diff options
Diffstat (limited to 'drivers/staging/tty/epca.c')
-rw-r--r-- | drivers/staging/tty/epca.c | 2784 |
1 files changed, 2784 insertions, 0 deletions
diff --git a/drivers/staging/tty/epca.c b/drivers/staging/tty/epca.c new file mode 100644 index 000000000000..7ad3638967ae --- /dev/null +++ b/drivers/staging/tty/epca.c @@ -0,0 +1,2784 @@ +/* + Copyright (C) 1996 Digi International. + + For technical support please email digiLinux@dgii.com or + call Digi tech support at (612) 912-3456 + + ** This driver is no longer supported by Digi ** + + Much of this design and code came from epca.c which was + copyright (C) 1994, 1995 Troy De Jongh, and subsquently + modified by David Nugent, Christoph Lameter, Mike McLagan. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ +/* See README.epca for change history --DAT*/ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/serial.h> +#include <linux/delay.h> +#include <linux/ctype.h> +#include <linux/tty.h> +#include <linux/tty_flip.h> +#include <linux/slab.h> +#include <linux/ioport.h> +#include <linux/interrupt.h> +#include <linux/uaccess.h> +#include <linux/io.h> +#include <linux/spinlock.h> +#include <linux/pci.h> +#include "digiPCI.h" + + +#include "digi1.h" +#include "digiFep1.h" +#include "epca.h" +#include "epcaconfig.h" + +#define VERSION "1.3.0.1-LK2.6" + +/* This major needs to be submitted to Linux to join the majors list */ +#define DIGIINFOMAJOR 35 /* For Digi specific ioctl */ + + +#define MAXCARDS 7 +#define epcaassert(x, msg) if (!(x)) epca_error(__LINE__, msg) + +#define PFX "epca: " + +static int nbdevs, num_cards, liloconfig; +static int digi_poller_inhibited = 1 ; + +static int setup_error_code; +static int invalid_lilo_config; + +/* + * The ISA boards do window flipping into the same spaces so its only sane with + * a single lock. It's still pretty efficient. This lock guards the hardware + * and the tty_port lock guards the kernel side stuff like use counts. Take + * this lock inside the port lock if you must take both. + */ +static DEFINE_SPINLOCK(epca_lock); + +/* MAXBOARDS is typically 12, but ISA and EISA cards are restricted + to 7 below. */ +static struct board_info boards[MAXBOARDS]; + +static struct tty_driver *pc_driver; +static struct tty_driver *pc_info; + +/* ------------------ Begin Digi specific structures -------------------- */ + +/* + * digi_channels represents an array of structures that keep track of each + * channel of the Digi product. Information such as transmit and receive + * pointers, termio data, and signal definitions (DTR, CTS, etc ...) are stored + * here. This structure is NOT used to overlay the cards physical channel + * structure. + */ +static struct channel digi_channels[MAX_ALLOC]; + +/* + * card_ptr is an array used to hold the address of the first channel structure + * of each card. This array will hold the addresses of various channels located + * in digi_channels. + */ +static struct channel *card_ptr[MAXCARDS]; + +static struct timer_list epca_timer; + +/* + * Begin generic memory functions. These functions will be alias (point at) + * more specific functions dependent on the board being configured. + */ +static void memwinon(struct board_info *b, unsigned int win); +static void memwinoff(struct board_info *b, unsigned int win); +static void globalwinon(struct channel *ch); +static void rxwinon(struct channel *ch); +static void txwinon(struct channel *ch); +static void memoff(struct channel *ch); +static void assertgwinon(struct channel *ch); +static void assertmemoff(struct channel *ch); + +/* ---- Begin more 'specific' memory functions for cx_like products --- */ + +static void pcxem_memwinon(struct board_info *b, unsigned int win); +static void pcxem_memwinoff(struct board_info *b, unsigned int win); +static void pcxem_globalwinon(struct channel *ch); +static void pcxem_rxwinon(struct channel *ch); +static void pcxem_txwinon(struct channel *ch); +static void pcxem_memoff(struct channel *ch); + +/* ------ Begin more 'specific' memory functions for the pcxe ------- */ + +static void pcxe_memwinon(struct board_info *b, unsigned int win); +static void pcxe_memwinoff(struct board_info *b, unsigned int win); +static void pcxe_globalwinon(struct channel *ch); +static void pcxe_rxwinon(struct channel *ch); +static void pcxe_txwinon(struct channel *ch); +static void pcxe_memoff(struct channel *ch); + +/* ---- Begin more 'specific' memory functions for the pc64xe and pcxi ---- */ +/* Note : pc64xe and pcxi share the same windowing routines */ + +static void pcxi_memwinon(struct board_info *b, unsigned int win); +static void pcxi_memwinoff(struct board_info *b, unsigned int win); +static void pcxi_globalwinon(struct channel *ch); +static void pcxi_rxwinon(struct channel *ch); +static void pcxi_txwinon(struct channel *ch); +static void pcxi_memoff(struct channel *ch); + +/* - Begin 'specific' do nothing memory functions needed for some cards - */ + +static void dummy_memwinon(struct board_info *b, unsigned int win); +static void dummy_memwinoff(struct board_info *b, unsigned int win); +static void dummy_globalwinon(struct channel *ch); +static void dummy_rxwinon(struct channel *ch); +static void dummy_txwinon(struct channel *ch); +static void dummy_memoff(struct channel *ch); +static void dummy_assertgwinon(struct channel *ch); +static void dummy_assertmemoff(struct channel *ch); + +static struct channel *verifyChannel(struct tty_struct *); +static void pc_sched_event(struct channel *, int); +static void epca_error(int, char *); +static void pc_close(struct tty_struct *, struct file *); +static void shutdown(struct channel *, struct tty_struct *tty); +static void pc_hangup(struct tty_struct *); +static int pc_write_room(struct tty_struct *); +static int pc_chars_in_buffer(struct tty_struct *); +static void pc_flush_buffer(struct tty_struct *); +static void pc_flush_chars(struct tty_struct *); +static int pc_open(struct tty_struct *, struct file *); +static void post_fep_init(unsigned int crd); +static void epcapoll(unsigned long); +static void doevent(int); +static void fepcmd(struct channel *, int, int, int, int, int); +static unsigned termios2digi_h(struct channel *ch, unsigned); +static unsigned termios2digi_i(struct channel *ch, unsigned); +static unsigned termios2digi_c(struct channel *ch, unsigned); +static void epcaparam(struct tty_struct *, struct channel *); +static void receive_data(struct channel *, struct tty_struct *tty); +static int pc_ioctl(struct tty_struct *, + unsigned int, unsigned long); +static int info_ioctl(struct tty_struct *, + unsigned int, unsigned long); +static void pc_set_termios(struct tty_struct *, struct ktermios *); +static void do_softint(struct work_struct *work); +static void pc_stop(struct tty_struct *); +static void pc_start(struct tty_struct *); +static void pc_throttle(struct tty_struct *tty); +static void pc_unthrottle(struct tty_struct *tty); +static int pc_send_break(struct tty_struct *tty, int msec); +static void setup_empty_event(struct tty_struct *tty, struct channel *ch); + +static int pc_write(struct tty_struct *, const unsigned char *, int); +static int pc_init(void); +static int init_PCI(void); + +/* + * Table of functions for each board to handle memory. Mantaining parallelism + * is a *very* good idea here. The idea is for the runtime code to blindly call + * these functions, not knowing/caring about the underlying hardware. This + * stuff should contain no conditionals; if more functionality is needed a + * different entry should be established. These calls are the interface calls + * and are the only functions that should be accessed. Anyone caught making + * direct calls deserves what they get. + */ +static void memwinon(struct board_info *b, unsigned int win) +{ + b->memwinon(b, win); +} + +static void memwinoff(struct board_info *b, unsigned int win) +{ + b->memwinoff(b, win); +} + +static void globalwinon(struct channel *ch) +{ + ch->board->globalwinon(ch); +} + +static void rxwinon(struct channel *ch) +{ + ch->board->rxwinon(ch); +} + +static void txwinon(struct channel *ch) +{ + ch->board->txwinon(ch); +} + +static void memoff(struct channel *ch) +{ + ch->board->memoff(ch); +} +static void assertgwinon(struct channel *ch) +{ + ch->board->assertgwinon(ch); +} + +static void assertmemoff(struct channel *ch) +{ + ch->board->assertmemoff(ch); +} + +/* PCXEM windowing is the same as that used in the PCXR and CX series cards. */ +static void pcxem_memwinon(struct board_info *b, unsigned int win) +{ + outb_p(FEPWIN | win, b->port + 1); +} + +static void pcxem_memwinoff(struct board_info *b, unsigned int win) +{ + outb_p(0, b->port + 1); +} + +static void pcxem_globalwinon(struct channel *ch) +{ + outb_p(FEPWIN, (int)ch->board->port + 1); +} + +static void pcxem_rxwinon(struct channel *ch) +{ + outb_p(ch->rxwin, (int)ch->board->port + 1); +} + +static void pcxem_txwinon(struct channel *ch) +{ + outb_p(ch->txwin, (int)ch->board->port + 1); +} + +static void pcxem_memoff(struct channel *ch) +{ + outb_p(0, (int)ch->board->port + 1); +} + +/* ----------------- Begin pcxe memory window stuff ------------------ */ +static void pcxe_memwinon(struct board_info *b, unsigned int win) +{ + outb_p(FEPWIN | win, b->port + 1); +} + +static void pcxe_memwinoff(struct board_info *b, unsigned int win) +{ + outb_p(inb(b->port) & ~FEPMEM, b->port + 1); + outb_p(0, b->port + 1); +} + +static void pcxe_globalwinon(struct channel *ch) +{ + outb_p(FEPWIN, (int)ch->board->port + 1); +} + +static void pcxe_rxwinon(struct channel *ch) +{ + outb_p(ch->rxwin, (int)ch->board->port + 1); +} + +static void pcxe_txwinon(struct channel *ch) +{ + outb_p(ch->txwin, (int)ch->board->port + 1); +} + +static void pcxe_memoff(struct channel *ch) +{ + outb_p(0, (int)ch->board->port); + outb_p(0, (int)ch->board->port + 1); +} + +/* ------------- Begin pc64xe and pcxi memory window stuff -------------- */ +static void pcxi_memwinon(struct board_info *b, unsigned int win) +{ + outb_p(inb(b->port) | FEPMEM, b->port); +} + +static void pcxi_memwinoff(struct board_info *b, unsigned int win) +{ + outb_p(inb(b->port) & ~FEPMEM, b->port); +} + +static void pcxi_globalwinon(struct channel *ch) +{ + outb_p(FEPMEM, ch->board->port); +} + +static void pcxi_rxwinon(struct channel *ch) +{ + outb_p(FEPMEM, ch->board->port); +} + +static void pcxi_txwinon(struct channel *ch) +{ + outb_p(FEPMEM, ch->board->port); +} + +static void pcxi_memoff(struct channel *ch) +{ + outb_p(0, ch->board->port); +} + +static void pcxi_assertgwinon(struct channel *ch) +{ + epcaassert(inb(ch->board->port) & FEPMEM, "Global memory off"); +} + +static void pcxi_assertmemoff(struct channel *ch) +{ + epcaassert(!