diff options
Diffstat (limited to 'drivers/net/phy/mediatek-ge-soc.c')
-rw-r--r-- | drivers/net/phy/mediatek-ge-soc.c | 435 |
1 files changed, 426 insertions, 9 deletions
diff --git a/drivers/net/phy/mediatek-ge-soc.c b/drivers/net/phy/mediatek-ge-soc.c index da512fab0eb0..8a20d9889f10 100644 --- a/drivers/net/phy/mediatek-ge-soc.c +++ b/drivers/net/phy/mediatek-ge-soc.c @@ -1,9 +1,12 @@ // SPDX-License-Identifier: GPL-2.0+ #include <linux/bitfield.h> +#include <linux/bitmap.h> +#include <linux/mfd/syscon.h> #include <linux/module.h> #include <linux/nvmem-consumer.h> #include <linux/pinctrl/consumer.h> #include <linux/phy.h> +#include <linux/regmap.h> #define MTK_GPHY_ID_MT7981 0x03a29461 #define MTK_GPHY_ID_MT7988 0x03a29481 @@ -206,9 +209,42 @@ #define MTK_PHY_DA_TX_R50_PAIR_C 0x53f #define MTK_PHY_DA_TX_R50_PAIR_D 0x540 +/* Registers on MDIO_MMD_VEND2 */ +#define MTK_PHY_LED0_ON_CTRL 0x24 +#define MTK_PHY_LED1_ON_CTRL 0x26 +#define MTK_PHY_LED_ON_MASK GENMASK(6, 0) +#define MTK_PHY_LED_ON_LINK1000 BIT(0) +#define MTK_PHY_LED_ON_LINK100 BIT(1) +#define MTK_PHY_LED_ON_LINK10 BIT(2) +#define MTK_PHY_LED_ON_LINKDOWN BIT(3) +#define MTK_PHY_LED_ON_FDX BIT(4) /* Full duplex */ +#define MTK_PHY_LED_ON_HDX BIT(5) /* Half duplex */ +#define MTK_PHY_LED_ON_FORCE_ON BIT(6) +#define MTK_PHY_LED_ON_POLARITY BIT(14) +#define MTK_PHY_LED_ON_ENABLE BIT(15) + +#define MTK_PHY_LED0_BLINK_CTRL 0x25 +#define MTK_PHY_LED1_BLINK_CTRL 0x27 +#define MTK_PHY_LED_BLINK_1000TX BIT(0) +#define MTK_PHY_LED_BLINK_1000RX BIT(1) +#define MTK_PHY_LED_BLINK_100TX BIT(2) +#define MTK_PHY_LED_BLINK_100RX BIT(3) +#define MTK_PHY_LED_BLINK_10TX BIT(4) +#define MTK_PHY_LED_BLINK_10RX BIT(5) +#define MTK_PHY_LED_BLINK_COLLISION BIT(6) +#define MTK_PHY_LED_BLINK_RX_CRC_ERR BIT(7) +#define MTK_PHY_LED_BLINK_RX_IDLE_ERR BIT(8) +#define MTK_PHY_LED_BLINK_FORCE_BLINK BIT(9) + +#define MTK_PHY_LED1_DEFAULT_POLARITIES BIT(1) + #define MTK_PHY_RG_BG_RASEL 0x115 #define MTK_PHY_RG_BG_RASEL_MASK GENMASK(2, 0) +/* 'boottrap' register reflecting the configuration of the 4 PHY LEDs */ +#define RG_GPIO_MISC_TPBANK0 0x6f0 +#define RG_GPIO_MISC_TPBANK0_BOOTMODE GENMASK(11, 8) + /* These macro privides efuse parsing for internal phy. */ #define EFS_DA_TX_I2MPB_A(x) (((x) >> 0) & GENMASK(5, 0)) #define EFS_DA_TX_I2MPB_B(x) (((x) >> 6) & GENMASK(5, 0)) @@ -236,13 +272,6 @@ enum { PAIR_D, }; -enum { - GPHY_PORT0, - GPHY_PORT1, - GPHY_PORT2, - GPHY_PORT3, -}; - enum calibration_mode { EFUSE_K, SW_K @@ -261,6 +290,19 @@ enum CAL_MODE { SW_M }; +#define MTK_PHY_LED_STATE_FORCE_ON 0 +#define MTK_PHY_LED_STATE_FORCE_BLINK 1 +#define MTK_PHY_LED_STATE_NETDEV 2 + +struct mtk_socphy_priv { + unsigned long led_state; +}; + +struct mtk_socphy_shared { + u32 boottrap; + struct mtk_socphy_priv priv[4]; +}; + static int mtk_socphy_read_page(struct phy_device *phydev) { return __phy_read(phydev, MTK_EXT_PAGE_ACCESS); @@ -1071,6 +1113,371 @@ static int mt798x_phy_config_init(struct phy_device *phydev) return mt798x_phy_calibration(phydev); } +static int mt798x_phy_hw_led_on_set(struct phy_device *phydev, u8 index, + bool on) +{ + unsigned int bit_on = MTK_PHY_LED_STATE_FORCE_ON + (index ? 