; }; - heartbeat_led_gpio: heartbeat-led-gpio { + heartbeat_led: heartbeat-led { rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; @@ -256,15 +309,31 @@ cap-sd-highspeed; cap-sdio-irq; keep-power-in-suspend; - max-frequency = <1000000>; + max-frequency = <100000000>; mmc-pwrseq = <&sdio_pwrseq>; + no-mmc; + no-sd; non-removable; - sd-uhs-sdr104; + sd-uhs-sdr50; + vmmc-supply = <&vcc_io>; + vqmmc-supply = <&vcc_1v8>; status = "okay"; + + rtl8723ds: wifi@1 { + reg = <1>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA0 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_host_wake>; + }; }; &sdmmc { + cap-mmc-highspeed; cap-sd-highspeed; + disable-wp; + vmmc-supply = <&vcc_io>; status = "okay"; }; @@ -283,16 +352,22 @@ }; &uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer>; status = "okay"; }; &uart4 { + uart-has-rtscts; status = "okay"; bluetooth { - compatible = "realtek,rtl8723bs-bt"; - device-wake-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>; + compatible = "realtek,rtl8723ds-bt"; + device-wake-gpios = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>; host-wake-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_reg_on &bt_wake_host &host_wake_bt>; }; }; |