diff options
Diffstat (limited to 'tools/testing/selftests/drivers')
4 files changed, 45 insertions, 91 deletions
diff --git a/tools/testing/selftests/drivers/net/mlxsw/qos_defprio.sh b/tools/testing/selftests/drivers/net/mlxsw/qos_defprio.sh index 71066bc4b886..5492fa5550d7 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/qos_defprio.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/qos_defprio.sh @@ -5,18 +5,18 @@ # prioritized according to the default priority specified at the port. # rx_octets_prio_* counters are used to verify the prioritization. # -# +-----------------------+ -# | H1 | -# | + $h1 | -# | | 192.0.2.1/28 | -# +----|------------------+ +# +----------------------------------+ +# | H1 | +# | + $h1 | +# | | 192.0.2.1/28 | +# +----|-----------------------------+ # | -# +----|------------------+ -# | SW | | -# | + $swp1 | -# | 192.0.2.2/28 | -# | APP=<prio>,1,0 | -# +-----------------------+ +# +----|-----------------------------+ +# | SW | | +# | + $swp1 | +# | 192.0.2.2/28 | +# | dcb app default-prio <prio> | +# +----------------------------------+ ALL_TESTS=" ping_ipv4 @@ -29,42 +29,6 @@ NUM_NETIFS=2 : ${HIT_TIMEOUT:=1000} # ms source $lib_dir/lib.sh -declare -a APP - -defprio_install() -{ - local dev=$1; shift - local prio=$1; shift - local app="app=$prio,1,0" - - lldptool -T -i $dev -V APP $app >/dev/null - lldpad_app_wait_set $dev - APP[$prio]=$app -} - -defprio_uninstall() -{ - local dev=$1; shift - local prio=$1; shift - local app=${APP[$prio]} - - lldptool -T -i $dev -V APP -d $app >/dev/null - lldpad_app_wait_del - unset APP[$prio] -} - -defprio_flush() -{ - local dev=$1; shift - local prio - - if ((${#APP[@]})); then - lldptool -T -i $dev -V APP -d ${APP[@]} >/dev/null - fi - lldpad_app_wait_del - APP=() -} - h1_create() { simple_if_init $h1 192.0.2.1/28 @@ -83,7 +47,7 @@ switch_create() switch_destroy() { - defprio_flush $swp1 + dcb app flush dev $swp1 default-prio ip addr del dev $swp1 192.0.2.2/28 ip link set dev $swp1 down } @@ -124,7 +88,7 @@ __test_defprio() RET=0 - defprio_install $swp1 $prio_install + dcb app add dev $swp1 default-prio $prio_install local t0=$(ethtool_stats_get $swp1 rx_frames_prio_$prio_observe) mausezahn -q $h1 -d 100m -c 10 -t arp reply @@ -134,7 +98,7 @@ __test_defprio() check_err $? "Default priority $prio_install/$prio_observe: Expected to capture 10 packets, got $((t1 - t0))." log_test "Default priority $prio_install/$prio_observe" - defprio_uninstall $swp1 $prio_install + dcb app del dev $swp1 default-prio $prio_install } test_defprio() @@ -145,7 +109,7 @@ test_defprio() __test_defprio $prio $prio done - defprio_install $swp1 3 + dcb app add dev $swp1 default-prio 3 __test_defprio 0 3 __test_defprio 1 3 __test_defprio 2 3 @@ -153,7 +117,7 @@ test_defprio() __test_defprio 5 5 __test_defprio 6 6 __test_defprio 7 7 - defprio_uninstall $swp1 3 + dcb app del dev $swp1 default-prio 3 } trap cleanup EXIT diff --git a/tools/testing/selftests/drivers/net/mlxsw/qos_dscp_bridge.sh b/tools/testing/selftests/drivers/net/mlxsw/qos_dscp_bridge.sh index 28a570006d4d..87c41f5727c9 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/qos_dscp_bridge.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/qos_dscp_bridge.sh @@ -20,7 +20,7 @@ # | SW | | | # | +-|----------------------------------------------------------------|-+ | # | | + $swp1 BR $swp2 + | | -# | | APP=0,5,10 .. 7,5,17 APP=0,5,20 .. 