diff options
Diffstat (limited to 'drivers/ide/ide-timings.c')
| -rw-r--r-- | drivers/ide/ide-timings.c | 198 |
1 files changed, 0 insertions, 198 deletions
diff --git a/drivers/ide/ide-timings.c b/drivers/ide/ide-timings.c deleted file mode 100644 index cfe78df74b7d..000000000000 --- a/drivers/ide/ide-timings.c +++ /dev/null @@ -1,198 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (c) 1999-2001 Vojtech Pavlik - * Copyright (c) 2007-2008 Bartlomiej Zolnierkiewicz - * - * Should you need to contact me, the author, you can do so either by - * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail: - * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic - */ - -#include <linux/kernel.h> -#include <linux/ide.h> -#include <linux/module.h> - -/* - * PIO 0-5, MWDMA 0-2 and UDMA 0-6 timings (in nanoseconds). - * These were taken from ATA/ATAPI-6 standard, rev 0a, except - * for PIO 5, which is a nonstandard extension and UDMA6, which - * is currently supported only by Maxtor drives. - */ - -static struct ide_timing ide_timing[] = { - - { XFER_UDMA_6, 0, 0, 0, 0, 0, 0, 0, 15 }, - { XFER_UDMA_5, 0, 0, 0, 0, 0, 0, 0, 20 }, - { XFER_UDMA_4, 0, 0, 0, 0, 0, 0, 0, 30 }, - { XFER_UDMA_3, 0, 0, 0, 0, 0, 0, 0, 45 }, - - { XFER_UDMA_2, 0, 0, 0, 0, 0, 0, 0, 60 }, - { XFER_UDMA_1, 0, 0, 0, 0, 0, 0, 0, 80 }, - { XFER_UDMA_0, 0, 0, 0, 0, 0, 0, 0, 120 }, - - { XFER_MW_DMA_4, 25, 0, 0, 0, 55, 20, 80, 0 }, - { XFER_MW_DMA_3, 25, 0, 0, 0, 65, 25, 100, 0 }, - { XFER_MW_DMA_2, 25, 0, 0, 0, 70, 25, 120, 0 }, - { XFER_MW_DMA_1, 45, 0, 0, 0, 80, 50, 150, 0 }, - { XFER_MW_DMA_0, 60, 0, 0, 0, 215, 215, 480, 0 }, - - { XFER_SW_DMA_2, 60, 0, 0, 0, 120, 120, 240, 0 }, - { XFER_SW_DMA_1, 90, 0, 0, 0, 240, 240, 480, 0 }, - { XFER_SW_DMA_0, 120, 0, 0, 0, 480, 480, 960, 0 }, - - { XFER_PIO_6, 10, 55, 20, 80, 55, 20, 80, 0 }, - { XFER_PIO_5, 15, 65, 25, 100, 65, 25, 100, 0 }, - { XFER_PIO_4, 25, 70, 25, 120, 70, 25, 120, 0 }, - { XFER_PIO_3, 30, 80, 70, 180, 80, 70, 180, 0 }, - - { XFER_PIO_2, 30, 290, 40, 330, 100, 90, 240, 0 }, - { XFER_PIO_1, 50, 290, 93, 383, 125, 100, 383, 0 }, - { XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0 }, - - { XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 960, 0 }, - - { 0xff } -}; - -struct ide_timing *ide_timing_find_mode(u8 speed) -{ - struct ide_timing *t; - - for (t = ide_timing; t->mode != speed; t++) - if (t->mode == 0xff) - return NULL; - return t; -} -EXPORT_SYMBOL_GPL(ide_timing_find_mode); - -u16 ide_pio_cycle_time(ide_drive_t *drive, u8 pio) -{ - u16 *id = drive->id; - struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio); - u16 cycle = 0; - - if (id[ATA_ID_FIELD_VALID] & 2) { - if (ata_id_has_iordy(drive->id)) - cycle = id[ATA_ID_EIDE_PIO_IORDY]; - else - cycle = id[ATA_ID_EIDE_PIO]; - - /* conservative "downgrade" for all pre-ATA2 drives */ - if (pio < 3 && cycle < t->cycle) - cycle = 0; /* use standard timing */ - - /* Use the standard timing for the CF specific modes too */ - if (pio > 4 && ata_id_is_cfa(id)) - cycle = 0; - } - - return cycle ? cycle : t->cycle; -} -EXPORT_SYMBOL_GPL(ide_pio_cycle_time); - -#define ENOUGH(v, unit) (((v) - 1) / (unit) + 1) -#define EZ(v, unit) ((v) ? ENOUGH((v) * 1000, unit) : 0) - -static void ide_timing_quantize(struct ide_timing *t, struct ide_timing *q, - int T, int UT) -{ - q->setup = EZ(t->setup, T); - q->act8b = EZ(t->act8b, T); - q->rec8b = EZ(t->rec8b, T); - q->cyc8b = EZ(t->cyc8b, T); - q->active = EZ(t->active, T); - q->recover = EZ(t->recover, T); - q->cycle = EZ(t->cycle, T); - q->udma = EZ(t->udma, UT); -} - -void ide_timing_merge(struct ide_timing *a, struct ide_timing *b, - struct ide_timing *m, unsigned int what) -{ - if (what & IDE_TIMING_SETUP) - m->setup = max(a->setup, b->setup); - if (what & IDE_TIMING_ACT8B) - m->act8b = max(a->act8b, b->act8b); - if (what & IDE_TIMING_REC8B) - m->rec8b = max(a->rec8b, b->rec8b); - if (what & IDE_TIMING_CYC8B) - m->cyc8b = max(a->cyc8b, b->cyc8b); - if (what & IDE_TIMING_ACTIVE) - m->active = max(a->active, b->active); - if (what & IDE_TIMING_RECOVER) - m->recover = max(a->recover, b->recover); - if (what & IDE_TIMING_CYCLE) - m->cycle = max(a->cycle, b->cycle); - if (what & IDE_TIMING_UDMA) - m->udma = max(a->udma, b->udma); -} -EXPORT_SYMBOL_GPL(ide_timing_merge); - -int ide_timing_compute(ide_drive_t *drive, u8 speed, - struct ide_timing *t, int T, int UT) -{ - u16 *id = drive->id; - struct ide_timing *s, p; - - /* - * Find the mode. - */ - s = ide_timing_find_mode(speed); - if (s == NULL) - return -EINVAL; - - /* - * Copy the timing from the table. - */ - *t = *s; - - /* - * If the drive is an EIDE drive, it can tell us it needs extended - * PIO/MWDMA cycle timing. - */ - if (id[ATA_ID_FIELD_VALID] & 2) { /* EIDE drive */ - memset(&p, 0, sizeof(p)); - - if (speed >= XFER_PIO_0 && speed < XFER_SW_DMA_0) { - if (speed <= XFER_PIO_2) - p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO]; - else if ((speed <= XFER_PIO_4) || - (speed == XFER_PIO_5 && !ata_id_is_cfa(id))) - p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO_IORDY]; - } else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2) - p.cycle = id[ATA_ID_EIDE_DMA_MIN]; - - ide_timing_merge(&p, t, t, IDE_TIMING_CYCLE | IDE_TIMING_CYC8B); - } - - /* - * Convert the timing to bus clock counts. - */ - ide_timing_quantize(t, t, T, UT); - - /* - * Even in DMA/UDMA modes we still use PIO access for IDENTIFY, - * S.M.A.R.T and some other commands. We have to ensure that the - * DMA cycle timing is slower/equal than the current PIO timing. - */ - if (speed >= XFER_SW_DMA_0) { - ide_timing_compute(drive, drive->pio_mode, &p, T, UT); - ide_timing_merge(&p, t, t, IDE_TIMING_ALL); - } - - /* - * Lengthen active & recovery time so that cycle time is correct. - */ - if (t->act8b + t->rec8b < t->cyc8b) { - t->act8b += (t->cyc8b - (t->act8b + t->rec8b)) / 2; - t->rec8b = t->cyc8b - t->act8b; - } - - if (t->active + t->recover < t->cycle) { - t->active += (t->cycle - (t->active + t->recover)) / 2; - t->recover = t->cycle - t->active; - } - - return 0; -} -EXPORT_SYMBOL_GPL(ide_timing_compute); |