1 files changed, 452 insertions, 0 deletions

diff --git a/drivers/media/platform/vsp1/vsp1_brx.c b/drivers/media/platform/vsp1/vsp1_brx.c
new file mode 100644
index 000000000000..359917b5d842
--- /dev/null
+++ b/drivers/media/platform/vsp1/vsp1_brx.c
@@ -0,0 +1,452 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * vsp1_brx.c  --  R-Car VSP1 Blend ROP Unit (BRU and BRS)
+ *
+ * Copyright (C) 2013 Renesas Corporation
+ *
+ * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
+ */
+
+#include <linux/device.h>
+#include <linux/gfp.h>
+
+#include <media/v4l2-subdev.h>
+
+#include "vsp1.h"
+#include "vsp1_brx.h"
+#include "vsp1_dl.h"
+#include "vsp1_pipe.h"
+#include "vsp1_rwpf.h"
+#include "vsp1_video.h"
+
+#define BRX_MIN_SIZE				1U
+#define BRX_MAX_SIZE				8190U
+
+/* -----------------------------------------------------------------------------
+ * Device Access
+ */
+
+static inline void vsp1_brx_write(struct vsp1_brx *brx,
+				  struct vsp1_dl_body *dlb, u32 reg, u32 data)
+{
+	vsp1_dl_body_write(dlb, brx->base + reg, data);
+}
+
+/* -----------------------------------------------------------------------------
+ * Controls
+ */
+
+static int brx_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct vsp1_brx *brx =
+		container_of(ctrl->handler, struct vsp1_brx, ctrls);
+
+	switch (ctrl->id) {
+	case V4L2_CID_BG_COLOR:
+		brx->bgcolor = ctrl->val;
+		break;
+	}
+
+	return 0;
+}
+
+static const struct v4l2_ctrl_ops brx_ctrl_ops = {
+	.s_ctrl = brx_s_ctrl,
+};
+
+/* -----------------------------------------------------------------------------
+ * V4L2 Subdevice Operations
+ */
+
+/*
+ * The BRx can't perform format conversion, all sink and source formats must be
+ * identical. We pick the format on the first sink pad (pad 0) and propagate it
+ * to all other pads.
+ */
+
+static int brx_enum_mbus_code(struct v4l2_subdev *subdev,
+			      struct v4l2_subdev_pad_config *cfg,
+			      struct v4l2_subdev_mbus_code_enum *code)
+{
+	static const unsigned int codes[] = {
+		MEDIA_BUS_FMT_ARGB8888_1X32,
+		MEDIA_BUS_FMT_AYUV8_1X32,
+	};
+
+	return vsp1_subdev_enum_mbus_code(subdev, cfg, code, codes,
+					  ARRAY_SIZE(codes));
+}
+
+static int brx_enum_frame_size(struct v4l2_subdev *subdev,
+			       struct v4l2_subdev_pad_config *cfg,
+			       struct v4l2_subdev_frame_size_enum *fse)
+{
+	if (fse->index)
+		return -EINVAL;
+
+	if (fse->code != MEDIA_BUS_FMT_ARGB8888_1X32 &&
+	    fse->code != MEDIA_BUS_FMT_AYUV8_1X32)
+		return -EINVAL;
+
+	fse->min_width = BRX_MIN_SIZE;
+	fse->max_width = BRX_MAX_SIZE;
+	fse->min_height = BRX_MIN_SIZE;
+	fse->max_height = BRX_MAX_SIZE;
+
+	return 0;
+}
+
+static struct v4l2_rect *brx_get_compose(struct vsp1_brx *brx,
+					 struct v4l2_subdev_pad_config *cfg,
+					 unsigned int pad)
+{
+	return v4l2_subdev_get_try_compose(&brx->entity.subdev, cfg, pad);
+}
+
+static void brx_try_format(struct vsp1_brx *brx,
+			   struct v4l2_subdev_pad_config *config,
+			   unsigned int pad, struct v4l2_mbus_framefmt *fmt)
+{
+	struct v4l2_mbus_framefmt *format;
+
+	switch (pad) {
+	case BRX_PAD_SINK(0):
+		/* Default to YUV if the requested format is not supported. */
+		if (fmt->code != MEDIA_BUS_FMT_ARGB8888_1X32 &&
