6 files changed, 86 insertions, 16 deletions
diff --git a/tools/perf/Documentation/Makefile b/tools/perf/Documentation/Makefile
index bd498d496952..4626a398836a 100644
--- a/tools/perf/Documentation/Makefile
+++ b/tools/perf/Documentation/Makefile
@@ -178,8 +178,8 @@ install-pdf: pdf
 	$(INSTALL) -d -m 755 $(DESTDIR)$(pdfdir)
 	$(INSTALL) -m 644 user-manual.pdf $(DESTDIR)$(pdfdir)
 
-install-html: html
-	'$(SHELL_PATH_SQ)' ./install-webdoc.sh $(DESTDIR)$(htmldir)
+#install-html: html
+#	'$(SHELL_PATH_SQ)' ./install-webdoc.sh $(DESTDIR)$(htmldir)
 
 ../PERF-VERSION-FILE: .FORCE-PERF-VERSION-FILE
 	$(QUIET_SUBDIR0)../ $(QUIET_SUBDIR1) PERF-VERSION-FILE
@@ -288,15 +288,16 @@ $(patsubst %.txt,%.html,$(wildcard howto/*.txt)): %.html : %.txt
 	sed -e '1,/^$$/d' $< | $(ASCIIDOC) -b xhtml11 - >$@+ && \
 	mv $@+ $@
 
-install-webdoc : html
-	'$(SHELL_PATH_SQ)' ./install-webdoc.sh $(WEBDOC_DEST)
+# UNIMPLEMENTED
+#install-webdoc : html
+#	'$(SHELL_PATH_SQ)' ./install-webdoc.sh $(WEBDOC_DEST)
 
-quick-install: quick-install-man
+# quick-install: quick-install-man
 
-quick-install-man:
-	'$(SHELL_PATH_SQ)' ./install-doc-quick.sh $(DOC_REF) $(DESTDIR)$(mandir)
+# quick-install-man:
+#	'$(SHELL_PATH_SQ)' ./install-doc-quick.sh $(DOC_REF) $(DESTDIR)$(mandir)
 
-quick-install-html:
-	'$(SHELL_PATH_SQ)' ./install-doc-quick.sh $(HTML_REF) $(DESTDIR)$(htmldir)
+#quick-install-html:
+#	'$(SHELL_PATH_SQ)' ./install-doc-quick.sh $(HTML_REF) $(DESTDIR)$(htmldir)
 
 .PHONY: .FORCE-PERF-VERSION-FILE
diff --git a/tools/perf/Documentation/perf-list.txt b/tools/perf/Documentation/perf-list.txt
index 399751befeed..7a527f7e9da9 100644
--- a/tools/perf/Documentation/perf-list.txt
+++ b/tools/perf/Documentation/perf-list.txt
@@ -8,7 +8,7 @@ perf-list - List all symbolic event types
 SYNOPSIS
 --------
 [verse]
-'perf list'
+'perf list' [hw|sw|cache|tracepoint|event_glob]
 
 DESCRIPTION
 -----------
@@ -63,7 +63,26 @@ details. Some of them are referenced in the SEE ALSO section below.
 
 OPTIONS
 -------
-None
+
+Without options all known events will be listed.
+
+To limit the list use:
+
+. 'hw' or 'hardware' to list hardware events such as cache-misses, etc.
+
+. 'sw' or 'software' to list software events such as context switches, etc.
+
+. 'cache' or 'hwcache' to list hardware cache events such as L1-dcache-loads, etc.
+
+. 'tracepoint' to list all tracepoint events, alternatively use
+  'subsys_glob:event_glob' to filter by tracepoint subsystems such as sched,
+  block, etc.
+
+. If none of the above is matched, it will apply the supplied glob to all
+  events, printing the ones that match.
+
+One or more types can be used at the same time, listing the events for the
+types specified.
 
 SEE ALSO
 --------
diff --git a/tools/perf/Documentation/perf-lock.txt b/tools/perf/Documentation/perf-lock.txt
index 921de259ea10..4a26a2f3a6a3 100644
--- a/tools/perf/Documentation/perf-lock.txt
+++ b/tools/perf/Documentation/perf-lock.txt
@@ -24,8 +24,8 @@ and statistics with this 'perf lock' command.
 
   'perf lock report' reports statistical data.
 
-OPTIONS
--------
+COMMON OPTIONS
+--------------
 
 -i::
 --input=<file>::
@@ -39,6 +39,14 @@ OPTIONS
 --dump-raw-trace::
         Dump raw trace in ASCII.
 
+REPORT OPTIONS
+--------------
+
+-k::
+--key=<value>::
+        Sorting key. Possible values: acquired (default), contended,
+        wait_total, wait_max, wait_min.
+
 SEE ALSO
 --------
 linkperf:perf[1]
diff --git a/tools/perf/Documentation/perf-probe.txt b/tools/perf/Documentation/perf-probe.txt
index 86b797a35aa6..02bafce4b341 100644
--- a/tools/perf/Documentation/perf-probe.txt
+++ b/tools/perf/Documentation/perf-probe.txt
@@ -16,7 +16,7 @@ or
 or
 'perf probe' --list
 or
-'perf probe' [options] --line='FUNC[:RLN[+NUM|:RLN2]]|SRC:ALN[+NUM|:ALN2]'
+'perf probe' [options] --line='LINE'
 or
 'perf probe' [options] --vars='PROBEPOINT'
 
@@ -73,6 +73,17 @@ OPTIONS
 	(Only for --vars) Show external defined variables in addition to local
 	variables.
 