16 : 0); + struct mtk_socphy_priv *priv = phydev->priv; + bool changed; + + if (on) + changed = !test_and_set_bit(bit_on, &priv->led_state); + else + changed = !!test_and_clear_bit(bit_on, &priv->led_state); + + changed |= !!test_and_clear_bit(MTK_PHY_LED_STATE_NETDEV + + (index ? 16 : 0), &priv->led_state); + if (changed) + return phy_modify_mmd(phydev, MDIO_MMD_VEND2, index ? + MTK_PHY_LED1_ON_CTRL : MTK_PHY_LED0_ON_CTRL, + MTK_PHY_LED_ON_MASK, + on ? MTK_PHY_LED_ON_FORCE_ON : 0); + else + return 0; +} + +static int mt798x_phy_hw_led_blink_set(struct phy_device *phydev, u8 index, + bool blinking) +{ + unsigned int bit_blink = MTK_PHY_LED_STATE_FORCE_BLINK + (index ? 16 : 0); + struct mtk_socphy_priv *priv = phydev->priv; + bool changed; + + if (blinking) + changed = !test_and_set_bit(bit_blink, &priv->led_state); + else + changed = !!test_and_clear_bit(bit_blink, &priv->led_state); + + changed |= !!test_bit(MTK_PHY_LED_STATE_NETDEV + + (index ? 16 : 0), &priv->led_state); + if (changed) + return phy_write_mmd(phydev, MDIO_MMD_VEND2, index ? + MTK_PHY_LED1_BLINK_CTRL : MTK_PHY_LED0_BLINK_CTRL, + blinking ? MTK_PHY_LED_BLINK_FORCE_BLINK : 0); + else + return 0; +} + +static int mt798x_phy_led_blink_set(struct phy_device *phydev, u8 index, + unsigned long *delay_on, + unsigned long *delay_off) +{ + bool blinking = false; + int err = 0; + + if (index > 1) + return -EINVAL; + + if (delay_on && delay_off && (*delay_on > 0) && (*delay_off > 0)) { + blinking = true; + *delay_on = 50; + *delay_off = 50; + } + + err = mt798x_phy_hw_led_blink_set(phydev, index, blinking); + if (err) + return err; + + return mt798x_phy_hw_led_on_set(phydev, index, false); +} + +static int mt798x_phy_led_brightness_set(struct phy_device *phydev, + u8 index, enum led_brightness value) +{ + int err; + + err = mt798x_phy_hw_led_blink_set(phydev, index, false); + if (err) + return err; + + return mt798x_phy_hw_led_on_set(phydev, index, (value != LED_OFF)); +} + +static const unsigned long supported_triggers = (BIT(TRIGGER_NETDEV_FULL_DUPLEX) | + BIT(TRIGGER_NETDEV_HALF_DUPLEX) | + BIT(TRIGGER_NETDEV_LINK) | + BIT(TRIGGER_NETDEV_LINK_10) | + BIT(TRIGGER_NETDEV_LINK_100) | + BIT(TRIGGER_NETDEV_LINK_1000) | + BIT(TRIGGER_NETDEV_RX) | + BIT(TRIGGER_NETDEV_TX)); + +static int mt798x_phy_led_hw_is_supported(struct phy_device *phydev, u8 index, + unsigned long rules) +{ + if (index > 1) + return -EINVAL; + + /* All combinations of the supported triggers are allowed */ + if (rules & ~supported_triggers) + return -EOPNOTSUPP; + + return 0; +}; + +static int mt798x_phy_led_hw_control_get(struct phy_device *phydev, u8 index, + unsigned long *rules) +{ + unsigned int bit_blink = MTK_PHY_LED_STATE_FORCE_BLINK + (index ? 