(inb(ch->board->port) & FEPMEM), "Memory on"); +} + +/* + * Not all of the cards need specific memory windowing routines. Some cards + * (Such as PCI) needs no windowing routines at all. We provide these do + * nothing routines so that the same code base can be used. The driver will + * ALWAYS call a windowing routine if it thinks it needs to; regardless of the + * card. However, dependent on the card the routine may or may not do anything. + */ +static void dummy_memwinon(struct board_info *b, unsigned int win) +{ +} + +static void dummy_memwinoff(struct board_info *b, unsigned int win) +{ +} + +static void dummy_globalwinon(struct channel *ch) +{ +} + +static void dummy_rxwinon(struct channel *ch) +{ +} + +static void dummy_txwinon(struct channel *ch) +{ +} + +static void dummy_memoff(struct channel *ch) +{ +} + +static void dummy_assertgwinon(struct channel *ch) +{ +} + +static void dummy_assertmemoff(struct channel *ch) +{ +} + +static struct channel *verifyChannel(struct tty_struct *tty) +{ + /* + * This routine basically provides a sanity check. It insures that the + * channel returned is within the proper range of addresses as well as + * properly initialized. If some bogus info gets passed in + * through tty->driver_data this should catch it. + */ + if (tty) { + struct channel *ch = tty->driver_data; + if (ch >= &digi_channels[0] && ch < &digi_channels[nbdevs]) { + if (ch->magic == EPCA_MAGIC) + return ch; + } + } + return NULL; +} + +static void pc_sched_event(struct channel *ch, int event) +{ + /* + * We call this to schedule interrupt processing on some event. The + * kernel sees our request and calls the related routine in OUR driver. + */ + ch->event |= 1 << event; + schedule_work(&ch->tqueue); +} + +static void epca_error(int line, char *msg) +{ + printk(KERN_ERR "epca_error (Digi): line = %d %s\n", line, msg); +} + +static void pc_close(struct tty_struct *tty, struct file *filp) +{ + struct channel *ch; + struct tty_port *port; + /* + * verifyChannel returns the channel from the tty struct if it is + * valid. This serves as a sanity check. + */ + ch = verifyChannel(tty); + if (ch == NULL) + return; + port = &ch->port; + + if (tty_port_close_start(port, tty, filp) == 0) + return; + + pc_flush_buffer(tty); + shutdown(ch, tty); + + tty_port_close_end(port, tty); + ch->event = 0; /* FIXME: review ch->event locking */ + tty_port_tty_set(port, NULL); +} + +static void shutdown(struct channel *ch, struct tty_struct *tty) +{ + unsigned long flags; + struct board_chan __iomem *bc; + struct tty_port *port = &ch->port; + + if (!(port->flags & ASYNC_INITIALIZED)) + return; + + spin_lock_irqsave(&epca_lock, flags); + + globalwinon(ch); + bc = ch->brdchan; + + /* + * In order for an event to be generated on the receipt of data the + * idata flag must be set. Since we are shutting down, this is not + * necessary clear this flag. + */ + if (bc) + writeb(0, &bc->idata); + + /* If we're a modem control device and HUPCL is on, drop RTS & DTR. */ + if (tty->termios->c_cflag & HUPCL) { + ch->omodem &= ~(ch->m_rts | ch->m_dtr); + fepcmd(ch, SETMODEM, 0, ch->m_dtr | ch->m_rts, 10, 1); + } + memoff(ch); + + /* + * The channel has officialy been closed. The next time it is opened it + * will have to reinitialized. Set a flag to indicate this. + */ + /* Prevent future Digi programmed interrupts from coming active */ + port->flags &= ~ASYNC_INITIALIZED; + spin_unlock_irqrestore(&epca_lock, flags); +} + +static void pc_hangup(struct tty_struct *tty) +{ + struct channel *ch; + + /* + * verifyChannel returns the channel from the tty struct if it is + * valid. This serves as a sanity check. + */ + ch = verifyChannel(tty); + if (ch != NULL) { + pc_flush_buffer(tty); + tty_ldisc_flush(tty); + shutdown(ch, tty); + + ch->event = 0; /* FIXME: review locking of ch->event */ + tty_port_hangup(&ch->port); + } +} + +static int pc_write(struct tty_struct *tty, + const unsigned char *buf, int bytesAvailable) +{ + unsigned int head, tail; + int dataLen; + int size; + int amountCopied; + struct channel *ch; + unsigned long flags; + int remain; + struct board_chan __iomem *bc; + + /* + * pc_write is primarily called directly by the kernel routine + * tty_write (Though it can also be called by put_char) found in + * tty_io.c. pc_write is passed a line discipline buffer where the data + * to be written out is stored. The line discipline implementation + * itself is done at the kernel level and is not brought into the + * driver. + */ + + /* + * verifyChannel returns the channel from the tty struct if it is + * valid. This serves as a sanity check. + */ + ch = verifyChannel(tty); + if (ch == NULL) + return 0; + + /* Make a pointer to the channel data structure found on the board. */ + bc = ch->brdchan; + size = ch->txbufsize; + amountCopied = 0; + + spin_lock_irqsave(&epca_lock, flags); + globalwinon(ch); + + head = readw(&bc->tin) & (size - 1); + tail = readw(&bc->tout); + + if (tail != readw(&bc->tout)) + tail = readw(&bc->tout); + tail &= (size - 1); + + if (head >= tail) { + /* head has not wrapped */ + /* + * remain (much like dataLen above) represents the total amount + * of space available on the card for data. Here dataLen + * represents the space existing between the head pointer and + * the end of buffer. This is important because a memcpy cannot + * be told to automatically wrap around when it hits the buffer + * end. + */ + dataLen = size - head; + remain = size - (head - tail) - 1; + } else { + /* head has wrapped around */ + remain = tail - head - 1; + dataLen = remain; + } + /* + * Check the space on the card. If we have more data than space; reduce + * the amount of data to fit the space. + */ + bytesAvailable = min(remain, bytesAvailable); + txwinon(ch); + while (bytesAvailable > 0) { + /* there is data to copy onto card */ + + /* + * If head is not wrapped, the below will make sure the first + * data copy fills to the end of card buffer. + */ + dataLen = min(bytesAvailable, dataLen); + memcpy_toio(ch->txptr + head, buf, dataLen); + buf += dataLen; + head += dataLen; + amountCopied += dataLen; + bytesAvailable -= dataLen; + + if (head >= size) { + head = 0; + dataLen = tail; + } + } + ch->statusflags |= TXBUSY; + globalwinon(ch); + writew(head, &bc->tin); + + if ((ch->statusflags & LOWWAIT) == 0) { + ch->statusflags |= LOWWAIT; + writeb(1, &bc->ilow); + } + memoff(ch); + spin_unlock_irqrestore(&epca_lock, flags); + return amountCopied; +} + +static int pc_write_room(struct tty_struct *tty) +{ + int remain = 0; + struct channel *ch; + unsigned long flags; + unsigned int head, tail; + struct board_chan __iomem *bc; + /* + * verifyChannel returns the channel from the tty struct if it is + * valid. This serves as a sanity check. + */ + ch = verifyChannel(tty); + if (ch != NULL) { + spin_lock_irqsave(&epca_lock, flags); + globalwinon(ch); + + bc = ch->brdchan; + head = readw(&bc->tin) & (ch->txbufsize - 1); + tail = readw(&bc->tout); + + if (tail != readw(&bc->tout)) + tail = readw(&bc->tout); + /* Wrap tail if necessary */ + tail &= (ch->txbufsize - 1); + remain = tail - head - 1; + if (remain < 0) + remain += ch->txbufsize; + + if (remain && (ch->statusflags & LOWWAIT) == 0) { + ch->statusflags |= LOWWAIT; + writeb(1, &bc->ilow); + } + memoff(ch); + spin_unlock_irqrestore(&epca_lock, flags); + } + /* Return how much room is left on card */ + return remain; +} + +static int pc_chars_in_buffer(struct tty_struct *tty) +{ + int chars; + unsigned int ctail, head, tail; + int remain; + unsigned long flags; + struct channel *ch; + struct board_chan __iomem *bc; + /* + * verifyChannel returns the channel from the tty struct if it is + * valid. This serves as a sanity check. + */ + ch = verifyChannel(tty); + if (ch == NULL) + return 0; + + spin_lock_irqsave(&epca_lock, flags); + globalwinon(ch); + + bc = ch->brdchan; + tail = readw(&bc->tout); + head = readw(&bc->tin); + ctail = readw(&ch->mailbox->cout); + + if (tail == head && readw(&ch->mailbox->cin) == ctail && + readb(&bc->tbusy) == 0) + chars = 0; + else { /* Begin if some space on the card has been used */ + head = readw(&bc->tin) & (ch->txbufsize - 1); + tail &= (ch->txbufsize - 1); + /* + * The logic here is basically opposite of the above + * pc_write_room here we are finding the amount of bytes in the + * buffer filled. Not the amount of bytes empty. + */ + remain = tail - head - 1; + if (remain < 0) + remain += ch->txbufsize; + chars = (int)(ch->txbufsize - remain); + /* + * Make it possible to wakeup anything waiting for output in + * tty_ioctl.c, etc. + * + * If not already set. Setup an event to indicate when the + * transmit buffer empties. + */ + if (!