+-F::
+--funcs::
+	Show available functions in given module or kernel.
+
+--filter=FILTER::
+	(Only for --vars and --funcs) Set filter. FILTER is a combination of glob
+	pattern, see FILTER PATTERN for detail.
+	Default FILTER is "!__k???tab_* & !__crc_*" for --vars, and "!_*"
+	for --funcs.
+	If several filters are specified, only the last filter is used.
+
 -f::
 --force::
 	Forcibly add events with existing name.
@@ -117,13 +128,14 @@ LINE SYNTAX
 -----------
 Line range is described by following syntax.
 
- "FUNC[:RLN[+NUM|-RLN2]]|SRC[:ALN[+NUM|-ALN2]]"
+ "FUNC[@SRC][:RLN[+NUM|-RLN2]]|SRC[:ALN[+NUM|-ALN2]]"
 
 FUNC specifies the function name of showing lines. 'RLN' is the start line
 number from function entry line, and 'RLN2' is the end line number. As same as
 probe syntax, 'SRC' means the source file path, 'ALN' is start line number,
 and 'ALN2' is end line number in the file. It is also possible to specify how
-many lines to show by using 'NUM'.
+many lines to show by using 'NUM'. Moreover, 'FUNC@SRC' combination is good
+for searching a specific function when several functions share same name.
 So, "source.c:100-120" shows lines between 100th to l20th in source.c file. And "func:10+20" shows 20 lines from 10th line of func function.
 
 LAZY MATCHING
@@ -135,6 +147,14 @@ e.g.
 
 This provides some sort of flexibility and robustness to probe point definitions against minor code changes. For example, actual 10th line of schedule() can be moved easily by modifying schedule(), but the same line matching 'rq=cpu_rq*' may still exist in the function.)
 
+FILTER PATTERN
+--------------
+ The filter pattern is a glob matching pattern(s) to filter variables.
+ In addition, you can use "!" for specifying filter-out rule. You also can give several rules combined with "&" or "|", and fold those rules as one rule by using "(" ")".
+
+e.g.
+ With --filter "foo* | bar*", perf probe -V shows variables which start with "foo" or "bar".
+ With --filter "!foo* & *bar", perf probe -V shows variables which don't start with "foo" and end with "bar", like "fizzbar". But "foobar" is filtered out.
 
 EXAMPLES
 --------
diff --git a/tools/perf/Documentation/perf-record.txt b/tools/perf/Documentation/perf-record.txt
index e032716c839b..5a520f825295 100644
--- a/tools/perf/Documentation/perf-record.txt
+++ b/tools/perf/Documentation/perf-record.txt
@@ -137,6 +137,17 @@ Do not update the builid cache. This saves some overhead in situations
 where the information in the perf.data file (which includes buildids)
 is sufficient.
 
+-G name,...::
+--cgroup name,...::
+monitor only in the container (cgroup) called "name". This option is available only
+in per-cpu mode. The cgroup filesystem must be mounted. All threads belonging to
+container "name" are monitored when they run on the monitored CPUs. Multiple cgroups
+can be provided. Each cgroup is applied to the corresponding event, i.e., first cgroup
+to first event, second cgroup to second event and so on. It is possible to provide
+an empty cgroup (monitor all the time) using, e.g., -G foo,,bar. Cgroups must have
+corresponding events, i.e., they always refer to events defined earlier on the command
+line.
+
 SEE ALSO
 --------
 linkperf:perf-stat[1], linkperf:perf-list[1]
diff --git a/tools/perf/Documentation/perf-stat.txt b/tools/perf/Documentation/perf-stat.txt
index b6da7affbbee..918cc38ee6d1 100644
--- a/tools/perf/Documentation/perf-stat.txt
+++ b/tools/perf/Documentation/perf-stat.txt
@@ -83,6 +83,17 @@ This option is only valid in system-wide mode.
 print counts using a CSV-style output to make it easy to import directly into
 spreadsheets. Columns are separated by the string specified in SEP.
 
+-G name::
+--cgroup name::
+monitor only in the container (cgroup) called "name". This option is available only
+in per-cpu mode. The cgroup filesystem must be mounted. All threads belonging to
+container "name" are monitored when they run on the monitored CPUs. Multiple cgroups
+can be provided. Each cgroup is applied to the corresponding event, i.e., first cgroup
+to first event, second cgroup to second event and so on. It is possible to provide
+an empty cgroup (monitor all the time) using, e.g., -G foo,,bar. Cgroups must have
+corresponding events, i.e., they always refer to events defined earlier on the command
+line.
+
 EXAMPLES
 --------