diff options
Diffstat (limited to 'drivers/media/i2c/Kconfig')
| -rw-r--r-- | drivers/media/i2c/Kconfig | 622 |
1 files changed, 313 insertions, 309 deletions
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig index 5abc169f0a5c..14fe94f3c772 100644 --- a/drivers/media/i2c/Kconfig +++ b/drivers/media/i2c/Kconfig @@ -34,35 +34,53 @@ comment "audio, video and radio I2C drivers auto-selected by 'Autoselect ancilla menu "Audio decoders, processors and mixers" visible if !MEDIA_HIDE_ANCILLARY_SUBDRV -config VIDEO_TVAUDIO - tristate "Simple audio decoder chips" +config VIDEO_CS3308 + tristate "Cirrus Logic CS3308 audio ADC" depends on VIDEO_DEV && I2C help - Support for several audio decoder chips found on some bt8xx boards: - Philips: tda9840, tda9873h, tda9874h/a, tda9850, tda985x, tea6300, - tea6320, tea6420, tda8425, ta8874z. - Microchip: pic16c54 based design on ProVideo PV951 board. + Support for the Cirrus Logic CS3308 High Performance 8-Channel + Analog Volume Control To compile this driver as a module, choose M here: the - module will be called tvaudio. + module will be called cs3308. -config VIDEO_TDA7432 - tristate "Philips TDA7432 audio processor" +config VIDEO_CS5345 + tristate "Cirrus Logic CS5345 audio ADC" depends on VIDEO_DEV && I2C help - Support for tda7432 audio decoder chip found on some bt8xx boards. + Support for the Cirrus Logic CS5345 24-bit, 192 kHz + stereo A/D converter. To compile this driver as a module, choose M here: the - module will be called tda7432. + module will be called cs5345. -config VIDEO_TDA9840 - tristate "Philips TDA9840 audio processor" - depends on I2C +config VIDEO_CS53L32A + tristate "Cirrus Logic CS53L32A audio ADC" + depends on VIDEO_DEV && I2C help - Support for tda9840 audio decoder chip found on some Zoran boards. + Support for the Cirrus Logic CS53L32A low voltage + stereo A/D converter. To compile this driver as a module, choose M here: the - module will be called tda9840. + module will be called cs53l32a. + +config VIDEO_MSP3400 + tristate "Micronas MSP34xx audio decoders" + depends on VIDEO_DEV && I2C + help + Support for the Micronas MSP34xx series of audio decoders. + + To compile this driver as a module, choose M here: the + module will be called msp3400. + +config VIDEO_SONY_BTF_MPX + tristate "Sony BTF's internal MPX" + depends on VIDEO_DEV && I2C + help + Support for the internal MPX of the Sony BTF-PG472Z tuner. + + To compile this driver as a module, choose M here: the + module will be called sony-btf-mpx. config VIDEO_TDA1997X tristate "NXP TDA1997x HDMI receiver" @@ -79,6 +97,24 @@ config VIDEO_TDA1997X To compile this driver as a module, choose M here: the module will be called tda1997x. +config VIDEO_TDA7432 + tristate "Philips TDA7432 audio processor" + depends on VIDEO_DEV && I2C + help + Support for tda7432 audio decoder chip found on some bt8xx boards. + + To compile this driver as a module, choose M here: the + module will be called tda7432. + +config VIDEO_TDA9840 + tristate "Philips TDA9840 audio processor" + depends on I2C + help + Support for tda9840 audio decoder chip found on some Zoran boards. + + To compile this driver as a module, choose M here: the + module will be called tda9840. + config VIDEO_TEA6415C tristate "Philips TEA6415C audio processor" depends on I2C @@ -97,53 +133,26 @@ config VIDEO_TEA6420 To compile this driver as a module, choose M here: the module will be called tea6420. -config VIDEO_MSP3400 - tristate "Micronas MSP34xx audio decoders" - depends on