diff options
Diffstat (limited to 'arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts')
-rw-r--r-- | arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts | 58 |
1 files changed, 57 insertions, 1 deletions
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts index b8e15b76a8a6..966bbc582d89 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts @@ -52,7 +52,7 @@ fan: pwm-fan { compatible = "pwm-fan"; - cooling-levels = <0 95 145 195 255>; + cooling-levels = <0 120 150 180 210 240 255>; fan-supply = <&vcc5v0_sys>; pwms = <&pwm1 0 50000 0>; #cooling-cells = <2>; @@ -65,6 +65,13 @@ shutdown-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>; }; + rfkill-bt { + compatible = "rfkill-gpio"; + label = "rfkill-m2-bt"; + radio-type = "bluetooth"; + shutdown-gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>; + }; + vcc3v3_pcie2x1l0: vcc3v3-pcie2x1l0-regulator { compatible = "regulator-fixed"; enable-active-high; @@ -279,6 +286,36 @@ }; }; +&package_thermal { + polling-delay = <1000>; + + trips { + package_fan0: package-fan0 { + temperature = <55000>; + hysteresis = <2000>; + type = "active"; + }; + + package_fan1: package-fan1 { + temperature = <65000>; + hysteresis = <2000>; + type = "active"; + }; + }; + + cooling-maps { + map1 { + trip = <&package_fan0>; + cooling-device = <&fan THERMAL_NO_LIMIT 1>; + }; + + map2 { + trip = <&package_fan1>; + cooling-device = <&fan 2 THERMAL_NO_LIMIT>; + }; + }; +}; + &pcie2x1l0 { pinctrl-names = "default"; pinctrl-0 = <&pcie2_0_rst>; @@ -383,6 +420,7 @@ bus-width = <4>; cap-mmc-highspeed; cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; disable-wp; sd-uhs-sdr104; vmmc-supply = <&vcc_3v3_s3>; @@ -411,6 +449,20 @@ status = "okay"; }; +&sfc { + pinctrl-names = "default"; + pinctrl-0 = <&fspim2_pins>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <104000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <1>; + }; +}; + &uart6 { pinctrl-names = "default"; pinctrl-0 = <&uart6m1_xfer &uart6m1_ctsn &uart6m1_rtsn>; @@ -742,6 +794,10 @@ }; }; +&tsadc { + status = "okay"; +}; + &uart2 { pinctrl-0 = <&uart2m0_xfer>; status = "okay"; |