(ch->statusflags & EMPTYWAIT)) + setup_empty_event(tty, ch); + } /* End if some space on the card has been used */ + memoff(ch); + spin_unlock_irqrestore(&epca_lock, flags); + /* Return number of characters residing on card. */ + return chars; +} + +static void pc_flush_buffer(struct tty_struct *tty) +{ + unsigned int tail; + unsigned long flags; + struct channel *ch; + struct board_chan __iomem *bc; + /* + * verifyChannel returns the channel from the tty struct if it is + * valid. This serves as a sanity check. + */ + ch = verifyChannel(tty); + if (ch == NULL) + return; + + spin_lock_irqsave(&epca_lock, flags); + globalwinon(ch); + bc = ch->brdchan; + tail = readw(&bc->tout); + /* Have FEP move tout pointer; effectively flushing transmit buffer */ + fepcmd(ch, STOUT, (unsigned) tail, 0, 0, 0); + memoff(ch); + spin_unlock_irqrestore(&epca_lock, flags); + tty_wakeup(tty); +} + +static void pc_flush_chars(struct tty_struct *tty) +{ + struct channel *ch; + /* + * verifyChannel returns the channel from the tty struct if it is + * valid. This serves as a sanity check. + */ + ch = verifyChannel(tty); + if (ch != NULL) { + unsigned long flags; + spin_lock_irqsave(&epca_lock, flags); + /* + * If not already set and the transmitter is busy setup an + * event to indicate when the transmit empties. + */ + if ((ch->statusflags & TXBUSY) && + !(ch->statusflags & EMPTYWAIT)) + setup_empty_event(tty, ch); + spin_unlock_irqrestore(&epca_lock, flags); + } +} + +static int epca_carrier_raised(struct tty_port *port) +{ + struct channel *ch = container_of(port, struct channel, port); + if (ch->imodem & ch->dcd) + return 1; + return 0; +} + +static void epca_dtr_rts(struct tty_port *port, int onoff) +{ +} + +static int pc_open(struct tty_struct *tty, struct file *filp) +{ + struct channel *ch; + struct tty_port *port; + unsigned long flags; + int line, retval, boardnum; + struct board_chan __iomem *bc; + unsigned int head; + + line = tty->index; + if (line < 0 || line >= nbdevs) + return -ENODEV; + + ch = &digi_channels[line]; + port = &ch->port; + boardnum = ch->boardnum; + + /* Check status of board configured in system. */ + + /* + * I check to see if the epca_setup routine detected a user error. It + * might be better to put this in pc_init, but for the moment it goes + * here. + */ + if (invalid_lilo_config) { + if (setup_error_code & INVALID_BOARD_TYPE) + printk(KERN_ERR "epca: pc_open: Invalid board type specified in kernel options.\n"); + if (setup_error_code & INVALID_NUM_PORTS) + printk(KERN_ERR "epca: pc_open: Invalid number of ports specified in kernel options.\n"); + if (setup_error_code & INVALID_MEM_BASE) + printk(KERN_ERR "epca: pc_open: Invalid board memory address specified in kernel options.\n"); + if (setup_error_code & INVALID_PORT_BASE) + printk(KERN_ERR "epca; pc_open: Invalid board port address specified in kernel options.\n"); + if (setup_error_code & INVALID_BOARD_STATUS) + printk(KERN_ERR "epca: pc_open: Invalid board status specified in kernel options.\n"); + if (setup_error_code & INVALID_ALTPIN) + printk(KERN_ERR "epca: pc_open: Invalid board altpin specified in kernel options;\n"); + tty->driver_data = NULL; /* Mark this device as 'down' */ + return -ENODEV; + } + if (boardnum >= num_cards || boards[boardnum].status == DISABLED) { + tty->driver_data = NULL; /* Mark this device as 'down' */ + return(-ENODEV); + } + + bc = ch->brdchan; + if (bc == NULL) { + tty->driver_data = NULL; + return -ENODEV; + } + + spin_lock_irqsave(&port->lock, flags); + /* + * Every time a channel is opened, increment a counter. This is + * necessary because we do not wish to flush and shutdown the channel + * until the last app holding the channel open, closes it. + */ + port->count++; + /* + * Set a kernel structures pointer to our local channel structure. This + * way we can get to it when passed only a tty struct. + */ + tty->driver_data = ch; + port->tty = tty; + /* + * If this is the first time the channel has been opened, initialize + * the tty->termios struct otherwise let pc_close handle it. + */ + spin_lock(&epca_lock); + globalwinon(ch); + ch->statusflags = 0; + + /* Save boards current modem status */ + ch->imodem = readb(&bc->mstat); + + /* + * Set receive head and tail ptrs to each other. This indicates no data + * available to read. + */ + head = readw(&bc->rin); + writew(head, &bc->rout); + + /* Set the channels associated tty structure */ + + /* + * The below routine generally sets up parity, baud, flow control + * issues, etc.... It effect both control flags and input flags. + */ + epcaparam(tty, ch); + memoff(ch); + spin_unlock(&epca_lock); + port->flags |= ASYNC_INITIALIZED; + spin_unlock_irqrestore(&port->lock, flags); + + retval = tty_port_block_til_ready(port, tty, filp); + if (retval) + return retval; + /* + * Set this again in case a hangup set it to zero while this open() was + * waiting for the line... + */ + spin_lock_irqsave(&port->lock, flags); + port->tty = tty; + spin_lock(&epca_lock); + globalwinon(ch); + /* Enable Digi Data events */ + writeb(1, &bc->idata); + memoff(ch); + spin_unlock(&epca_lock); + spin_unlock_irqrestore(&port->lock, flags); + return 0; +} + +static int __init epca_module_init(void) +{ + return pc_init(); +} +module_init(epca_module_init); + +static struct pci_driver epca_driver; + +static void __exit epca_module_exit(void) +{ + int count, crd; + struct board_info *bd; + struct channel *ch; + + del_timer_sync(&epca_timer); + + if (tty_unregister_driver(pc_driver) || + tty_unregister_driver(pc_info)) { + printk(KERN_WARNING "epca: cleanup_module failed to un-register tty driver\n"); + return; + } + put_tty_driver(pc_driver); + put_tty_driver(pc_info); + + for (crd = 0; crd < num_cards; crd++) { + bd = &boards[crd]; + if (!bd) { /* sanity check */ + printk(KERN_ERR "<Error> - Digi : cleanup_module failed\n"); + return; + } + ch = card_ptr[crd]; + for (count = 0; count < bd->numports; count++, ch++) { + struct tty_struct *tty = tty_port_tty_get(&ch->port); + if (tty) { + tty_hangup(tty); + tty_kref_put(tty); + } + } + } + pci_unregister_driver(&epca_driver); +} +module_exit(epca_module_exit); + +static const struct tty_operations pc_ops = { + .open = pc_open, + .close = pc_close, + .write = pc_write, + .write_room = pc_write_room, + .flush_buffer = pc_flush_buffer, + .chars_in_buffer = pc_chars_in_buffer, + .flush_chars = pc_flush_chars, + .ioctl = pc_ioctl, + .set_termios = pc_set_termios, + .stop = pc_stop, + .start = pc_start, + .throttle = pc_throttle, + .unthrottle = pc_unthrottle, + .hangup = pc_hangup, + .break_ctl = pc_send_break +}; + +static const struct tty_port_operations epca_port_ops = { + .carrier_raised = epca_carrier_raised, + .dtr_rts = epca_dtr_rts, +}; + +static int info_open(struct tty_struct *tty, struct file *filp) +{ + return 0; +} + +static const struct tty_operations info_ops = { + .open = info_open, + .ioctl = info_ioctl, +}; + +static int __init pc_init(void) +{ + int crd; + struct board_info *bd; + unsigned char board_id = 0; + int err = -ENOMEM; + + int pci_boards_found, pci_count; + + pci_count = 0; + + pc_driver = alloc_tty_driver(MAX_ALLOC); + if (!pc_driver) + goto out1; + + pc_info = alloc_tty_driver(MAX_ALLOC); + if (!pc_info) + goto out2; + + /* + * If epca_setup has not been ran by LILO set num_cards to defaults; + * copy board structure defined by digiConfig into drivers board + * structure. Note : If LILO has ran epca_setup then epca_setup will + * handle defining num_cards as well as copying the data into the board + * structure. + */ + if (!liloconfig) { + /* driver has been configured via. epcaconfig */ + nbdevs = NBDEVS; + num_cards = NUMCARDS; + memcpy(&boards, &static_boards, + sizeof(struct board_info) * NUMCARDS); + } + + /* + * Note : If lilo was used to configure the driver and the ignore + * epcaconfig option was choosen (digiepca=2) then nbdevs and num_cards + * will equal 0 at this point. This is okay; PCI cards will still be + * picked up if detected. + */ + + /* + * Set up interrupt, we will worry about memory allocation in + * post_fep_init. + */ + printk(KERN_INFO "DIGI epca driver version %s loaded.