+		    fmt->code != MEDIA_BUS_FMT_AYUV8_1X32)
+			fmt->code = MEDIA_BUS_FMT_AYUV8_1X32;
+		break;
+
+	default:
+		/* The BRx can't perform format conversion. */
+		format = vsp1_entity_get_pad_format(&brx->entity, config,
+						    BRX_PAD_SINK(0));
+		fmt->code = format->code;
+		break;
+	}
+
+	fmt->width = clamp(fmt->width, BRX_MIN_SIZE, BRX_MAX_SIZE);
+	fmt->height = clamp(fmt->height, BRX_MIN_SIZE, BRX_MAX_SIZE);
+	fmt->field = V4L2_FIELD_NONE;
+	fmt->colorspace = V4L2_COLORSPACE_SRGB;
+}
+
+static int brx_set_format(struct v4l2_subdev *subdev,
+			  struct v4l2_subdev_pad_config *cfg,
+			  struct v4l2_subdev_format *fmt)
+{
+	struct vsp1_brx *brx = to_brx(subdev);
+	struct v4l2_subdev_pad_config *config;
+	struct v4l2_mbus_framefmt *format;
+	int ret = 0;
+
+	mutex_lock(&brx->entity.lock);
+
+	config = vsp1_entity_get_pad_config(&brx->entity, cfg, fmt->which);
+	if (!config) {
+		ret = -EINVAL;
+		goto done;
+	}
+
+	brx_try_format(brx, config, fmt->pad, &fmt->format);
+
+	format = vsp1_entity_get_pad_format(&brx->entity, config, fmt->pad);
+	*format = fmt->format;
+
+	/* Reset the compose rectangle */
+	if (fmt->pad != brx->entity.source_pad) {
+		struct v4l2_rect *compose;
+
+		compose = brx_get_compose(brx, config, fmt->pad);
+		compose->left = 0;
+		compose->top = 0;
+		compose->width = format->width;
+		compose->height = format->height;
+	}
+
+	/* Propagate the format code to all pads */
+	if (fmt->pad == BRX_PAD_SINK(0)) {
+		unsigned int i;
+
+		for (i = 0; i <= brx->entity.source_pad; ++i) {
+			format = vsp1_entity_get_pad_format(&brx->entity,
+							    config, i);
+			format->code = fmt->format.code;
+		}
+	}
+
+done:
+	mutex_unlock(&brx->entity.lock);
+	return ret;
+}
+
+static int brx_get_selection(struct v4l2_subdev *subdev,
+			     struct v4l2_subdev_pad_config *cfg,
+			     struct v4l2_subdev_selection *sel)
+{
+	struct vsp1_brx *brx = to_brx(subdev);
+	struct v4l2_subdev_pad_config *config;
+
+	if (sel->pad == brx->entity.source_pad)
+		return -EINVAL;
+
+	switch (sel->target) {
+	case V4L2_SEL_TGT_COMPOSE_BOUNDS:
+		sel->r.left = 0;
+		sel->r.top = 0;
+		sel->r.width = BRX_MAX_SIZE;
+		sel->r.height = BRX_MAX_SIZE;
+		return 0;
+
+	case V4L2_SEL_TGT_COMPOSE:
+		config = vsp1_entity_get_pad_config(&brx->entity, cfg,
+						    sel->which);
+		if (!config)
+			return -EINVAL;
+
+		mutex_lock(&brx->entity.lock);
+		sel->r = *brx_get_compose(brx, config, sel->pad);
+		mutex_unlock(&brx->entity.lock);
+		return 0;
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static int brx_set_selection(struct v4l2_subdev *subdev,
+			     struct v4l2_subdev_pad_config *cfg,
+			     struct v4l2_subdev_selection *sel)
+{
+	struct vsp1_brx *brx = to_brx(subdev);
+	struct v4l2_subdev_pad_config *config;
+	struct v4l2_mbus_framefmt *format;
+	struct v4l2_rect *compose;
+	int ret = 0;
+
+	if (sel->pad == brx->entity.source_pad)
+		return -EINVAL;
+
+	if (sel->target != V4L2_SEL_TGT_COMPOSE)
+		return -EINVAL;
+
+	mutex_lock(&brx->entity.lock);
+
+	config = vsp1_entity_get_pad_config(&brx->entity, cfg, sel->which);
+	if (!config) {
+		ret = -EINVAL;
+		goto done;
+	}
+
+	/*
+	 * The compose rectangle top left corner must be inside the output
+	 * frame.