7,5,27 | | +# | | dcb dscp-prio 10:0...17:7 dcb dscp-prio 20:0...27:7 | | # | +--------------------------------------------------------------------+ | # +---------------------------------------------------------------------------+ @@ -62,16 +62,6 @@ h2_destroy() simple_if_fini $h2 192.0.2.2/28 } -dscp_map() -{ - local base=$1; shift - local prio - - for prio in {0..7}; do - echo app=$prio,5,$((base + prio)) - done -} - switch_create() { ip link add name br1 type bridge vlan_filtering 1 @@ -81,17 +71,14 @@ switch_create() ip link set dev $swp2 master br1 ip link set dev $swp2 up - lldptool -T -i $swp1 -V APP $(dscp_map 10) >/dev/null - lldptool -T -i $swp2 -V APP $(dscp_map 20) >/dev/null - lldpad_app_wait_set $swp1 - lldpad_app_wait_set $swp2 + dcb app add dev $swp1 dscp-prio 10:0 11:1 12:2 13:3 14:4 15:5 16:6 17:7 + dcb app add dev $swp2 dscp-prio 20:0 21:1 22:2 23:3 24:4 25:5 26:6 27:7 } switch_destroy() { - lldptool -T -i $swp2 -V APP -d $(dscp_map 20) >/dev/null - lldptool -T -i $swp1 -V APP -d $(dscp_map 10) >/dev/null - lldpad_app_wait_del + dcb app del dev $swp2 dscp-prio 20:0 21:1 22:2 23:3 24:4 25:5 26:6 27:7 + dcb app del dev $swp1 dscp-prio 10:0 11:1 12:2 13:3 14:4 15:5 16:6 17:7 ip link set dev $swp2 down ip link set dev $swp2 nomaster diff --git a/tools/testing/selftests/drivers/net/mlxsw/qos_dscp_router.sh b/tools/testing/selftests/drivers/net/mlxsw/qos_dscp_router.sh index 4cb2aa65278a..f6c23f84423e 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/qos_dscp_router.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/qos_dscp_router.sh @@ -94,16 +94,6 @@ h2_destroy() simple_if_fini $h2 192.0.2.18/28 } -dscp_map() -{ - local base=$1; shift - local prio - - for prio in {0..7}; do - echo app=$prio,5,$((base + prio)) - done -} - switch_create() { simple_if_init $swp1 192.0.2.2/28 @@ -112,17 +102,14 @@ switch_create() tc qdisc add dev $swp1 clsact tc qdisc add dev $swp2 clsact - lldptool -T -i $swp1 -V APP $(dscp_map 0) >/dev/null - lldptool -T -i $swp2 -V APP $(dscp_map 0) >/dev/null - lldpad_app_wait_set $swp1 - lldpad_app_wait_set $swp2 + dcb app add dev $swp1 dscp-prio 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7 + dcb app add dev $swp2 dscp-prio 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7 } switch_destroy() { - lldptool -T -i $swp2 -V APP -d $(dscp_map 0) >/dev/null - lldptool -T -i $swp1 -V APP -d $(dscp_map 0) >/dev/null - lldpad_app_wait_del + dcb app del dev $swp2 dscp-prio 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7 + dcb app del dev $swp1 dscp-prio 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7 tc qdisc del dev $swp2 clsact tc qdisc del dev $swp1 clsact @@ -265,13 +252,11 @@ test_dscp_leftover() { echo "Test that last removed DSCP rule is deconfigured correctly" - lldptool -T -i $swp2 -V APP -d $(dscp_map 0) >/dev/null - lldpad_app_wait_del + dcb app del dev $swp2 dscp-prio 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7 __test_update 0 zero - lldptool -T -i $swp2 -V APP $(dscp_map 0) >/dev/null - lldpad_app_wait_set $swp2 + dcb app add dev $swp2 dscp-prio 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7 } trap cleanup EXIT diff --git a/tools/testing/selftests/drivers/net/netdevsim/devlink.sh b/tools/testing/selftests/drivers/net/netdevsim/devlink.sh index a08c02abde12..7f7d20f22207 100755 --- a/tools/testing/selftests/drivers/net/netdevsim/devlink.sh +++ b/tools/testing/selftests/drivers/net/netdevsim/devlink.sh @@ -17,6 +17,18 @@ SYSFS_NET_DIR=/sys/bus/netdevsim/devices/$DEV_NAME/net/ DEBUGFS_DIR=/sys/kernel/debug/netdevsim/$DEV_NAME/ DL_HANDLE=netdevsim/$DEV_NAME +wait_for_devlink() +{ + "$@" | grep -q $DL_HANDLE +} + +devlink_wait() +{ + local timeout=$1 + + busywait "$timeout" wait_for_devlink devlink dev +} + fw_flash_test() { RET=0 @@ -256,6 +268,9 @@ netns_reload_test() ip netns del testns2 ip netns del testns1 + # Wait until netns async cleanup is done. + devlink_wait 2000 + log_test "netns reload test" } @@ -348,6 +363,9 @@ resource_test() ip netns del testns2 ip netns del testns1 + # Wait until netns async cleanup is done. + devlink_wait 2000 + log_test "resource test" } |