\n", VERSION); + + /* + * NOTE : This code assumes that the number of ports found in the + * boards array is correct. This could be wrong if the card in question + * is PCI (And therefore has no ports entry in the boards structure.) + * The rest of the information will be valid for PCI because the + * beginning of pc_init scans for PCI and determines i/o and base + * memory addresses. I am not sure if it is possible to read the number + * of ports supported by the card prior to it being booted (Since that + * is the state it is in when pc_init is run). Because it is not + * possible to query the number of supported ports until after the card + * has booted; we are required to calculate the card_ptrs as the card + * is initialized (Inside post_fep_init). The negative thing about this + * approach is that digiDload's call to GET_INFO will have a bad port + * value. (Since this is called prior to post_fep_init.) + */ + pci_boards_found = 0; + if (num_cards < MAXBOARDS) + pci_boards_found += init_PCI(); + num_cards += pci_boards_found; + + pc_driver->owner = THIS_MODULE; + pc_driver->name = "ttyD"; + pc_driver->major = DIGI_MAJOR; + pc_driver->minor_start = 0; + pc_driver->type = TTY_DRIVER_TYPE_SERIAL; + pc_driver->subtype = SERIAL_TYPE_NORMAL; + pc_driver->init_termios = tty_std_termios; + pc_driver->init_termios.c_iflag = 0; + pc_driver->init_termios.c_oflag = 0; + pc_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | CLOCAL | HUPCL; + pc_driver->init_termios.c_lflag = 0; + pc_driver->init_termios.c_ispeed = 9600; + pc_driver->init_termios.c_ospeed = 9600; + pc_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_HARDWARE_BREAK; + tty_set_operations(pc_driver, &pc_ops); + + pc_info->owner = THIS_MODULE; + pc_info->name = "digi_ctl"; + pc_info->major = DIGIINFOMAJOR; + pc_info->minor_start = 0; + pc_info->type = TTY_DRIVER_TYPE_SERIAL; + pc_info->subtype = SERIAL_TYPE_INFO; + pc_info->init_termios = tty_std_termios; + pc_info->init_termios.c_iflag = 0; + pc_info->init_termios.c_oflag = 0; + pc_info->init_termios.c_lflag = 0; + pc_info->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL; + pc_info->init_termios.c_ispeed = 9600; + pc_info->init_termios.c_ospeed = 9600; + pc_info->flags = TTY_DRIVER_REAL_RAW; + tty_set_operations(pc_info, &info_ops); + + + for (crd = 0; crd < num_cards; crd++) { + /* + * This is where the appropriate memory handlers for the + * hardware is set. Everything at runtime blindly jumps through + * these vectors. + */ + + /* defined in epcaconfig.h */ + bd = &boards[crd]; + + switch (bd->type) { + case PCXEM: + case EISAXEM: + bd->memwinon = pcxem_memwinon; + bd->memwinoff = pcxem_memwinoff; + bd->globalwinon = pcxem_globalwinon; + bd->txwinon = pcxem_txwinon; + bd->rxwinon = pcxem_rxwinon; + bd->memoff = pcxem_memoff; + bd->assertgwinon = dummy_assertgwinon; + bd->assertmemoff = dummy_assertmemoff; + break; + + case PCIXEM: + case PCIXRJ: + case PCIXR: + bd->memwinon = dummy_memwinon; + bd->memwinoff = dummy_memwinoff; + bd->globalwinon = dummy_globalwinon; + bd->txwinon = dummy_txwinon; + bd->rxwinon = dummy_rxwinon; + bd->memoff = dummy_memoff; + bd->assertgwinon = dummy_assertgwinon; + bd->assertmemoff = dummy_assertmemoff; + break; + + case PCXE: + case PCXEVE: + bd->memwinon = pcxe_memwinon; + bd->memwinoff = pcxe_memwinoff; + bd->globalwinon = pcxe_globalwinon; + bd->txwinon = pcxe_txwinon; + bd->rxwinon = pcxe_rxwinon; + bd->memoff = pcxe_memoff; + bd->assertgwinon = dummy_assertgwinon; + bd->assertmemoff = dummy_assertmemoff; + break; + + case PCXI: + case PC64XE: + bd->memwinon = pcxi_memwinon; + bd->memwinoff = pcxi_memwinoff; + bd->globalwinon = pcxi_globalwinon; + bd->txwinon = pcxi_txwinon; + bd->rxwinon = pcxi_rxwinon; + bd->memoff = pcxi_memoff; + bd->assertgwinon = pcxi_assertgwinon; + bd->assertmemoff = pcxi_assertmemoff; + break; + + default: + break; + } + + /* + * Some cards need a memory segment to be defined for use in + * transmit and receive windowing operations. These boards are + * listed in the below switch. In the case of the XI the amount + * of memory on the board is variable so the memory_seg is also + * variable. This code determines what they segment should be. + */ + switch (bd->type) { + case PCXE: + case PCXEVE: + case PC64XE: + bd->memory_seg = 0xf000; + break; + + case PCXI: + board_id = inb((int)bd->port); + if ((board_id & 0x1) == 0x1) { + /* it's an XI card */ + /* Is it a 64K board */ + if ((board_id & 0x30) == 0) + bd->memory_seg = 0xf000; + + /* Is it a 128K board */ + if ((board_id & 0x30) == 0x10) + bd->memory_seg = 0xe000; + + /* Is is a 256K board */ + if ((board_id & 0x30) == 0x20) + bd->memory_seg = 0xc000; + + /* Is it a 512K board */ + if ((board_id & 0x30) == 0x30) + bd->memory_seg = 0x8000; + } else + printk(KERN_ERR "epca: Board at 0x%x doesn't appear to be an XI\n", (int)bd->port); + break; + } + } + + err = tty_register_driver(pc_driver); + if (err) { + printk(KERN_ERR "Couldn't register Digi PC/ driver"); + goto out3; + } + + err = tty_register_driver(pc_info); + if (err) { + printk(KERN_ERR "Couldn't register Digi PC/ info "); + goto out4; + } + + /* Start up the poller to check for events on all enabled boards */ + init_timer(&epca_timer); + epca_timer.function = epcapoll; + mod_timer(&epca_timer, jiffies + HZ/25); + return 0; + +out4: + tty_unregister_driver(pc_driver); +out3: + put_tty_driver(pc_info); +out2: + put_tty_driver(pc_driver); +out1: + return err; +} + +static void post_fep_init(unsigned int crd) +{ + int i; + void __iomem *memaddr; + struct global_data __iomem *gd; + struct board_info *bd; + struct board_chan __iomem *bc; + struct channel *ch; + int shrinkmem = 0, lowwater; + + /* + * This call is made by the user via. the ioctl call DIGI_INIT. It is + * responsible for setting up all the card specific stuff. + */ + bd = &boards[crd]; + + /* + * If this is a PCI board, get the port info. Remember PCI cards do not + * have entries into the epcaconfig.h file, so we can't get the number + * of ports from it. Unfortunetly, this means that anyone doing a + * DIGI_GETINFO before the board has booted will get an invalid number + * of ports returned (It should return 0). Calls to DIGI_GETINFO after + * DIGI_INIT has been called will return the proper values. + */ + if (bd->type >= PCIXEM) { /* Begin get PCI number of ports */ + /* + * Below we use XEMPORTS as a memory offset regardless of which + * PCI card it is. This is because all of the supported PCI + * cards have the same memory offset for the channel data. This + * will have to be changed if we ever develop a PCI/XE card. + * NOTE : The FEP manual states that the port offset is 0xC22 + * as opposed to 0xC02. This is only true for PC/XE, and PC/XI + * cards; not for the XEM, or CX series. On the PCI cards the + * number of ports is determined by reading a ID PROM located + * in the box attached to the card. The card can then determine + * the index the id to determine the number of ports available. + * (FYI - The id should be located at 0x1ac (And may use up to + * 4 bytes if the box in question is a XEM or CX)). + */ + /* PCI cards are already remapped at this point ISA are not */ + bd->numports = readw(bd->re_map_membase + XEMPORTS); + epcaassert(bd->numports <= 64, "PCI returned a invalid number of ports"); + nbdevs += (bd->numports); + } else { + /* Fix up the mappings for ISA/EISA etc */ + /* FIXME: 64K - can we be smarter ? */ + bd->re_map_membase = ioremap_nocache(bd->membase, 0x10000); + } + + if (crd != 0) + card_ptr[crd] = card_ptr[crd-1] + boards[crd-1].numports; + else + card_ptr[crd] = &digi_channels[crd]; /* <- For card 0 only */ + + ch = card_ptr[crd]; + epcaassert(ch <= &digi_channels[nbdevs - 1], "ch out of range"); + + memaddr = bd->re_map_membase; + + /* + * The below assignment will set bc to point at the BEGINING of the + * cards channel structures. For 1 card there will be between 8 and 64 + * of these structures. + */ + bc = memaddr + CHANSTRUCT; + + /* + * The below assignment will set gd to point at the BEGINING of global + * memory address 0xc00. The first data in that global memory actually + * starts at address 0xc1a. The command in pointer begins at 0xd10. + */ + gd = memaddr + GLOBAL; + + /* + * XEPORTS (address 0xc22) points at the number of channels the card + * supports. (For 64XE, XI, XEM, and XR use 0xc02) + */ + if ((bd->type == PCXEVE || bd->type == PCXE) && + (readw(memaddr + XEPORTS) < 3)) + shrinkmem = 1; + if (bd->type < PCIXEM) + if (!request_region((int)bd->port, 4, board_desc[bd->type])) + return; + memwinon(bd, 0); + + /* + * Remember ch is the main drivers channels structure, while bc is the + * cards channel structure. + */ + for (i = 0; i < bd->numports; i++, ch++, bc++) { + unsigned long flags; + u16 tseg, rseg; + + tty_port_init(&ch->port); + ch->port.ops = &epca_port_ops; + ch->brdchan = bc; + ch->mailbox = gd; + INIT_WORK(&ch->tqueue, do_softint); + ch->board = &boards[crd]; + + spin_lock_irqsave(&epca_lock, flags); + switch (bd->type) { + /* + * Since some of the boards use different bitmaps for + * their control signals we cannot hard code these + * values and retain portability. We virtualize this + * data here. + */ + case EISAXEM: + case PCXEM: + case PCIXEM: + case PCIXRJ: + case PCIXR: + ch->m_rts = 0x02; + ch->m_dcd = 0x80; + ch->m_dsr = 0x20; + ch->m_cts = 0x10; + ch->m_ri = 0x40; + ch->m_dtr = 0x01; + break; + + case PCXE: + case PCXEVE: + case PCXI: + case PC64XE: + ch->m_rts = 0x02; + ch->m_dcd = 0x08; + ch->m_dsr = 0x10; + ch->m_cts = 0x20; + ch->m_ri = 0x40; + ch->m_dtr = 0x80; + break; + } + + if (boards[crd].altpin) { + ch->dsr = ch->m_dcd; + ch->dcd = ch->m_dsr; + ch->digiext.digi_flags |= DIGI_ALTPIN; + } else { + ch->dcd = ch->m_dcd; + ch->dsr = ch->m_dsr; + } + + ch->boardnum = crd; + ch->channelnum = i; + ch->magic = EPCA_MAGIC; + tty_port_tty_set(&ch->port, NULL); + + if (shrinkmem) { + fepcmd(ch, SETBUFFER, 32, 0, 0, 0); + shrinkmem = 0; + } + + tseg = readw(&bc->tseg); + rseg = readw(&bc->rseg); + + switch (bd->type) { + case PCIXEM: + case PCIXRJ: + case PCIXR: + /* Cover all the 2MEG cards */ + ch->txptr = memaddr + ((tseg << 4) & 0x1fffff); + ch->rxptr = memaddr + ((rseg << 4) & 0x1fffff); + ch->txwin = FEPWIN | (tseg >> 11); + ch->rxwin = FEPWIN | (rseg >> 11); + break; + + case PCXEM: + case EISAXEM: + /* Cover all the 32K windowed cards */ + /* Mask equal to window size - 1 */ + ch->txptr = memaddr + ((tseg << 4) & 0x7fff); + ch->rxptr = memaddr + ((rseg << 4) & 0x7fff); + ch->txwin = FEPWIN | (tseg >> 11); + ch->rxwin = FEPWIN | (rseg >> 11); + break; + + case PCXEVE: + case PCXE: + ch->txptr = memaddr + (((tseg - bd->memory_seg) << 4) + & 0x1fff); + ch->txwin = FEPWIN | ((tseg - bd->memory_seg) >> 9); + ch->rxptr = memaddr + (((rseg - bd->memory_seg) << 4) + & 0x1fff); + ch->rxwin = FEPWIN | ((rseg - bd->memory_seg) >> 9); + break; + + case PCXI: + case PC64XE: + ch->txptr = memaddr + ((tseg - bd->memory_seg) << 4); + ch->rxptr = memaddr + ((rseg - bd->memory_seg) << 4); + ch->txwin = ch->rxwin = 0; + break; + } + + ch->txbufhead = 0; + ch->txbufsize = readw(&bc->tmax) + 1; + + ch->rxbufhead = 0; + ch->rxbufsize = readw(&bc->rmax) + 1; + + lowwater = ch->txbufsize >= 2000 ? 