VIDEO_DEV && I2C - help - Support for the Micronas MSP34xx series of audio decoders. - - To compile this driver as a module, choose M here: the - module will be called msp3400. - -config VIDEO_CS3308 - tristate "Cirrus Logic CS3308 audio ADC" - depends on VIDEO_DEV && I2C - help - Support for the Cirrus Logic CS3308 High Performance 8-Channel - Analog Volume Control - - To compile this driver as a module, choose M here: the - module will be called cs3308. - -config VIDEO_CS5345 - tristate "Cirrus Logic CS5345 audio ADC" - depends on VIDEO_DEV && I2C - help - Support for the Cirrus Logic CS5345 24-bit, 192 kHz - stereo A/D converter. - - To compile this driver as a module, choose M here: the - module will be called cs5345. - -config VIDEO_CS53L32A - tristate "Cirrus Logic CS53L32A audio ADC" +config VIDEO_TLV320AIC23B + tristate "Texas Instruments TLV320AIC23B audio codec" depends on VIDEO_DEV && I2C help - Support for the Cirrus Logic CS53L32A low voltage - stereo A/D converter. + Support for the Texas Instruments TLV320AIC23B audio codec. To compile this driver as a module, choose M here: the - module will be called cs53l32a. + module will be called tlv320aic23b. -config VIDEO_TLV320AIC23B - tristate "Texas Instruments TLV320AIC23B audio codec" +config VIDEO_TVAUDIO + tristate "Simple audio decoder chips" depends on VIDEO_DEV && I2C help - Support for the Texas Instruments TLV320AIC23B audio codec. + Support for several audio decoder chips found on some bt8xx boards: + Philips: tda9840, tda9873h, tda9874h/a, tda9850, tda985x, tea6300, + tea6320, tea6420, tda8425, ta8874z. + Microchip: pic16c54 based design on ProVideo PV951 board. To compile this driver as a module, choose M here: the - module will be called tlv320aic23b. + module will be called tvaudio. config VIDEO_UDA1342 tristate "Philips UDA1342 audio codec" @@ -154,15 +163,14 @@ config VIDEO_UDA1342 To compile this driver as a module, choose M here: the module will be called uda1342. -config VIDEO_WM8775 - tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer" +config VIDEO_VP27SMPX + tristate "Panasonic VP27's internal MPX" depends on VIDEO_DEV && I2C help - Support for the Wolfson Microelectronics WM8775 high - performance stereo A/D Converter with a 4 channel input mixer. + Support for the internal MPX of the Panasonic VP27s tuner. To compile this driver as a module, choose M here: the - module will be called wm8775. + module will be called vp27smpx. config VIDEO_WM8739 tristate "Wolfson Microelectronics WM8739 stereo audio ADC" @@ -174,23 +182,16 @@ config VIDEO_WM8739 To compile this driver as a module, choose M here: the module will be called wm8739. -config VIDEO_VP27SMPX - tristate "Panasonic VP27's internal MPX" +config VIDEO_WM8775 + tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer" depends on VIDEO_DEV && I2C help - Support for the internal MPX of the Panasonic VP27s tuner. + Support for the Wolfson Microelectronics WM8775 high + performance stereo A/D Converter with a 4 channel input mixer. To compile this driver as a module, choose M here: the - module will be called vp27smpx. - -config VIDEO_SONY_BTF_MPX - tristate "Sony BTF's internal MPX" - depends on VIDEO_DEV && I2C - help - Support for the internal MPX of the Sony BTF-PG472Z tuner. + module will be called wm8775. - To compile this driver as a module, choose M here: the - module will be called sony-btf-mpx. endmenu menu "RDS decoders" @@ -207,6 +208,7 @@ config VIDEO_SAA6588 To compile this driver as a module, choose