+	 */
+	format = vsp1_entity_get_pad_format(&brx->entity, config,
+					    brx->entity.source_pad);
+	sel->r.left = clamp_t(unsigned int, sel->r.left, 0, format->width - 1);
+	sel->r.top = clamp_t(unsigned int, sel->r.top, 0, format->height - 1);
+
+	/*
+	 * Scaling isn't supported, the compose rectangle size must be identical
+	 * to the sink format size.
+	 */
+	format = vsp1_entity_get_pad_format(&brx->entity, config, sel->pad);
+	sel->r.width = format->width;
+	sel->r.height = format->height;
+
+	compose = brx_get_compose(brx, config, sel->pad);
+	*compose = sel->r;
+
+done:
+	mutex_unlock(&brx->entity.lock);
+	return ret;
+}
+
+static const struct v4l2_subdev_pad_ops brx_pad_ops = {
+	.init_cfg = vsp1_entity_init_cfg,
+	.enum_mbus_code = brx_enum_mbus_code,
+	.enum_frame_size = brx_enum_frame_size,
+	.get_fmt = vsp1_subdev_get_pad_format,
+	.set_fmt = brx_set_format,
+	.get_selection = brx_get_selection,
+	.set_selection = brx_set_selection,
+};
+
+static const struct v4l2_subdev_ops brx_ops = {
+	.pad    = &brx_pad_ops,
+};
+
+/* -----------------------------------------------------------------------------
+ * VSP1 Entity Operations
+ */
+
+static void brx_configure_stream(struct vsp1_entity *entity,
+				 struct vsp1_pipeline *pipe,
+				 struct vsp1_dl_body *dlb)
+{
+	struct vsp1_brx *brx = to_brx(&entity->subdev);
+	struct v4l2_mbus_framefmt *format;
+	unsigned int flags;
+	unsigned int i;
+
+	format = vsp1_entity_get_pad_format(&brx->entity, brx->entity.config,
+					    brx->entity.source_pad);
+
+	/*
+	 * The hardware is extremely flexible but we have no userspace API to
+	 * expose all the parameters, nor is it clear whether we would have use
+	 * cases for all the supported modes. Let's just harcode the parameters
+	 * to sane default values for now.
+	 */
+
+	/*
+	 * Disable dithering and enable color data normalization unless the
+	 * format at the pipeline output is premultiplied.
+	 */
+	flags = pipe->output ? pipe->output->format.flags : 0;
+	vsp1_brx_write(brx, dlb, VI6_BRU_INCTRL,
+		       flags & V4L2_PIX_FMT_FLAG_PREMUL_ALPHA ?
+		       0 : VI6_BRU_INCTRL_NRM);
+
+	/*
+	 * Set the background position to cover the whole output image and
+	 * configure its color.
+	 */
+	vsp1_brx_write(brx, dlb, VI6_BRU_VIRRPF_SIZE,
+		       (format->width << VI6_BRU_VIRRPF_SIZE_HSIZE_SHIFT) |
+		       (format->height << VI6_BRU_VIRRPF_SIZE_VSIZE_SHIFT));
+	vsp1_brx_write(brx, dlb, VI6_BRU_VIRRPF_LOC, 0);
+
+	vsp1_brx_write(brx, dlb, VI6_BRU_VIRRPF_COL, brx->bgcolor |
+		       (0xff << VI6_BRU_VIRRPF_COL_A_SHIFT));
+
+	/*
+	 * Route BRU input 1 as SRC input to the ROP unit and configure the ROP
+	 * unit with a NOP operation to make BRU input 1 available as the
+	 * Blend/ROP unit B SRC input. Only needed for BRU, the BRS has no ROP
+	 * unit.
+	 */
+	if (entity->type == VSP1_ENTITY_BRU)
+		vsp1_brx_write(brx, dlb, VI6_BRU_ROP,
+			       VI6_BRU_ROP_DSTSEL_BRUIN(1) |
+			       VI6_BRU_ROP_CROP(VI6_ROP_NOP) |
+			       VI6_BRU_ROP_AROP(VI6_ROP_NOP));
+
+	for (i = 0; i < brx->entity.source_pad; ++i) {
+		bool premultiplied = false;
+		u32 ctrl = 0;
+
+		/*
+		 * Configure all Blend/ROP units corresponding to an enabled BRx
+		 * input for alpha blending. Blend/ROP units corresponding to
+		 * disabled BRx inputs are used in ROP NOP mode to ignore the
+		 * SRC input.