1024 : (ch->txbufsize / 2); + + /* Set transmitter low water mark */ + fepcmd(ch, STXLWATER, lowwater, 0, 10, 0); + + /* Set receiver low water mark */ + fepcmd(ch, SRXLWATER, (ch->rxbufsize / 4), 0, 10, 0); + + /* Set receiver high water mark */ + fepcmd(ch, SRXHWATER, (3 * ch->rxbufsize / 4), 0, 10, 0); + + writew(100, &bc->edelay); + writeb(1, &bc->idata); + + ch->startc = readb(&bc->startc); + ch->stopc = readb(&bc->stopc); + ch->startca = readb(&bc->startca); + ch->stopca = readb(&bc->stopca); + + ch->fepcflag = 0; + ch->fepiflag = 0; + ch->fepoflag = 0; + ch->fepstartc = 0; + ch->fepstopc = 0; + ch->fepstartca = 0; + ch->fepstopca = 0; + + ch->port.close_delay = 50; + + spin_unlock_irqrestore(&epca_lock, flags); + } + + printk(KERN_INFO + "Digi PC/Xx Driver V%s: %s I/O = 0x%lx Mem = 0x%lx Ports = %d\n", + VERSION, board_desc[bd->type], (long)bd->port, + (long)bd->membase, bd->numports); + memwinoff(bd, 0); +} + +static void epcapoll(unsigned long ignored) +{ + unsigned long flags; + int crd; + unsigned int head, tail; + struct channel *ch; + struct board_info *bd; + + /* + * This routine is called upon every timer interrupt. Even though the + * Digi series cards are capable of generating interrupts this method + * of non-looping polling is more efficient. This routine checks for + * card generated events (Such as receive data, are transmit buffer + * empty) and acts on those events. + */ + for (crd = 0; crd < num_cards; crd++) { + bd = &boards[crd]; + ch = card_ptr[crd]; + + if ((bd->status == DISABLED) || digi_poller_inhibited) + continue; + + /* + * assertmemoff is not needed here; indeed it is an empty + * subroutine. It is being kept because future boards may need + * this as well as some legacy boards. + */ + spin_lock_irqsave(&epca_lock, flags); + + assertmemoff(ch); + + globalwinon(ch); + + /* + * In this case head and tail actually refer to the event queue + * not the transmit or receive queue. + */ + head = readw(&ch->mailbox->ein); + tail = readw(&ch->mailbox->eout); + + /* If head isn't equal to tail we have an event */ + if (head != tail) + doevent(crd); + memoff(ch); + + spin_unlock_irqrestore(&epca_lock, flags); + } /* End for each card */ + mod_timer(&epca_timer, jiffies + (HZ / 25)); +} + +static void doevent(int crd) +{ + void __iomem *eventbuf; + struct channel *ch, *chan0; + static struct tty_struct *tty; + struct board_info *bd; + struct board_chan __iomem *bc; + unsigned int tail, head; + int event, channel; + int mstat, lstat; + + /* + * This subroutine is called by epcapoll when an event is detected + * in the event queue. This routine responds to those events. + */ + bd = &boards[crd]; + + chan0 = card_ptr[crd]; + epcaassert(chan0 <= &digi_channels[nbdevs - 1], "ch out of range"); + assertgwinon(chan0); + while ((tail = readw(&chan0->mailbox->eout)) != + (head = readw(&chan0->mailbox->ein))) { + /* Begin while something in event queue */ + assertgwinon(chan0); + eventbuf = bd->re_map_membase + tail + ISTART; + /* Get the channel the event occurred on */ + channel = readb(eventbuf); + /* Get the actual event code that occurred */ + event = readb(eventbuf + 1); + /* + * The two assignments below get the current modem status + * (mstat) and the previous modem status (lstat). These are + * useful becuase an event could signal a change in modem + * signals itself. + */ + mstat = readb(eventbuf + 2); + lstat = readb(eventbuf + 3); + + ch = chan0 + channel; + if ((unsigned)channel >= bd->numports || !ch) { + if (channel >= bd->numports) + ch = chan0; + bc = ch->brdchan; + goto next; + } + + bc = ch->brdchan; + if (bc == NULL) + goto next; + + tty = tty_port_tty_get(&ch->port); + if (event & DATA_IND) { /* Begin DATA_IND */ + receive_data(ch, tty); + assertgwinon(ch); + } /* End DATA_IND */ + /* else *//* Fix for DCD transition missed bug */ + if (event & MODEMCHG_IND) { + /* A modem signal change has been indicated */ + ch->imodem = mstat; + if (test_bit(ASYNCB_CHECK_CD, &ch->port.flags)) { + /* We are now receiving dcd */ + if (mstat & ch->dcd) + wake_up_interruptible(&ch->port.open_wait); + else /* No dcd; hangup */ + pc_sched_event(ch, EPCA_EVENT_HANGUP); + } + } + if (tty) { + if (event & BREAK_IND) { + /* A break has been indicated */ + tty_insert_flip_char(tty, 0, TTY_BREAK); + tty_schedule_flip(tty); + } else if (event & LOWTX_IND) { + if (ch->statusflags & LOWWAIT) { + ch->statusflags &= ~LOWWAIT; + tty_wakeup(tty); + } + } else if (event & EMPTYTX_IND) { + /* This event is generated by + setup_empty_event */ + ch->statusflags &= ~TXBUSY; + if (ch->statusflags & EMPTYWAIT) { + ch->statusflags &= ~EMPTYWAIT; + tty_wakeup(tty); + } + } + tty_kref_put(tty); + } +next: + globalwinon(ch); + BUG_ON(!bc); + writew(1, &bc->idata); + writew((tail + 4) & (IMAX - ISTART - 4), &chan0->mailbox->eout); + globalwinon(chan0); + } /* End while something in event queue */ +} + +static void fepcmd(struct channel *ch, int cmd, int word_or_byte, + int byte2, int ncmds, int bytecmd) +{ + unchar __iomem *memaddr; + unsigned int head, cmdTail, cmdStart, cmdMax; + long count; + int n; + + /* This is the routine in which commands may be passed to the card. */ + + if (ch->board->status == DISABLED) + return; + assertgwinon(ch); + /* Remember head (As well as max) is just an offset not a base addr */ + head = readw(&ch->mailbox->cin); + /* cmdStart is a base address */ + cmdStart = readw(&ch->mailbox->cstart); + /* + * We do the addition below because we do not want a max pointer + * relative to cmdStart. We want a max pointer that points at the + * physical end of the command queue. + */ + cmdMax = (cmdStart + 4 + readw(&ch->mailbox->cmax)); + memaddr = ch->board->re_map_membase; + + if (head >= (cmdMax - cmdStart) || (head & 03)) { + printk(KERN_ERR "line %d: Out of range, cmd = %x, head = %x\n", + __LINE__, cmd, head); + printk(KERN_ERR "line %d: Out of range, cmdMax = %x, cmdStart = %x\n", + __LINE__, cmdMax, cmdStart); + return; + } + if (bytecmd) { + writeb(cmd, memaddr + head + cmdStart + 0); + writeb(ch->channelnum, memaddr + head + cmdStart + 1); + /* Below word_or_byte is bits to set */ + writeb(word_or_byte, memaddr + head + cmdStart + 2); + /* Below byte2 is bits to reset */ + writeb(byte2, memaddr + head + cmdStart + 3); + } else { + writeb(cmd, memaddr + head + cmdStart + 0); + writeb(ch->channelnum, memaddr + head + cmdStart + 1); + writeb(word_or_byte, memaddr + head + cmdStart + 2); + } + head = (head + 4) & (cmdMax - cmdStart - 4); + writew(head, &ch->mailbox->cin); + count = FEPTIMEOUT; + + for (;;) { + count--; + if (count == 0) { + printk(KERN_ERR "<Error> - Fep not responding in fepcmd()\n"); + return; + } + head = readw(&ch->mailbox->cin); + cmdTail = readw(&ch->mailbox->cout); + n = (head - cmdTail) & (cmdMax - cmdStart - 4); + /* + * Basically this will break when the FEP acknowledges the + * command by incrementing cmdTail (Making it equal to head). + */ + if (n <= ncmds * (sizeof(short) * 4)) + break; + } +} + +/* + * Digi products use fields in their channels structures that are very similar + * to the c_cflag and c_iflag fields typically found in UNIX termios + * structures. The below three routines allow mappings between these hardware + * "flags" and their respective Linux flags. + */ +static unsigned termios2digi_h(struct channel *ch, unsigned cflag) +{ + unsigned res = 0; + + if (cflag & CRTSCTS) { + ch->digiext.digi_flags |= (RTSPACE | CTSPACE); + res |= ((ch->m_cts) | (ch->m_rts)); + } + + if (ch->digiext.digi_flags & RTSPACE) + res |= ch->m_rts; + + if (ch->digiext.digi_flags & DTRPACE) + res |= ch->m_dtr; + + if (ch->digiext.digi_flags & CTSPACE) + res |= ch->m_cts; + + if (ch->digiext.digi_flags & DSRPACE) + res |= ch->dsr; + + if (ch->digiext.digi_flags & DCDPACE) + res |= ch->dcd; + + if (res & (ch->m_rts)) + ch->digiext.digi_flags |= RTSPACE; + + if (res & (ch->m_cts)) + ch->digiext.digi_flags |= CTSPACE; + + return res; +} + +static unsigned termios2digi_i(struct channel *ch, unsigned iflag) +{ + unsigned res = iflag & (IGNBRK | BRKINT | IGNPAR | PARMRK | + INPCK | ISTRIP | IXON | IXANY | IXOFF); + if (ch->digiext.digi_flags & DIGI_AIXON) + res |= IAIXON; + return res; +} + +static unsigned termios2digi_c(struct channel *ch, unsigned cflag) +{ + unsigned res = 0; + if (cflag & CBAUDEX) { + ch->digiext.digi_flags |= DIGI_FAST; + /* + * HUPCL bit is used by FEP to indicate fast baud table is to + * be used. + */ + res |= FEP_HUPCL; + } else + ch->digiext.digi_flags &= ~DIGI_FAST; + /* + * CBAUD has bit position 0x1000 set these days to indicate Linux + * baud rate remap. Digi hardware can't handle the bit assignment. + * (We use a different bit assignment for high speed.). Clear this + * bit out. + */ + res |= cflag & ((CBAUD ^ CBAUDEX) | PARODD | PARENB | CSTOPB | CSIZE); + /* + * This gets a little confusing. The Digi cards have their own + * representation of c_cflags controlling baud rate. For the most part + * this is identical to the Linux implementation. However; Digi + * supports one rate (76800) that Linux doesn't. This means that the + * c_cflag entry that would normally mean 76800 for Digi actually means + * 115200 under Linux. Without the below mapping, a stty 115200 would + * only drive the board at 76800. Since the rate 230400 is also found + * after 76800, the same problem afflicts us when we choose a rate of + * 230400. Without the below modificiation stty 230400 would actually + * give us 115200. + * + * There are two additional differences. The Linux value for CLOCAL + * (0x800; 0004000) has no meaning to the Digi hardware. Also in later + * releases of Linux; the CBAUD define has CBAUDEX (0x1000; 0010000) + * ored into it (CBAUD = 0x100f as opposed to 0xf). CBAUDEX should be + * checked for a screened out prior to termios2digi_c returning. Since + * CLOCAL isn't used by the board this can be ignored as long as the + * returned value is used only by Digi hardware. + */ + if (cflag & CBAUDEX) { + /* + * The below code is trying to guarantee that only baud rates + * 115200 and 230400 are remapped. We use exclusive or because + * the various baud rates share common bit positions and + * therefore can't be tested for easily. + */ + if ((!