16 : 0); + unsigned int bit_netdev = MTK_PHY_LED_STATE_NETDEV + (index ? 16 : 0); + unsigned int bit_on = MTK_PHY_LED_STATE_FORCE_ON + (index ? 16 : 0); + struct mtk_socphy_priv *priv = phydev->priv; + int on, blink; + + if (index > 1) + return -EINVAL; + + on = phy_read_mmd(phydev, MDIO_MMD_VEND2, + index ? MTK_PHY_LED1_ON_CTRL : MTK_PHY_LED0_ON_CTRL); + + if (on < 0) + return -EIO; + + blink = phy_read_mmd(phydev, MDIO_MMD_VEND2, + index ? MTK_PHY_LED1_BLINK_CTRL : + MTK_PHY_LED0_BLINK_CTRL); + if (blink < 0) + return -EIO; + + if ((on & (MTK_PHY_LED_ON_LINK1000 | MTK_PHY_LED_ON_LINK100 | + MTK_PHY_LED_ON_LINK10)) || + (blink & (MTK_PHY_LED_BLINK_1000RX | MTK_PHY_LED_BLINK_100RX | + MTK_PHY_LED_BLINK_10RX | MTK_PHY_LED_BLINK_1000TX | + MTK_PHY_LED_BLINK_100TX | MTK_PHY_LED_BLINK_10TX))) + set_bit(bit_netdev, &priv->led_state); + else + clear_bit(bit_netdev, &priv->led_state); + + if (on & MTK_PHY_LED_ON_FORCE_ON) + set_bit(bit_on, &priv->led_state); + else + clear_bit(bit_on, &priv->led_state); + + if (blink & MTK_PHY_LED_BLINK_FORCE_BLINK) + set_bit(bit_blink, &priv->led_state); + else + clear_bit(bit_blink, &priv->led_state); + + if (!rules) + return 0; + + if (on & (MTK_PHY_LED_ON_LINK1000 | MTK_PHY_LED_ON_LINK100 | MTK_PHY_LED_ON_LINK10)) + *rules |= BIT(TRIGGER_NETDEV_LINK); + + if (on & MTK_PHY_LED_ON_LINK10) + *rules |= BIT(TRIGGER_NETDEV_LINK_10); + + if (on & MTK_PHY_LED_ON_LINK100) + *rules |= BIT(TRIGGER_NETDEV_LINK_100); + + if (on & MTK_PHY_LED_ON_LINK1000) + *rules |= BIT(TRIGGER_NETDEV_LINK_1000); + + if (on & MTK_PHY_LED_ON_FDX) + *rules |= BIT(TRIGGER_NETDEV_FULL_DUPLEX); + + if (on & MTK_PHY_LED_ON_HDX) + *rules |= BIT(TRIGGER_NETDEV_HALF_DUPLEX); + + if (blink & (MTK_PHY_LED_BLINK_1000RX | MTK_PHY_LED_BLINK_100RX | MTK_PHY_LED_BLINK_10RX)) + *rules |= BIT(TRIGGER_NETDEV_RX); + + if (blink & (MTK_PHY_LED_BLINK_1000TX | MTK_PHY_LED_BLINK_100TX | MTK_PHY_LED_BLINK_10TX)) + *rules |= BIT(TRIGGER_NETDEV_TX); + + return 0; +}; + +static int mt798x_phy_led_hw_control_set(struct phy_device *phydev, u8 index, + unsigned long rules) +{ + unsigned int bit_netdev = MTK_PHY_LED_STATE_NETDEV + (index ? 16 : 0); + struct mtk_socphy_priv *priv = phydev->priv; + u16 on = 0, blink = 0; + int ret; + + if (index > 1) + return -EINVAL; + + if (rules & BIT(TRIGGER_NETDEV_FULL_DUPLEX)) + on |= MTK_PHY_LED_ON_FDX; + + if (rules & BIT(TRIGGER_NETDEV_HALF_DUPLEX)) + on |= MTK_PHY_LED_ON_HDX; + + if (rules & (BIT(TRIGGER_NETDEV_LINK_10) | BIT(TRIGGER_NETDEV_LINK))) + on |= MTK_PHY_LED_ON_LINK10; + + if (rules & (BIT(TRIGGER_NETDEV_LINK_100) | BIT(TRIGGER_NETDEV_LINK))) + on |= MTK_PHY_LED_ON_LINK100; + + if (rules & (BIT(TRIGGER_NETDEV_LINK_1000) | BIT(TRIGGER_NETDEV_LINK))) + on |= MTK_PHY_LED_ON_LINK1000; + + if (rules & BIT(TRIGGER_NETDEV_RX)) { + blink |= MTK_PHY_LED_BLINK_10RX | + MTK_PHY_LED_BLINK_100RX | + MTK_PHY_LED_BLINK_1000RX; + } + + if (rules & BIT(TRIGGER_NETDEV_TX)) { + blink |= MTK_PHY_LED_BLINK_10TX | + MTK_PHY_LED_BLINK_100TX | + MTK_PHY_LED_BLINK_1000TX; + } + + if (blink || on) + set_bit(bit_netdev, &priv->led_state); + else + clear_bit(bit_netdev, &priv->led_state); + + ret = phy_modify_mmd(phydev, MDIO_MMD_VEND2, index ? + MTK_PHY_LED1_ON_CTRL : + MTK_PHY_LED0_ON_CTRL, + MTK_PHY_LED_ON_FDX | + MTK_PHY_LED_ON_HDX | + MTK_PHY_LED_ON_LINK10 | + MTK_PHY_LED_ON_LINK100 | + MTK_PHY_LED_ON_LINK1000, + on); + + if (ret) + return ret; + + return phy_write_mmd(phydev, MDIO_MMD_VEND2, index ? + MTK_PHY_LED1_BLINK_CTRL : + MTK_PHY_LED0_BLINK_CTRL, blink); +}; + +static bool mt7988_phy_led_get_polarity(struct phy_device *phydev, int led_num) +{ + struct mtk_socphy_shared *priv = phydev->shared->priv; + u32 polarities; + + if (led_num == 0) + polarities = ~(priv->boottrap); + else + polarities = MTK_PHY_LED1_DEFAULT_POLARITIES; + + if (polarities & BIT(phydev->mdio.addr)) + return true; + + return false; +} + +static int mt7988_phy_fix_leds_polarities(struct phy_device *phydev) +{ + struct pinctrl *pinctrl; + int index; + + /* Setup LED polarity according to bootstrap use of LED pins */ + for (index = 0; index < 2; ++index) + phy_modify_mmd(phydev, MDIO_MMD_VEND2, index ? + MTK_PHY_LED1_ON_CTRL : MTK_PHY_LED0_ON_CTRL, + MTK_PHY_LED_ON_POLARITY, + mt7988_phy_led_get_polarity(phydev, index) ? + MTK_PHY_LED_ON_POLARITY : 0); + + /* Only now setup pinctrl to avoid bogus blinking */ + pinctrl = devm_pinctrl_get_select(&phydev->mdio.dev, "gbe-led"); + if (IS_ERR(pinctrl)) + dev_err(&phydev->mdio.bus->dev, "Failed to setup PHY LED pinctrl\n"); + + return 0; +} + +static int mt7988_phy_probe_shared(struct phy_device *phydev) +{ + struct device_node *np = dev_of_node(&phydev->mdio.bus->dev); + struct mtk_socphy_shared *shared = phydev->shared->priv; + struct regmap *regmap; + u32 reg; + int ret; + + /* The LED0 of the 4 PHYs in MT7988 are wired to SoC pins LED_A, LED_B, + * LED_C and LED_D respectively. At the same time those pins are used to + * bootstrap configuration of the reference clock source (LED_A), + * DRAM DDRx16b x2/x1 (LED_B) and boot device (LED_C, LED_D). + * In practise this is done using a LED and a resistor pulling the pin + * either to GND or to VIO. + * The detected value at boot time is accessible at run-time using the + * TPBANK0 register located in the gpio base of the pinctrl, in order + * to read it here it needs to be referenced by a phandle called + * 'mediatek,pio' in the MDIO bus hosting the PHY. + * The 4 bits in TPBANK0 are kept as package shared data and are used to + * set LED polarity for each of the LED0. + */ + regmap = syscon_regmap_lookup_by_phandle(np, "mediatek,pio"); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + ret = regmap_read(regmap, RG_GPIO_MISC_TPBANK0, ®); + if (ret) + return ret; + + shared->boottrap = FIELD_GET(RG_GPIO_MISC_TPBANK0_BOOTMODE, reg); + + return 0; +} + +static void mt798x_phy_leds_state_init(struct phy_device *phydev) +{ + int i; + + for (i = 0; i < 2; ++i) + mt798x_phy_led_hw_control_get(phydev, i, NULL); +} + +static int mt7988_phy_probe(struct phy_device *phydev) +{ + struct mtk_socphy_shared *shared; + struct mtk_socphy_priv *priv; + int err; + + if (phydev->mdio.addr > 3) + return -EINVAL; + + err = devm_phy_package_join(&phydev->mdio.dev, phydev, 0, + sizeof(struct mtk_socphy_shared)); + if (err) + return err; + + if (phy_package_probe_once(phydev)) { + err = mt7988_phy_probe_shared(phydev); + if (err) + return err; + } + + shared = phydev->shared->priv; + priv = &shared->priv[phydev->mdio.addr]; + + phydev->priv = priv; + + mt798x_phy_leds_state_init(phydev); + + err = mt7988_phy_fix_leds_polarities(phydev); + if (err) + return err; + + return mt798x_phy_calibration(phydev); +} + +static int mt7981_phy_probe(struct phy_device *phydev) +{ + struct mtk_socphy_priv *priv; + + priv = devm_kzalloc(&phydev->mdio.dev, sizeof(struct mtk_socphy_priv), + GFP_KERNEL); + if (!priv) + return -ENOMEM; + + phydev->priv = priv; + + mt798x_phy_leds_state_init(phydev); + + return mt798x_phy_calibration(phydev); +} + static struct phy_driver mtk_socphy_driver[] = { { PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7981), @@ -1078,11 +1485,16 @@ static struct phy_driver mtk_socphy_driver[] = { .config_init = mt798x_phy_config_init, .config_intr = genphy_no_config_intr, .handle_interrupt = genphy_handle_interrupt_no_ack, - .probe = mt798x_phy_calibration, + .probe = mt7981_phy_probe, .suspend = genphy_suspend, .resume = genphy_resume, .read_page = mtk_socphy_read_page, .write_page = mtk_socphy_write_page, + .led_blink_set = mt798x_phy_led_blink_set, + .led_brightness_set = mt798x_phy_led_brightness_set, + .led_hw_is_supported = mt798x_phy_led_hw_is_supported, + .led_hw_control_set = mt798x_phy_led_hw_control_set, + .led_hw_control_get = mt798x_phy_led_hw_control_get, }, { PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7988), @@ -1090,11 +1502,16 @@ static struct phy_driver mtk_socphy_driver[] = { .config_init = mt798x_phy_config_init, .config_intr = genphy_no_config_intr, .handle_interrupt = genphy_handle_interrupt_no_ack, - .probe = mt798x_phy_calibration, + .probe = mt7988_phy_probe, .suspend = genphy_suspend, .resume = genphy_resume, .read_page = mtk_socphy_read_page, .write_page = mtk_socphy_write_page, + .led_blink_set = mt798x_phy_led_blink_set, + .led_brightness_set = mt798x_phy_led_brightness_set, + .led_hw_is_supported = mt798x_phy_led_hw_is_supported, + .led_hw_control_set = mt798x_phy_led_hw_control_set, + .led_hw_control_get = mt798x_phy_led_hw_control_get, }, }; |