diff options
Diffstat (limited to 'drivers/usb/host/xhci-ring.c')
| -rw-r--r-- | drivers/usb/host/xhci-ring.c | 88 |
1 files changed, 45 insertions, 43 deletions
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index f5b0e1ce22af..eb788c60c1c0 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1833,7 +1833,8 @@ static void xhci_cavium_reset_phy_quirk(struct xhci_hcd *xhci) } static void handle_port_status(struct xhci_hcd *xhci, - union xhci_trb *event) + struct xhci_interrupter *ir, + union xhci_trb *event) { struct usb_hcd *hcd; u32 port_id; @@ -1856,7 +1857,7 @@ static void handle_port_status(struct xhci_hcd *xhci, if ((port_id <= 0) || (port_id > max_ports)) { xhci_warn(xhci, "Port change event with invalid port ID %d\n", port_id); - inc_deq(xhci, xhci->event_ring); + inc_deq(xhci, ir->event_ring); return; } @@ -1923,7 +1924,7 @@ static void handle_port_status(struct xhci_hcd *xhci, goto cleanup; } else if (!test_bit(hcd_portnum, &bus_state->resuming_ports)) { xhci_dbg(xhci, "resume HS port %d\n", port_id); - bus_state->resume_done[hcd_portnum] = jiffies + + port->resume_timestamp = jiffies + msecs_to_jiffies(USB_RESUME_TIMEOUT); set_bit(hcd_portnum, &bus_state->resuming_ports); /* Do the rest in GetPortStatus after resume time delay. @@ -1932,7 +1933,7 @@ static void handle_port_status(struct xhci_hcd *xhci, */ set_bit(HCD_FLAG_POLL_RH, &hcd->flags); mod_timer(&hcd->rh_timer, - bus_state->resume_done[hcd_portnum]); + port->resume_timestamp); usb_hcd_start_port_resume(&hcd->self, hcd_portnum); bogus_port_status = true; } @@ -1944,7 +1945,7 @@ static void handle_port_status(struct xhci_hcd *xhci, (portsc & PORT_PLS_MASK) == XDEV_U1 || (portsc & PORT_PLS_MASK) == XDEV_U2)) { xhci_dbg(xhci, "resume SS port %d finished\n", port_id); - complete(&bus_state->u3exit_done[hcd_portnum]); + complete(&port->u3exit_done); /* We've just brought the device into U0/1/2 through either the * Resume state after a device remote wakeup, or through the * U3Exit state after a host-initiated resume. If it's a device @@ -1969,10 +1970,9 @@ static void handle_port_status(struct xhci_hcd *xhci, * RExit to a disconnect state). If so, let the driver know it's * out of the RExit state. */ - if (!DEV_SUPERSPEED_ANY(portsc) && hcd->speed < HCD_USB3 && - test_and_clear_bit(hcd_portnum, - &bus_state->rexit_ports)) { - complete(&bus_state->rexit_done[hcd_portnum]); + if (hcd->speed < HCD_USB3 && port->rexit_active) { + complete(&port->rexit_done); + port->rexit_active = false; bogus_port_status = true; goto cleanup; } @@ -1986,7 +1986,7 @@ static void handle_port_status(struct xhci_hcd *xhci, cleanup: /* Update event ring dequeue pointer before dropping the lock */ - inc_deq(xhci, xhci->event_ring); + inc_deq(xhci, ir->event_ring); /* Don't make the USB core poll the roothub if we got a bad port status * change event. Besides, at that point we can't tell which roothub @@ -2519,7 +2519,8 @@ finish_td: * At this point, the host controller is probably hosed and should be reset. */ static int handle_tx_event(struct xhci_hcd *xhci, - struct xhci_transfer_event *event) + struct xhci_interrupter *ir, + struct xhci_transfer_event *event) { struct xhci_virt_ep *ep; struct xhci_ring *ep_ring; @@ -2531,7 +2532,6 @@ static int handle_tx_event(struct xhci_hcd *xhci, union xhci_trb *ep_trb; int status = -EINPROGRESS; struct xhci_ep_ctx *ep_ctx; - struct list_head *tmp; u32 trb_comp_code; int td_num = 0; bool handling_skipped_tds = false; @@ -2585,10 +2585,8 @@ static int handle_tx_event(struct xhci_hcd *xhci, } /* Count current td numbers if ep->skip is set */ - if (ep->skip) { - list_for_each(tmp, &ep_ring->td_list) - td_num++; - } + if (ep->skip) + td_num += list_count_nodes(&ep_ring->td_list); /* Look for common error cases */ switch (trb_comp_code) { @@ -2871,7 +2869,7 @@ cleanup: * processing missed tds. */ if (!handling_skipped_tds) - inc_deq(xhci, xhci->event_ring); + inc_deq(xhci, ir->event_ring); /* * If ep->skip is set, it means there are missed tds on the @@ -2886,8 +2884,8 @@ cleanup: err_out: xhci_err(xhci, "@%016llx %08x %08x %08x %08x\n", (unsigned long long) xhci_trb_virt_to_dma( - xhci->event_ring->deq_seg, - xhci->event_ring->dequeue), + ir->event_ring->deq_seg, + ir->event_ring->dequeue), lower_32_bits(le64_to_cpu(event->buffer)), upper_32_bits(le64_to_cpu(event->buffer)), le32_to_cpu(event->transfer_len), @@ -2901,7 +2899,7 @@ err_out: * Returns >0 for "possibly more events to process" (caller should call again), * otherwise 0 if done. In future, <0 returns should indicate error code. */ -static int xhci_handle_event(struct xhci_hcd *xhci) +static int xhci_handle_event(struct xhci_hcd *xhci, struct