M here: the module will be called saa6588. + endmenu menu "Video decoders" @@ -347,6 +349,20 @@ config VIDEO_KS0127 To compile this driver as a module, choose M here: the module will be called ks0127. +config VIDEO_MAX9286 + tristate "Maxim MAX9286 GMSL deserializer support" + depends on I2C && I2C_MUX + depends on VIDEO_DEV + depends on OF_GPIO + select V4L2_FWNODE + select VIDEO_V4L2_SUBDEV_API + select MEDIA_CONTROLLER + help + This driver supports the Maxim MAX9286 GMSL deserializer. + + To compile this driver as a module, choose M here: the + module will be called max9286. + config VIDEO_ML86V7667 tristate "OKI ML86V7667 video decoder" depends on VIDEO_DEV && I2C @@ -476,20 +492,6 @@ config VIDEO_VPX3220 To compile this driver as a module, choose M here: the module will be called vpx3220. -config VIDEO_MAX9286 - tristate "Maxim MAX9286 GMSL deserializer support" - depends on I2C && I2C_MUX - depends on VIDEO_DEV - depends on OF_GPIO - select V4L2_FWNODE - select VIDEO_V4L2_SUBDEV_API - select MEDIA_CONTROLLER - help - This driver supports the Maxim MAX9286 GMSL deserializer. - - To compile this driver as a module, choose M here: the - module will be called max9286. - comment "Video and audio decoders" config VIDEO_SAA717X @@ -508,23 +510,19 @@ endmenu menu "Video encoders" visible if !MEDIA_HIDE_ANCILLARY_SUBDRV -config VIDEO_SAA7127 - tristate "Philips SAA7127/9 digital video encoders" +config VIDEO_AD9389B + tristate "Analog Devices AD9389B encoder" depends on VIDEO_DEV && I2C - help - Support for the Philips SAA7127/9 digital video encoders. - - To compile this driver as a module, choose M here: the - module will be called saa7127. + select MEDIA_CONTROLLER + select VIDEO_V4L2_SUBDEV_API -config VIDEO_SAA7185 - tristate "Philips SAA7185 video encoder" - depends on VIDEO_DEV && I2C help - Support for the Philips SAA7185 video encoder. + Support for the Analog Devices AD9389B video encoder. + + This is a Analog Devices HDMI transmitter. To compile this driver as a module, choose M here: the - module will be called saa7185. + module will be called ad9389b. config VIDEO_ADV7170 tristate "Analog Devices ADV7170 video encoder" @@ -586,25 +584,29 @@ config VIDEO_ADV7511_CEC When selected the adv7511 will support the optional HDMI CEC feature. -config VIDEO_AD9389B - tristate "Analog Devices AD9389B encoder" - depends on VIDEO_DEV && I2C - select MEDIA_CONTROLLER - select VIDEO_V4L2_SUBDEV_API - +config VIDEO_AK881X + tristate "AK8813/AK8814 video encoders" + depends on I2C help - Support for the Analog Devices AD9389B video encoder. + Video output driver for AKM AK8813 and AK8814 TV encoders - This is a Analog Devices HDMI transmitter. +config VIDEO_SAA7127 + tristate "Philips SAA7127/9 digital video encoders" + depends on VIDEO_DEV && I2C + help + Support for the Philips SAA7127/9 digital video encoders. To compile this driver as a module, choose M here: the - module will be called ad9389b. + module will be called saa7127. -config VIDEO_AK881X - tristate "AK8813/AK8814 video encoders" - depends on I2C +config VIDEO_SAA7185 + tristate "Philips SAA7185 video encoder" + depends on VIDEO_DEV && I2C help - Video output driver for AKM AK8813 and AK8814 TV encoders + Support for the Philips SAA7185 video encoder. + + To compile this driver as a module, choose M here: the + module will be called saa7185. config VIDEO_THS8200 tristate "Texas Instruments THS8200 video encoder" @@ -615,6 +617,7 @@ config VIDEO_THS8200 To compile this driver as a module, choose