+		 */
+		if (brx->inputs[i].rpf) {
+			ctrl |= VI6_BRU_CTRL_RBC;
+
+			premultiplied = brx->inputs[i].rpf->format.flags
+				      & V4L2_PIX_FMT_FLAG_PREMUL_ALPHA;
+		} else {
+			ctrl |= VI6_BRU_CTRL_CROP(VI6_ROP_NOP)
+			     |  VI6_BRU_CTRL_AROP(VI6_ROP_NOP);
+		}
+
+		/*
+		 * Select the virtual RPF as the Blend/ROP unit A DST input to
+		 * serve as a background color.
+		 */
+		if (i == 0)
+			ctrl |= VI6_BRU_CTRL_DSTSEL_VRPF;
+
+		/*
+		 * Route inputs 0 to 3 as SRC inputs to Blend/ROP units A to D
+		 * in that order. In the BRU the Blend/ROP unit B SRC is
+		 * hardwired to the ROP unit output, the corresponding register
+		 * bits must be set to 0. The BRS has no ROP unit and doesn't
+		 * need any special processing.
+		 */
+		if (!(entity->type == VSP1_ENTITY_BRU && i == 1))
+			ctrl |= VI6_BRU_CTRL_SRCSEL_BRUIN(i);
+
+		vsp1_brx_write(brx, dlb, VI6_BRU_CTRL(i), ctrl);
+
+		/*
+		 * Harcode the blending formula to
+		 *
+		 *	DSTc = DSTc * (1 - SRCa) + SRCc * SRCa
+		 *	DSTa = DSTa * (1 - SRCa) + SRCa
+		 *
+		 * when the SRC input isn't premultiplied, and to
+		 *
+		 *	DSTc = DSTc * (1 - SRCa) + SRCc
+		 *	DSTa = DSTa * (1 - SRCa) + SRCa
+		 *
+		 * otherwise.
+		 */
+		vsp1_brx_write(brx, dlb, VI6_BRU_BLD(i),
+			       VI6_BRU_BLD_CCMDX_255_SRC_A |
+			       (premultiplied ? VI6_BRU_BLD_CCMDY_COEFY :
+						VI6_BRU_BLD_CCMDY_SRC_A) |
+			       VI6_BRU_BLD_ACMDX_255_SRC_A |
+			       VI6_BRU_BLD_ACMDY_COEFY |
+			       (0xff << VI6_BRU_BLD_COEFY_SHIFT));
+	}
+}
+
+static const struct vsp1_entity_operations brx_entity_ops = {
+	.configure_stream = brx_configure_stream,
+};
+
+/* -----------------------------------------------------------------------------
+ * Initialization and Cleanup
+ */
+
+struct vsp1_brx *vsp1_brx_create(struct vsp1_device *vsp1,
+				 enum vsp1_entity_type type)
+{
+	struct vsp1_brx *brx;
+	unsigned int num_pads;
+	const char *name;
+	int ret;
+
+	brx = devm_kzalloc(vsp1->dev, sizeof(*brx), GFP_KERNEL);
+	if (brx == NULL)
+		return ERR_PTR(-ENOMEM);
+
+	brx->base = type == VSP1_ENTITY_BRU ? VI6_BRU_BASE : VI6_BRS_BASE;
+	brx->entity.ops = &brx_entity_ops;
+	brx->entity.type = type;
+
+	if (type == VSP1_ENTITY_BRU) {
+		num_pads = vsp1->info->num_bru_inputs + 1;
+		name = "bru";
+	} else {
+		num_pads = 3;
+		name = "brs";
+	}
+
+	ret = vsp1_entity_init(vsp1, &brx->entity, name, num_pads, &brx_ops,
+			       MEDIA_ENT_F_PROC_VIDEO_COMPOSER);
+	if (ret < 0)
+		return ERR_PTR(ret);
+
+	/* Initialize the control handler. */
+	v4l2_ctrl_handler_init(&brx->ctrls, 1);
+	v4l2_ctrl_new_std(&brx->ctrls, &brx_ctrl_ops, V4L2_CID_BG_COLOR,
+			  0, 0xffffff, 1, 0);
+
+	brx->bgcolor = 0;
+
+	brx->entity.subdev.ctrl_handler = &brx->ctrls;
+
+	if (brx->ctrls.error) {
+		dev_err(vsp1->dev, "%s: failed to initialize controls\n", name);
+		ret = brx->ctrls.error;
+		vsp1_entity_destroy(&brx->entity);
+		return ERR_PTR(ret);
+	}
+
+	return brx;
+}