xhci_interrupter *ir) { union xhci_trb *event; int update_ptrs = 1; @@ -2909,18 +2907,18 @@ static int xhci_handle_event(struct xhci_hcd *xhci) int ret; /* Event ring hasn't been allocated yet. */ - if (!xhci->event_ring || !xhci->event_ring->dequeue) { - xhci_err(xhci, "ERROR event ring not ready\n"); + if (!ir || !ir->event_ring || !ir->event_ring->dequeue) { + xhci_err(xhci, "ERROR interrupter not ready\n"); return -ENOMEM; } - event = xhci->event_ring->dequeue; + event = ir->event_ring->dequeue; /* Does the HC or OS own the TRB? */ if ((le32_to_cpu(event->event_cmd.flags) & TRB_CYCLE) != - xhci->event_ring->cycle_state) + ir->event_ring->cycle_state) return 0; - trace_xhci_handle_event(xhci->event_ring, &event->generic); + trace_xhci_handle_event(ir->event_ring, &event->generic); /* * Barrier between reading the TRB_CYCLE (valid) flag above and any @@ -2935,11 +2933,11 @@ static int xhci_handle_event(struct xhci_hcd *xhci) handle_cmd_completion(xhci, &event->event_cmd); break; case TRB_PORT_STATUS: - handle_port_status(xhci, event); + handle_port_status(xhci, ir, event); update_ptrs = 0; break; case TRB_TRANSFER: - ret = handle_tx_event(xhci, &event->trans_event); + ret = handle_tx_event(xhci, ir, &event->trans_event); if (ret >= 0) update_ptrs = 0; break; @@ -2963,7 +2961,7 @@ static int xhci_handle_event(struct xhci_hcd *xhci) if (update_ptrs) /* Update SW event ring dequeue pointer */ - inc_deq(xhci, xhci->event_ring); + inc_deq(xhci, ir->event_ring); /* Are there more items on the event ring? Caller will call us again to * check. @@ -2977,16 +2975,17 @@ static int xhci_handle_event(struct xhci_hcd *xhci) * - To avoid "Event Ring Full Error" condition */ static void xhci_update_erst_dequeue(struct xhci_hcd *xhci, - union xhci_trb *event_ring_deq) + struct xhci_interrupter *ir, + union xhci_trb *event_ring_deq) { u64 temp_64; dma_addr_t deq; - temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue); + temp_64 = xhci_read_64(xhci, &ir->ir_set->erst_dequeue); /* If necessary, update the HW's version of the event ring deq ptr. */ - if (event_ring_deq != xhci->event_ring->dequeue) { - deq = xhci_trb_virt_to_dma(xhci->event_ring->deq_seg, - xhci->event_ring->dequeue); + if (event_ring_deq != ir->event_ring->dequeue) { + deq = xhci_trb_virt_to_dma(ir->event_ring->deq_seg, + ir->event_ring->dequeue); if (deq == 0) xhci_warn(xhci, "WARN something wrong with SW event ring dequeue ptr\n"); /* @@ -3004,7 +3003,7 @@ static void xhci_update_erst_dequeue(struct xhci_hcd *xhci, /* Clear the event handler busy flag (RW1C) */ temp_64 |= ERST_EHB; - xhci_write_64(xhci, temp_64, &xhci->ir_set->erst_dequeue); + xhci_write_64(xhci, temp_64, &ir->ir_set->erst_dequeue); } /* @@ -3016,6 +3015,7 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); union xhci_trb *event_ring_deq; + struct xhci_interrupter *ir; irqreturn_t ret = IRQ_NONE; u64 temp_64; u32 status; @@ -3053,11 +3053,13 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd) status |= STS_EINT; writel(status, &xhci->op_regs->status); + /* This is the handler of the primary interrupter */ + ir = xhci->interrupter; if (!hcd->msi_enabled) { u32 irq_pending; - irq_pending = readl(&xhci->ir_set->irq_pending); + irq_pending = readl(&ir->ir_set->irq_pending); irq_pending |= IMAN_IP; - writel(irq_pending, &xhci->ir_set->irq_pending); + writel(irq_pending, &ir->ir_set->irq_pending); } if (xhci->xhc_state & XHCI_STATE_DYING || @@ -3067,22 +3069,22 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd) /* Clear the event handler busy flag (RW1C); * the event ring should be empty. */ - temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue); + temp_64 = xhci_read_64(xhci, &ir->ir_set->erst_dequeue); xhci_write_64(xhci, temp_64 | ERST_EHB, - &xhci->ir_set->erst_dequeue); + &ir->ir_set->erst_dequeue); ret = IRQ_HANDLED; goto out; } - event_ring_deq = xhci->event_ring->dequeue; + event_ring_deq = ir->event_ring->dequeue; /* FIXME this should be a delayed service routine * that clears the EHB. */ - while (xhci_handle_event(xhci) > 0) { + while (xhci_handle_event(xhci, ir) > 0) { if (event_loop++ < TRBS_PER_SEGMENT / 2) continue; - xhci_update_erst_dequeue(xhci, event_ring_deq); - event_ring_deq = xhci->event_ring->dequeue; + xhci_update_erst_dequeue(xhci, ir, event_ring_deq); + event_ring_deq = ir->event_ring->dequeue; /* ring is half-full, force isoc trbs to interrupt more often */ if (xhci->isoc_bei_interval > AVOID_BEI_INTERVAL_MIN) @@ -3091,7 +3093,7 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd) event_loop = 0; } - xhci_update_erst_dequeue(xhci, event_ring_deq); + xhci_update_erst_dequeue(xhci, ir, event_ring_deq); ret = IRQ_HANDLED; out: |