M here: the module will be called ths8200. + endmenu menu "Video improvement chips" @@ -643,6 +646,7 @@ config VIDEO_UPD64083 To compile this driver as a module, choose M here: the module will be called upd64083. + endmenu menu "Audio/Video compression chips" @@ -676,31 +680,11 @@ config SDR_MAX2175 To compile this driver as a module, choose M here; the module will be called max2175. - endmenu menu "Miscellaneous helper chips" visible if !MEDIA_HIDE_ANCILLARY_SUBDRV -config VIDEO_THS7303 - tristate "THS7303/53 Video Amplifier" - depends on VIDEO_DEV && I2C - select V4L2_ASYNC - help - Support for TI THS7303/53 video amplifier - - To compile this driver as a module, choose M here: the - module will be called ths7303. - -config VIDEO_M52790 - tristate "Mitsubishi M52790 A/V switch" - depends on VIDEO_DEV && I2C - help - Support for the Mitsubishi M52790 A/V switch. - - To compile this driver as a module, choose M here: the - module will be called m52790. - config VIDEO_I2C tristate "I2C transport video support" depends on VIDEO_DEV && I2C @@ -715,6 +699,15 @@ config VIDEO_I2C To compile this driver as a module, choose M here: the module will be called video-i2c +config VIDEO_M52790 + tristate "Mitsubishi M52790 A/V switch" + depends on VIDEO_DEV && I2C + help + Support for the Mitsubishi M52790 A/V switch. + + To compile this driver as a module, choose M here: the + module will be called m52790. + config VIDEO_ST_MIPID02 tristate "STMicroelectronics MIPID02 CSI-2 to PARALLEL bridge" depends on I2C && VIDEO_DEV @@ -728,6 +721,17 @@ config VIDEO_ST_MIPID02 To compile this driver as a module, choose M here: the module will be called st-mipid02. + +config VIDEO_THS7303 + tristate "THS7303/53 Video Amplifier" + depends on VIDEO_DEV && I2C + select V4L2_ASYNC + help + Support for TI THS7303/53 video amplifier + + To compile this driver as a module, choose M here: the + module will be called ths7303. + endmenu # @@ -922,6 +926,103 @@ config VIDEO_IMX412 To compile this driver as a module, choose M here: the module will be called imx412. +config VIDEO_MAX9271_LIB + tristate + +config VIDEO_MT9M001 + tristate "mt9m001 support" + depends on I2C && VIDEO_DEV + select MEDIA_CONTROLLER + select VIDEO_V4L2_SUBDEV_API + help + This driver supports MT9M001 cameras from Micron, monochrome + and colour models. + +config VIDEO_MT9M032 + tristate "MT9M032 camera sensor support" + depends on I2C && VIDEO_DEV + select MEDIA_CONTROLLER + select VIDEO_V4L2_SUBDEV_API + select VIDEO_APTINA_PLL + help + This driver supports MT9M032 camera sensors from Aptina, monochrome + models only. + +config VIDEO_MT9M111 + tristate "mt9m111, mt9m112 and mt9m131 support" + depends on I2C && VIDEO_DEV + select V4L2_FWNODE + help + This driver supports MT9M111, MT9M112 and MT9M131 cameras from + Micron/Aptina + +config VIDEO_MT9P031 + tristate "Aptina MT9P031 support" + depends on I2C && VIDEO_DEV + select MEDIA_CONTROLLER + select VIDEO_V4L2_SUBDEV_API + select VIDEO_APTINA_PLL + select V4L2_FWNODE + help + This is a Video4Linux2 sensor driver for the Aptina + (Micron) mt9p031 5 Mpixel camera. + +config VIDEO_MT9T001 + tristate "Aptina MT9T001 support" + depends on I2C && VIDEO_DEV + select MEDIA_CONTROLLER + select VIDEO_V4L2_SUBDEV_API + help + This is a Video4Linux2 sensor driver for the Aptina + (Micron) mt0t001 3 Mpixel camera. + +config VIDEO_MT9T112 + tristate "Aptina MT9T111/MT9T112 support" + depends on I2C && VIDEO_DEV + help + This is a Video4Linux2 sensor driver for the Aptina + (Micron) MT9T111 and MT9T112 3 Mpixel camera. + + To compile this driver as a module, choose M here: the + module will be called mt9t112. + +config VIDEO_MT9V011 + tristate "Micron mt9v011 sensor support" + depends on I2C && VIDEO_DEV + help + This is a Video4Linux2 sensor driver for the Micron + mt0v011 1.3 Mpixel camera. It currently only works with the + em28xx driver. + +config VIDEO_MT9V032 + tristate "Micron MT9V032 sensor support" + depends on I2C && VIDEO_DEV + select MEDIA_CONTROLLER + select VIDEO_V4L2_SUBDEV_API + select REGMAP_I2C + select V4L2_FWNODE + help + This is a Video4Linux2 sensor driver for the Micron + MT9V032 752x480 CMOS sensor. + +config VIDEO_MT9V111 + tristate "Aptina MT9V111 sensor support" + depends on I2C && VIDEO_DEV + help + This is a Video4Linux2 sensor driver for the Aptina/Micron + MT9V111 sensor. + + To compile this driver as a module, choose M here: the + module will be called mt9v111. + +config VIDEO_NOON010PC30 + tristate "Siliconfile NOON010PC30 sensor support" + depends on I2C && VIDEO_DEV + select MEDIA_CONTROLLER + select VIDEO_V4L2_SUBDEV_API + help + This driver supports NOON010PC30 CIF camera from Siliconfile + config VIDEO_OG01A1B tristate "OmniVision OG01A1B sensor support" depends on I2C && VIDEO_DEV @@ -961,6 +1062,26 @@ config VIDEO_OV08D10 To compile this driver as a module, choose M here: the module will be called ov08d10. +config VIDEO_OV13858 + tristate "OmniVision OV13858 sensor support" + depends on I2C && VIDEO_DEV + select MEDIA_CONTROLLER + select VIDEO_V4L2_SUBDEV_API + select V4L2_FWNODE + help + This is a Video4Linux2 sensor driver for the OmniVision + OV13858 camera. + +config VIDEO_OV13B10 + tristate "OmniVision OV13B10 sensor support" + depends on I2C && VIDEO_DEV + select MEDIA_CONTROLLER + select VIDEO_V4L2_SUBDEV_API + select V4L2_FWNODE + help + This is a Video4Linux2 sensor driver for the OmniVision + OV13B10 camera. + config VIDEO_OV2640 tristate "OmniVision OV2640 sensor support" depends on VIDEO_DEV && I2C @@ -1072,16 +1193,6 @@ config VIDEO_OV5648 To compile this driver as a module, choose M here: the module will be called ov5648. -config VIDEO_OV6650 - tristate "OmniVision OV6650 sensor support" - depends on I2C && VIDEO_DEV - help - This is a Video4Linux2 sensor driver for the OmniVision - OV6650 camera. - - To compile this driver as a module, choose M here: the - module will be called ov6650. - config VIDEO_OV5670 tristate "OmniVision OV5670 sensor support" depends on I2C && VIDEO_DEV @@ -1130,30 +1241,28 @@ config VIDEO_OV5695 To compile this driver as a module, choose M here: the module will be called ov5695. -config VIDEO_OV7251 - tristate "OmniVision OV7251 sensor support" +config VIDEO_OV6650 + tristate "OmniVision OV6650 sensor support" depends on I2C && VIDEO_DEV - select MEDIA_CONTROLLER - select VIDEO_V4L2_SUBDEV_API - select V4L2_FWNODE help This is a Video4Linux2 sensor driver for the OmniVision - OV7251 camera. + OV6650 camera. To compile this driver as a module, choose M here: the - module will be called ov7251. + module will be called ov6650. -config VIDEO_OV772X - tristate "OmniVision OV772x sensor support" +config VIDEO_OV7251 + tristate "OmniVision OV7251 sensor support" depends on I2C && VIDEO_DEV - select REGMAP_SCCB + select MEDIA_CONTROLLER + select VIDEO_V4L2_SUBDEV_API select V4L2_FWNODE help This is a Video4Linux2 sensor driver for the OmniVision - OV772x camera. + OV7251 camera. To compile this driver as a module, choose M here: the - module will be