((cflag & 0x7) ^ (B115200 & ~CBAUDEX))) || + (!((cflag & 0x7) ^ (B230400 & ~CBAUDEX)))) + res += 1; + } + return res; +} + +/* Caller must hold the locks */ +static void epcaparam(struct tty_struct *tty, struct channel *ch) +{ + unsigned int cmdHead; + struct ktermios *ts; + struct board_chan __iomem *bc; + unsigned mval, hflow, cflag, iflag; + + bc = ch->brdchan; + epcaassert(bc != NULL, "bc out of range"); + + assertgwinon(ch); + ts = tty->termios; + if ((ts->c_cflag & CBAUD) == 0) { /* Begin CBAUD detected */ + cmdHead = readw(&bc->rin); + writew(cmdHead, &bc->rout); + cmdHead = readw(&bc->tin); + /* Changing baud in mid-stream transmission can be wonderful */ + /* + * Flush current transmit buffer by setting cmdTail pointer + * (tout) to cmdHead pointer (tin). Hopefully the transmit + * buffer is empty. + */ + fepcmd(ch, STOUT, (unsigned) cmdHead, 0, 0, 0); + mval = 0; + } else { /* Begin CBAUD not detected */ + /* + * c_cflags have changed but that change had nothing to do with + * BAUD. Propagate the change to the card. + */ + cflag = termios2digi_c(ch, ts->c_cflag); + if (cflag != ch->fepcflag) { + ch->fepcflag = cflag; + /* Set baud rate, char size, stop bits, parity */ + fepcmd(ch, SETCTRLFLAGS, (unsigned) cflag, 0, 0, 0); + } + /* + * If the user has not forced CLOCAL and if the device is not a + * CALLOUT device (Which is always CLOCAL) we set flags such + * that the driver will wait on carrier detect. + */ + if (ts->c_cflag & CLOCAL) + clear_bit(ASYNCB_CHECK_CD, &ch->port.flags); + else + set_bit(ASYNCB_CHECK_CD, &ch->port.flags); + mval = ch->m_dtr | ch->m_rts; + } /* End CBAUD not detected */ + iflag = termios2digi_i(ch, ts->c_iflag); + /* Check input mode flags */ + if (iflag != ch->fepiflag) { + ch->fepiflag = iflag; + /* + * Command sets channels iflag structure on the board. Such + * things as input soft flow control, handling of parity + * errors, and break handling are all set here. + * + * break handling, parity handling, input stripping, + * flow control chars + */ + fepcmd(ch, SETIFLAGS, (unsigned int) ch->fepiflag, 0, 0, 0); + } + /* + * Set the board mint value for this channel. This will cause hardware + * events to be generated each time the DCD signal (Described in mint) + * changes. + */ + writeb(ch->dcd, &bc->mint); + if ((ts->c_cflag & CLOCAL) || (ch->digiext.digi_flags & DIGI_FORCEDCD)) + if (ch->digiext.digi_flags & DIGI_FORCEDCD) + writeb(0, &bc->mint); + ch->imodem = readb(&bc->mstat); + hflow = termios2digi_h(ch, ts->c_cflag); + if (hflow != ch->hflow) { + ch->hflow = hflow; + /* + * Hard flow control has been selected but the board is not + * using it. Activate hard flow control now. + */ + fepcmd(ch, SETHFLOW, hflow, 0xff, 0, 1); + } + mval ^= ch->modemfake & (mval ^ ch->modem); + + if (ch->omodem ^ mval) { + ch->omodem = mval; + /* + * The below command sets the DTR and RTS mstat structure. If + * hard flow control is NOT active these changes will drive the + * output of the actual DTR and RTS lines. If hard flow control + * is active, the changes will be saved in the mstat structure + * and only asserted when hard flow control is turned off. + */ + + /* First reset DTR & RTS; then set them */ + fepcmd(ch, SETMODEM, 0, ((ch->m_dtr)|(ch->m_rts)), 0, 1); + fepcmd(ch, SETMODEM, mval, 0, 0, 1); + } + if (ch->startc != ch->fepstartc || ch->stopc != ch->fepstopc) { + ch->fepstartc = ch->startc; + ch->fepstopc = ch->stopc; + /* + * The XON / XOFF characters have changed; propagate these + * changes to the card. + */ + fepcmd(ch, SONOFFC, ch->fepstartc, ch->fepstopc, 0, 1); + } + if (ch->startca != ch->fepstartca || ch->stopca != ch->fepstopca) { + ch->fepstartca = ch->startca; + ch->fepstopca = ch->stopca; + /* + * Similar to the above, this time the auxilarly XON / XOFF + * characters have changed; propagate these changes to the card. + */ + fepcmd(ch, SAUXONOFFC, ch->fepstartca, ch->fepstopca, 0, 1); + } +} + +/* Caller holds lock */ +static void receive_data(struct channel *ch, struct tty_struct *tty) +{ + unchar *rptr; + struct ktermios *ts = NULL; + struct board_chan __iomem *bc; + int dataToRead, wrapgap, bytesAvailable; + unsigned int tail, head; + unsigned int wrapmask; + + /* + * This routine is called by doint when a receive data event has taken + * place. + */ + globalwinon(ch); + if (ch->statusflags & RXSTOPPED) + return; + if (tty) + ts = tty->termios; + bc = ch->brdchan; + BUG_ON(!bc); + wrapmask = ch->rxbufsize - 1; + + /* + * Get the head and tail pointers to the receiver queue. Wrap the head + * pointer if it has reached the end of the buffer. + */ + head = readw(&bc->rin); + head &= wrapmask; + tail = readw(&bc->rout) & wrapmask; + + bytesAvailable = (head - tail) & wrapmask; + if (bytesAvailable == 0) + return; + + /* If CREAD bit is off or device not open, set TX tail to head */ + if (!tty || !ts || !(ts->c_cflag & CREAD)) { + writew(head, &bc->rout); + return; + } + + if (tty_buffer_request_room(tty, bytesAvailable + 1) == 0) + return; + + if (readb(&bc->orun)) { + writeb(0, &bc->orun); + printk(KERN_WARNING "epca; overrun! DigiBoard device %s\n", + tty->name); + tty_insert_flip_char(tty, 0, TTY_OVERRUN); + } + rxwinon(ch); + while (bytesAvailable > 0) { + /* Begin while there is data on the card */ + wrapgap = (head >= tail) ? head - tail : ch->rxbufsize - tail; + /* + * Even if head has wrapped around only report the amount of + * data to be equal to the size - tail. Remember memcpy can't + * automaticly wrap around the receive buffer. + */ + dataToRead = (wrapgap < bytesAvailable) ? wrapgap + : bytesAvailable; + /* Make sure we don't overflow the buffer */ + dataToRead = tty_prepare_flip_string(tty, &rptr, dataToRead); + if (dataToRead == 0) + break; + /* + * Move data read from our card into the line disciplines + * buffer for translation if necessary. + */ + memcpy_fromio(rptr, ch->rxptr + tail, dataToRead); + tail = (tail + dataToRead) & wrapmask; + bytesAvailable -= dataToRead; + } /* End while there is data on the card */ + globalwinon(ch); + writew(tail, &bc->rout); + /* Must be called with global data */ + tty_schedule_flip(tty); +} + +static int info_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + switch (cmd) { + case DIGI_GETINFO: + { + struct digi_info di; + int brd; + + if (get_user(brd, (unsigned int __user *)arg)) + return -EFAULT; + if (brd < 0 || brd >= num_cards || num_cards == 0) + return -ENODEV; + + memset(&di, 0, sizeof(di)); + + di.board = brd; + di.status = boards[brd].status; + di.type = boards[brd].type ; + di.numports = boards[brd].numports ; + /* Legacy fixups - just move along nothing to see */ + di.port = (unsigned char *)boards[brd].port ; + di.membase = (unsigned char *)boards[brd].membase ; + + if (copy_to_user((void __user *)arg, &di, sizeof(di))) + return -EFAULT; + break; + + } + + case DIGI_POLLER: + { + int brd = arg & 0xff000000 >> 16; + unsigned char state = arg & 0xff; + + if (brd < 0 || brd >= num_cards) { + printk(KERN_ERR "epca: DIGI POLLER : brd not valid!\n"); + return -ENODEV; + } + digi_poller_inhibited = state; + break; + } + + case DIGI_INIT: + { + /* + * This call is made by the apps to complete the + * initialization of the board(s). This routine is + * responsible for setting the card to its initial + * state and setting the drivers control fields to the + * sutianle settings for the card in question. + */ + int crd; + for (crd = 0; crd < num_cards; crd++) + post_fep_init(crd); + break; + } + default: + return -ENOTTY; + } + return 0; +} + +static int pc_tiocmget(struct tty_struct *tty) +{ + struct channel *ch = tty->driver_data; + struct board_chan __iomem *bc; + unsigned int mstat, mflag = 0; + unsigned long flags; + + if (ch) + bc = ch->brdchan; + else + return -EINVAL; + + spin_lock_irqsave(&epca_lock, flags); + globalwinon(ch); + mstat = readb(&bc->mstat); + memoff(ch); + spin_unlock_irqrestore(&epca_lock, flags); + + if (mstat & ch->m_dtr) + mflag |= TIOCM_DTR; + if (mstat & ch->m_rts) + mflag |= TIOCM_RTS; + if (mstat & ch->m_cts) + mflag |= TIOCM_CTS; + if (mstat & ch->dsr) + mflag |= TIOCM_DSR; + if (mstat & ch->m_ri) + mflag |= TIOCM_RI; + if (mstat & ch->dcd) + mflag |= TIOCM_CD; + return mflag; +} + +static int pc_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct channel *ch = tty->driver_data; + unsigned long flags; + + if (!ch) + return -EINVAL; + + spin_lock_irqsave(&epca_lock, flags); + /* + * I think this modemfake stuff is broken. It doesn't correctly reflect + * the behaviour desired by the TIOCM* ioctls. Therefore this is + * probably broken. + */ + if (set & TIOCM_RTS) { + ch->modemfake |= ch->m_rts; + ch->modem |= ch->m_rts; + } + if (set & TIOCM_DTR) { + ch->modemfake |= ch->m_dtr; + ch->modem |= ch->m_dtr; + } + if (clear & TIOCM_RTS) { + ch->modemfake |= ch->m_rts; + ch->modem &= ~ch->m_rts; + } + if (clear & TIOCM_DTR) { + ch->modemfake |= ch->m_dtr; + ch->modem &= ~ch->m_dtr; + } + globalwinon(ch); + /* + * The below routine generally sets up parity, baud, flow control + * issues, etc.... It effect both control flags and input flags. + */ + epcaparam(tty, ch); + memoff(ch); + spin_unlock_irqrestore(&epca_lock, flags); + return 0; +} + +static int pc_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + digiflow_t dflow; + unsigned long flags; + unsigned int mflag, mstat; + unsigned char startc, stopc; + struct board_chan __iomem *bc; + struct channel *ch = tty->driver_data; + void __user *argp = (void __user *)arg; + + if (ch) + bc = ch->brdchan; + else + return -EINVAL; + switch (cmd) { + case TIOCMODG: + mflag = pc_tiocmget(tty); + if (put_user(mflag, (unsigned long __user *)argp)) + return -EFAULT; + break; + case TIOCMODS: + if (get_user(mstat, (unsigned __user *)argp)) + return -EFAULT; + return pc_tiocmset(tty, mstat, ~mstat); + case TIOCSDTR: + spin_lock_irqsave(&epca_lock, flags); + ch->omodem |= ch->m_dtr; + globalwinon(ch); + fepcmd(ch, SETMODEM, ch->m_dtr, 0, 10, 1); + memoff(ch); + spin_unlock_irqrestore(&epca_lock, flags); + break; + + case TIOCCDTR: + spin_lock_irqsave(&epca_lock, flags); + ch->omodem &= ~ch->m_dtr; + globalwinon(ch); + fepcmd(ch, SETMODEM, 0, ch->m_dtr, 10, 1); + memoff(ch); + spin_unlock_irqrestore(&epca_lock, flags); + break; + case DIGI_GETA: + if (copy_to_user(argp, &ch->digiext, sizeof(digi_t))) + return -EFAULT; + break; + case DIGI_SETAW: + case DIGI_SETAF: + if (cmd == DIGI_SETAW) { + /* Setup an event to indicate when the transmit + buffer empties */ + spin_lock_irqsave(&epca_lock, flags); + setup_empty_event(tty, ch); + spin_unlock_irqrestore(&epca_lock, flags); + tty_wait_until_sent(tty, 0); + } else { + /* ldisc lock already held in ioctl */ + if (tty->ldisc->ops->flush_buffer) + tty->ldisc->ops->flush_buffer(tty); + } + /* Fall Thru */ + case DIGI_SETA: + if (copy_from_user(&ch->digiext, argp, sizeof(digi_t))) + return -EFAULT; + + if (ch->digiext.digi_flags & DIGI_ALTPIN) { + ch->dcd = ch->m_dsr; + ch->dsr = ch->m_dcd; + } else { + ch->dcd = ch->m_dcd; + ch->dsr = ch->m_dsr; + } + + spin_lock_irqsave(&epca_lock, flags); + globalwinon(ch); + + /* + * The below routine generally sets up parity, baud, flow + * control issues, etc.... It effect both control flags and + * input flags. + */ + epcaparam(tty, ch); + memoff(ch); + spin_unlock_irqrestore(&epca_lock, flags); + break; + + case DIGI_GETFLOW: + case DIGI_GETAFLOW: + spin_lock_irqsave(&epca_lock, flags); + globalwinon(ch); + if (cmd == DIGI_GETFLOW) { + dflow.startc = readb(&bc->startc); + dflow.stopc = readb(&bc->stopc); + } else { + dflow.startc = readb(&bc->startca); + dflow.stopc = readb(&bc->stopca); + } + memoff(ch); + spin_unlock_irqrestore(&epca_lock, flags); + + if (copy_to_user(argp, &dflow, sizeof(dflow))) + return -EFAULT; + break; + + case DIGI_SETAFLOW: + case DIGI_SETFLOW: + if (cmd == DIGI_SETFLOW) { + startc = ch->startc; + stopc = ch->stopc; + } else { + startc = ch->startca; + stopc = ch->stopca; + } + + if (copy_from_user(&dflow, argp, sizeof(dflow))) + return -EFAULT; + + if (dflow.startc != startc || dflow.stopc != stopc) { + /* Begin if setflow toggled */ + spin_lock_irqsave(&epca_lock, flags); + globalwinon(ch); + + if (cmd == DIGI_SETFLOW) { + ch->fepstartc = ch->startc = dflow.startc; + ch->fepstopc = ch->stopc = dflow.stopc; + fepcmd(ch, SONOFFC, ch->fepstartc, + ch->fepstopc, 0, 1); + } else { + ch->fepstartca = ch->startca = dflow.startc; + ch->fepstopca = ch->stopca = dflow.stopc; + fepcmd(ch, SAUXONOFFC, ch->fepstartca, + ch->fepstopca, 0, 1); + } + + if (ch->statusflags & TXSTOPPED) + pc_start(tty); + + memoff(ch); + spin_unlock_irqrestore(&epca_lock, flags); + } /* End if setflow toggled */ + break; + default: + return -ENOIOCTLCMD; + } + return 0; +} + +static void pc_set_termios(struct tty_struct *tty, struct ktermios *old_termios) +{ + struct channel *ch; + unsigned long flags; + /* + * verifyChannel returns the channel from the tty struct if it is + * valid. This serves as a sanity check. + */ + ch = verifyChannel(tty); + + if (ch != NULL) { /* Begin if channel valid */ + spin_lock_irqsave(&epca_lock, flags); + globalwinon(ch); + epcaparam(tty, ch); + memoff(ch); + spin_unlock_irqrestore(&epca_lock, flags); + + if ((old_termios->c_cflag & CRTSCTS) && + ((tty->termios->c_cflag & CRTSCTS) == 0)) + tty->hw_stopped = 0; + + if (!(old_termios->c_cflag & CLOCAL) && + (tty->termios->c_cflag & CLOCAL)) + wake_up_interruptible(&ch->port.open_wait); + + } /* End if channel valid */ +} + +static void do_softint(struct work_struct *work) +{ + struct channel *ch = container_of(work, struct channel, tqueue); + /* Called in response to a modem change event */ + if (ch && ch->magic == EPCA_MAGIC) { + struct tty_struct *tty = tty_port_tty_get(&ch->port); + + if (tty && tty->driver_data) { + if (test_and_clear_bit(EPCA_EVENT_HANGUP, &ch->event)) { + tty_hangup(tty); + wake_up_interruptible(&ch->port.open_wait); + clear_bit(ASYNCB_NORMAL_ACTIVE, + &ch->port.flags); + } + } + tty_kref_put(tty); + } +} + +/* + * pc_stop and pc_start provide software flow control to the routine and the + * pc_ioctl routine. + */ +static void pc_stop(struct tty_struct *tty) +{ + struct channel *ch; + unsigned long flags; + /* + * verifyChannel returns the channel from the tty struct if it is + * valid. This serves as a sanity check. + */ + ch = verifyChannel(tty); + if (ch != NULL) { + spin_lock_irqsave(&epca_lock, flags); + if ((ch->statusflags & TXSTOPPED) == 0) { + /* Begin if transmit stop requested */ + globalwinon(ch); + /* STOP transmitting now !! */ + fepcmd(ch, PAUSETX, 0, 0, 0, 0); + ch->statusflags |= TXSTOPPED; + memoff(ch); + } /* End if transmit stop requested */ + spin_unlock_irqrestore(&epca_lock, flags); + } +} + +static void pc_start(struct tty_struct *tty) +{ + struct channel *ch; + /* + * verifyChannel returns the channel from the tty struct if it is + * valid. This serves as a sanity check. + */ + ch = verifyChannel(tty); + if (ch != NULL) { + unsigned long flags; + spin_lock_irqsave(&epca_lock, flags); + /* Just in case output was resumed because of a change + in Digi-flow */ + if (ch->statusflags & TXSTOPPED) { + /* Begin transmit resume requested */ + struct board_chan __iomem *bc; + globalwinon(ch); + bc = ch->brdchan; + if (ch->statusflags & LOWWAIT) + writeb(1, &bc->ilow); + /* Okay, you can start transmitting again... */ + fepcmd(ch, RESUMETX, 0, 0, 0, 0); + ch->statusflags &= ~TXSTOPPED; + memoff(ch); + } /* End transmit resume requested */ + spin_unlock_irqrestore(&epca_lock, flags); + } +} + +/* + * The below routines pc_throttle and pc_unthrottle are used to slow (And + * resume) the receipt of data into the kernels receive buffers. The exact + * occurrence of this depends on the size of the kernels receive buffer and + * what the 'watermarks' are set to for that buffer. See the n_ttys.c file for + * more details. + */ +static void pc_throttle(struct tty_struct *tty) +{ + struct channel *ch; + unsigned long flags; + /* + * verifyChannel returns the channel from the tty struct if it is + * valid. This serves as a sanity check. + */ + ch = verifyChannel(tty); + if (ch != NULL) { + spin_lock_irqsave(&epca_lock, flags); + if ((ch->statusflags & RXSTOPPED) == 0) { + globalwinon(ch); + fepcmd(ch, PAUSERX, 0, 0, 0, 0); + ch->statusflags |= RXSTOPPED; + memoff(ch); + } + spin_unlock_irqrestore(&epca_lock, flags); + } +} + +static void pc_unthrottle(struct tty_struct *tty) +{ + struct channel *ch; + unsigned long flags; + /* + * verifyChannel returns the channel from the tty struct if it is + * valid. This serves as a sanity check. + */ + ch = verifyChannel(tty); + if (ch != NULL) { + /* Just in case output was resumed because of a change + in Digi-flow */ + spin_lock_irqsave(&epca_lock, flags); + if (ch->statusflags & RXSTOPPED) { + globalwinon(ch); + fepcmd(ch, RESUMERX, 0, 0, 0, 0); + ch->statusflags &= ~RXSTOPPED; + memoff(ch); + } + spin_unlock_irqrestore(&epca_lock, flags); + } +} + +static int pc_send_break(struct tty_struct *tty, int msec) +{ + struct channel *ch = tty->driver_data; + unsigned long flags; + + if (msec == -1) + msec = 0xFFFF; + else if (msec > 0xFFFE) + msec = 0xFFFE; + else if (msec < 1) + msec = 1; + + spin_lock_irqsave(&epca_lock, flags); + globalwinon(ch); + /* + * Maybe I should send an infinite break here, schedule() for msec + * amount of time, and then stop the break. This way, the user can't + * screw up the FEP by causing digi_send_break() to be called (i.e. via + * an ioctl()) more than once in msec amount of time. + * Try this for now... + */ + fepcmd(ch, SENDBREAK, msec, 0, 10, 0); + memoff(ch); + spin_unlock_irqrestore(&epca_lock, flags); + return 0; +} + +/* Caller MUST hold the lock */ +static void setup_empty_event(struct tty_struct *tty, struct channel *ch) +{ + struct board_chan __iomem *bc = ch->brdchan; + + globalwinon(ch); + ch->statusflags |= EMPTYWAIT; + /* + * When set the iempty flag request a event to be generated when the + * transmit buffer is empty (If there is no BREAK in progress). + */ + writeb(1, &bc->iempty); + memoff(ch); +} + +#ifndef MODULE +static void __init epca_setup(char *str, int *ints) +{ + struct board_info board; + int index, loop, last; + char *temp, *t2; + unsigned len; + + /* + * If this routine looks a