called ov772x. + module will be called ov7251. config VIDEO_OV7640 tristate "OmniVision OV7640 sensor support" @@ -1174,6 +1283,18 @@ config VIDEO_OV7670 OV7670 VGA camera. It currently only works with the M88ALP01 controller. +config VIDEO_OV772X + tristate "OmniVision OV772x sensor support" + depends on I2C && VIDEO_DEV + select REGMAP_SCCB + select V4L2_FWNODE + help + This is a Video4Linux2 sensor driver for the OmniVision + OV772x camera. + + To compile this driver as a module, choose M here: the + module will be called ov772x. + config VIDEO_OV7740 tristate "OmniVision OV7740 sensor support" depends on I2C && VIDEO_DEV @@ -1253,141 +1374,6 @@ config VIDEO_OV9734 To compile this driver as a module, choose M here: the module's name is ov9734. -config VIDEO_OV13858 - tristate "OmniVision OV13858 sensor support" - depends on I2C && VIDEO_DEV - select MEDIA_CONTROLLER - select VIDEO_V4L2_SUBDEV_API - select V4L2_FWNODE - help - This is a Video4Linux2 sensor driver for the OmniVision - OV13858 camera. - -config VIDEO_OV13B10 - tristate "OmniVision OV13B10 sensor support" - depends on I2C && VIDEO_DEV - select MEDIA_CONTROLLER - select VIDEO_V4L2_SUBDEV_API - select V4L2_FWNODE - help - This is a Video4Linux2 sensor driver for the OmniVision - OV13B10 camera. - -config VIDEO_VS6624 - tristate "ST VS6624 sensor support" - depends on VIDEO_DEV && I2C - help - This is a Video4Linux2 sensor driver for the ST VS6624 - camera. - - To compile this driver as a module, choose M here: the - module will be called vs6624. - -config VIDEO_MT9M001 - tristate "mt9m001 support" - depends on I2C && VIDEO_DEV - select MEDIA_CONTROLLER - select VIDEO_V4L2_SUBDEV_API - help - This driver supports MT9M001 cameras from Micron, monochrome - and colour models. - -config VIDEO_MT9M032 - tristate "MT9M032 camera sensor support" - depends on I2C && VIDEO_DEV - select MEDIA_CONTROLLER - select VIDEO_V4L2_SUBDEV_API - select VIDEO_APTINA_PLL - help - This driver supports MT9M032 camera sensors from Aptina, monochrome - models only. - -config VIDEO_MT9M111 - tristate "mt9m111, mt9m112 and mt9m131 support" - depends on I2C && VIDEO_DEV - select V4L2_FWNODE - help - This driver supports MT9M111, MT9M112 and MT9M131 cameras from - Micron/Aptina - -config VIDEO_MT9P031 - tristate "Aptina MT9P031 support" - depends on I2C && VIDEO_DEV - select MEDIA_CONTROLLER - select VIDEO_V4L2_SUBDEV_API - select VIDEO_APTINA_PLL - select V4L2_FWNODE - help - This is a Video4Linux2 sensor driver for the Aptina - (Micron) mt9p031 5 Mpixel camera. - -config VIDEO_MT9T001 - tristate "Aptina MT9T001 support" - depends on I2C && VIDEO_DEV - select MEDIA_CONTROLLER - select VIDEO_V4L2_SUBDEV_API - help - This is a Video4Linux2 sensor driver for the Aptina - (Micron) mt0t001 3 Mpixel camera. - -config VIDEO_MT9T112 - tristate "Aptina MT9T111/MT9T112 support" - depends on I2C && VIDEO_DEV - help - This is a Video4Linux2 sensor driver for the Aptina - (Micron) MT9T111 and MT9T112 3 Mpixel camera. - - To compile this driver as a module, choose M here: the - module will be called mt9t112. - -config VIDEO_MT9V011 - tristate "Micron mt9v011 sensor support" - depends on I2C && VIDEO_DEV - help - This is a Video4Linux2 sensor driver for the Micron - mt0v011 1.3 Mpixel camera. It currently only works with the - em28xx driver. - -config VIDEO_MT9V032 - tristate "Micron MT9V032 sensor support" - depends on I2C && VIDEO_DEV - select MEDIA_CONTROLLER - select VIDEO_V4L2_SUBDEV_API - select REGMAP_I2C - select V4L2_FWNODE - help - This is a Video4Linux2 sensor driver for the Micron - MT9V032 752x480 CMOS sensor. - -config VIDEO_MT9V111 - tristate "Aptina MT9V111 sensor support" - depends on I2C && VIDEO_DEV - help - This is a Video4Linux2 sensor driver for the Aptina/Micron - MT9V111 sensor. - - To compile this driver as a module, choose M here: the - module will be called mt9v111. - -config VIDEO_SR030PC30 - tristate "Siliconfile SR030PC30 sensor support" - depends on I2C && VIDEO_DEV - help - This driver supports SR030PC30 VGA camera from Siliconfile - -config VIDEO_NOON010PC30 - tristate "Siliconfile NOON010PC30 sensor support" - depends on I2C && VIDEO_DEV - select MEDIA_CONTROLLER - select VIDEO_V4L2_SUBDEV_API - help - This driver supports NOON010PC30 CIF camera from Siliconfile - -source "drivers/media/i2c/m5mols/Kconfig" - -config VIDEO_MAX9271_LIB - tristate - config VIDEO_RDACM20 tristate "IMI RDACM20 camera support" depends on I2C @@ -1426,23 +1412,15 @@ config VIDEO_RJ54N1 To compile this driver as a module, choose M here: the module will be called rj54n1. -config VIDEO_S5K6AA - tristate "Samsung S5K6AAFX sensor support" - depends on I2C && VIDEO_DEV - select MEDIA_CONTROLLER - select VIDEO_V4L2_SUBDEV_API - help - This is a V4L2 sensor driver for Samsung S5K6AA(FX) 1.3M - camera sensor with an embedded SoC image signal processor. - -config VIDEO_S5K6A3 - tristate "Samsung S5K6A3 sensor support" - depends on I2C && VIDEO_DEV +config VIDEO_S5C73M3 + tristate "Samsung S5C73M3 sensor support" + depends on I2C && SPI && VIDEO_DEV select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API + select V4L2_FWNODE help - This is a V4L2 sensor driver for Samsung S5K6A3 raw - camera sensor. + This is a V4L2 sensor driver for Samsung S5C73M3 + 8 Mpixel camera. config VIDEO_S5K4ECGX tristate "Samsung S5K4ECGX sensor support" @@ -1464,18 +1442,43 @@ config VIDEO_S5K5BAF This is a V4L2 sensor driver for Samsung S5K5BAF 2M camera sensor with an embedded SoC image signal processor. -source "drivers/media/i2c/ccs/Kconfig" -source "drivers/media/i2c/et8ek8/Kconfig" +config VIDEO_S5K6A3 + tristate "Samsung S5K6A3 sensor support" + depends on I2C && VIDEO_DEV + select MEDIA_CONTROLLER + select VIDEO_V4L2_SUBDEV_API + help + This is a V4L2 sensor driver for Samsung S5K6A3 raw + camera sensor. -config VIDEO_S5C73M3 - tristate "Samsung S5C73M3 sensor support" - depends on I2C && SPI && VIDEO_DEV +config VIDEO_S5K6AA + tristate "Samsung S5K6AAFX sensor support" + depends on I2C && VIDEO_DEV select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API - select V4L2_FWNODE help - This is a V4L2 sensor driver for Samsung S5C73M3 - 8 Mpixel camera. + This is a V4L2 sensor driver for Samsung S5K6AA(FX) 1.3M + camera sensor with an embedded SoC image signal processor. + +config VIDEO_SR030PC30 + tristate "Siliconfile SR030PC30 sensor support" + depends on I2C && VIDEO_DEV + help + This driver supports SR030PC30 VGA camera from Siliconfile + +config VIDEO_VS6624 + tristate "ST VS6624 sensor support" + depends on VIDEO_DEV && I2C + help + This is a Video4Linux2 sensor driver for the ST VS6624 + camera. + + To compile this driver as a module, choose M here: the + module will be called vs6624. + +source "drivers/media/i2c/ccs/Kconfig" +source "drivers/media/i2c/et8ek8/Kconfig" +source "drivers/media/i2c/m5mols/Kconfig" endmenu @@ -1572,6 +1575,7 @@ config VIDEO_LM3646 help This is a driver for the lm3646 dual flash controllers. It controls flash, torch LEDs. + endmenu endif # VIDEO_DEV |