little strange it is because it is only + * called if a LILO append command is given to boot the kernel with + * parameters. In this way, we can provide the user a method of + * changing his board configuration without rebuilding the kernel. + */ + if (!liloconfig) + liloconfig = 1; + + memset(&board, 0, sizeof(board)); + + /* Assume the data is int first, later we can change it */ + /* I think that array position 0 of ints holds the number of args */ + for (last = 0, index = 1; index <= ints[0]; index++) + switch (index) { /* Begin parse switch */ + case 1: + board.status = ints[index]; + /* + * We check for 2 (As opposed to 1; because 2 is a flag + * instructing the driver to ignore epcaconfig.) For + * this reason we check for 2. + */ + if (board.status == 2) { + /* Begin ignore epcaconfig as well as lilo cmd line */ + nbdevs = 0; + num_cards = 0; + return; + } /* End ignore epcaconfig as well as lilo cmd line */ + + if (board.status > 2) { + printk(KERN_ERR "epca_setup: Invalid board status 0x%x\n", + board.status); + invalid_lilo_config = 1; + setup_error_code |= INVALID_BOARD_STATUS; + return; + } + last = index; + break; + case 2: + board.type = ints[index]; + if (board.type >= PCIXEM) { + printk(KERN_ERR "epca_setup: Invalid board type 0x%x\n", board.type); + invalid_lilo_config = 1; + setup_error_code |= INVALID_BOARD_TYPE; + return; + } + last = index; + break; + case 3: + board.altpin = ints[index]; + if (board.altpin > 1) { + printk(KERN_ERR "epca_setup: Invalid board altpin 0x%x\n", board.altpin); + invalid_lilo_config = 1; + setup_error_code |= INVALID_ALTPIN; + return; + } + last = index; + break; + + case 4: + board.numports = ints[index]; + if (board.numports < 2 || board.numports > 256) { + printk(KERN_ERR "epca_setup: Invalid board numports 0x%x\n", board.numports); + invalid_lilo_config = 1; + setup_error_code |= INVALID_NUM_PORTS; + return; + } + nbdevs += board.numports; + last = index; + break; + + case 5: + board.port = ints[index]; + if (ints[index] <= 0) { + printk(KERN_ERR "epca_setup: Invalid io port 0x%x\n", (unsigned int)board.port); + invalid_lilo_config = 1; + setup_error_code |= INVALID_PORT_BASE; + return; + } + last = index; + break; + + case 6: + board.membase = ints[index]; + if (ints[index] <= 0) { + printk(KERN_ERR "epca_setup: Invalid memory base 0x%x\n", + (unsigned int)board.membase); + invalid_lilo_config = 1; + setup_error_code |= INVALID_MEM_BASE; + return; + } + last = index; + break; + + default: + printk(KERN_ERR "<Error> - epca_setup: Too many integer parms\n"); + return; + + } /* End parse switch */ + + while (str && *str) { /* Begin while there is a string arg */ + /* find the next comma or terminator */ + temp = str; + /* While string is not null, and a comma hasn't been found */ + while (*temp && (*temp != ',')) + temp++; + if (!*temp) + temp = NULL; + else + *temp++ = 0; + /* Set index to the number of args + 1 */ + index = last + 1; + + switch (index) { + case 1: + len = strlen(str); + if (strncmp("Disable", str, len) == 0) + board.status = 0; + else if (strncmp("Enable", str, len) == 0) + board.status = 1; + else { + printk(KERN_ERR "epca_setup: Invalid status %s\n", str); + invalid_lilo_config = 1; + setup_error_code |= INVALID_BOARD_STATUS; + return; + } + last = index; + break; + + case 2: + for (loop = 0; loop < EPCA_NUM_TYPES; loop++) + if (strcmp(board_desc[loop], str) == 0) + break; + /* + * If the index incremented above refers to a + * legitamate board type set it here. + */ + if (index < EPCA_NUM_TYPES) + board.type = loop; + else { + printk(KERN_ERR "epca_setup: Invalid board type: %s\n", str); + invalid_lilo_config = 1; + setup_error_code |= INVALID_BOARD_TYPE; + return; + } + last = index; + break; + + case 3: + len = strlen(str); + if (strncmp("Disable", str, len) == 0) + board.altpin = 0; + else if (strncmp("Enable", str, len) == 0) + board.altpin = 1; + else { + printk(KERN_ERR "epca_setup: Invalid altpin %s\n", str); + invalid_lilo_config = 1; + setup_error_code |= INVALID_ALTPIN; + return; + } + last = index; + break; + + case 4: + t2 = str; + while (isdigit(*t2)) + t2++; + + if (*t2) { + printk(KERN_ERR "epca_setup: Invalid port count %s\n", str); + invalid_lilo_config = 1; + setup_error_code |= INVALID_NUM_PORTS; + return; + } + + /* + * There is not a man page for simple_strtoul but the + * code can be found in vsprintf.c. The first argument + * is the string to translate (To an unsigned long + * obviously), the second argument can be the address + * of any character variable or a NULL. If a variable + * is given, the end pointer of the string will be + * stored in that variable; if a NULL is given the end + * pointer will not be returned. The last argument is + * the base to use. If a 0 is indicated, the routine + * will attempt to determine the proper base by looking + * at the values prefix (A '0' for octal, a 'x' for + * hex, etc ... If a value is given it will use that + * value as the base. + */ + board.numports = simple_strtoul(str, NULL, 0); + nbdevs += board.numports; + last = index; + break; + + case 5: + t2 = str; + while (isxdigit(*t2)) + t2++; + + if (*t2) { + printk(KERN_ERR "epca_setup: Invalid i/o address %s\n", str); + invalid_lilo_config = 1; + setup_error_code |= INVALID_PORT_BASE; + return; + } + + board.port = simple_strtoul(str, NULL, 16); + last = index; + break; + + case 6: + t2 = str; + while (isxdigit(*t2)) + t2++; + + if (*t2) { + printk(KERN_ERR "epca_setup: Invalid memory base %s\n", str); + invalid_lilo_config = 1; + setup_error_code |= INVALID_MEM_BASE; + return; + } + board.membase = simple_strtoul(str, NULL, 16); + last = index; + break; + default: + printk(KERN_ERR "epca: Too many string parms\n"); + return; + } + str = temp; + } /* End while there is a string arg */ + + if (last < 6) { + printk(KERN_ERR "epca: Insufficient parms specified\n"); + return; + } + + /* I should REALLY validate the stuff here */ + /* Copies our local copy of board into boards */ + memcpy((void *)&boards[num_cards], (void *)&board, sizeof(board)); + /* Does this get called once per lilo arg are what ? */ + printk(KERN_INFO "PC/Xx: Added board %i, %s %i ports at 0x%4.4X base 0x%6.6X\n", + num_cards, board_desc[board.type], + board.numports, (int)board.port, (unsigned int) board.membase); + num_cards++; +} + +static int __init epca_real_setup(char *str) +{ + int ints[11]; + + epca_setup(get_options(str, 11, ints), ints); + return 1; +} + +__setup("digiepca", epca_real_setup); +#endif + +enum epic_board_types { + brd_xr = 0, + brd_xem, + brd_cx, + brd_xrj, +}; + +/* indexed directly by epic_board_types enum */ +static struct { + unsigned char board_type; + unsigned bar_idx; /* PCI base address region */ +} epca_info_tbl[] = { + { PCIXR, 0, }, + { PCIXEM, 0, }, + { PCICX, 0, }, + { PCIXRJ, 2, }, +}; + +static int __devinit epca_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + static int board_num = -1; + int board_idx, info_idx = ent->driver_data; + unsigned long addr; + + if (pci_enable_device(pdev)) + return -EIO; + + board_num++; + board_idx = board_num + num_cards; + if (board_idx >= MAXBOARDS) + goto err_out; + + addr = pci_resource_start(pdev, epca_info_tbl[info_idx].bar_idx); + if (!addr) { + printk(KERN_ERR PFX "PCI region #%d not available (size 0)\n", + epca_info_tbl[info_idx].bar_idx); + goto err_out; + } + + boards[board_idx].status = ENABLED; + boards[board_idx].type = epca_info_tbl[info_idx].board_type; + boards[board_idx].numports = 0x0; + boards[board_idx].port = addr + PCI_IO_OFFSET; + boards[board_idx].membase = addr; + + if (!request_mem_region(addr + PCI_IO_OFFSET, 0x200000, "epca")) { + printk(KERN_ERR PFX "resource 0x%x @ 0x%lx unavailable\n", + 0x200000, addr + PCI_IO_OFFSET); + goto err_out; + } + + boards[board_idx].re_map_port = ioremap_nocache(addr + PCI_IO_OFFSET, + 0x200000); + if (!boards[board_idx].re_map_port) { + printk(KERN_ERR PFX "cannot map 0x%x @ 0x%lx\n", + 0x200000, addr + PCI_IO_OFFSET); + goto err_out_free_pciio; + } + + if (!request_mem_region(addr, 0x200000, "epca")) { + printk(KERN_ERR PFX "resource 0x%x @ 0x%lx unavailable\n", + 0x200000, addr); + goto err_out_free_iounmap; + } + + boards[board_idx].re_map_membase = ioremap_nocache(addr, 0x200000); + if (!boards[board_idx].re_map_membase) { + printk(KERN_ERR PFX "cannot map 0x%x @ 0x%lx\n", + 0x200000, addr + PCI_IO_OFFSET); + goto err_out_free_memregion; + } + + /* + * I don't know what the below does, but the hardware guys say its + * required on everything except PLX (In this case XRJ). + */ + if (info_idx != brd_xrj) { + pci_write_config_byte(pdev, 0x40, 0); + pci_write_config_byte(pdev, 0x46, 0); + } + + return 0; + +err_out_free_memregion: + release_mem_region(addr, 0x200000); +err_out_free_iounmap: + iounmap(boards[board_idx].re_map_port); +err_out_free_pciio: + release_mem_region(addr + PCI_IO_OFFSET, 0x200000); +err_out: + return -ENODEV; +} + + +static struct pci_device_id epca_pci_tbl[] = { + { PCI_VENDOR_DIGI, PCI_DEVICE_XR, PCI_ANY_ID, PCI_ANY_ID, 0, 0, brd_xr }, + { PCI_VENDOR_DIGI, PCI_DEVICE_XEM, PCI_ANY_ID, PCI_ANY_ID, 0, 0, brd_xem }, + { PCI_VENDOR_DIGI, PCI_DEVICE_CX, PCI_ANY_ID, PCI_ANY_ID, 0, 0, brd_cx }, + { PCI_VENDOR_DIGI, PCI_DEVICE_XRJ, PCI_ANY_ID, PCI_ANY_ID, 0, 0, brd_xrj }, + { 0, } +}; + +MODULE_DEVICE_TABLE(pci, epca_pci_tbl); + +static int __init init_PCI(void) +{ + memset(&epca_driver, 0, sizeof(epca_driver)); + epca_driver.name = "epca"; + epca_driver.id_table = epca_pci_tbl; + epca_driver.probe = epca_init_one; + + return pci_register_driver(&epca_driver); +} + +MODULE_LICENSE("GPL"); |