| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
kvm_riscv_vcpu_set_reg_isa_ext function
In the function kvm_riscv_vcpu_set_reg_isa_ext, the original code
used incorrect reg_subtype labels KVM_REG_RISCV_SBI_MULTI_EN/DIS.
These have been corrected to KVM_REG_RISCV_ISA_MULTI_EN/DIS respectively.
Although they are numerically equivalent, the actual processing
will not result in errors, but it may lead to ambiguous code semantics.
Fixes: 613029442a4b ("RISC-V: KVM: Extend ONE_REG to enable/disable multiple ISA extensions")
Signed-off-by: Quan Zhou <zhouquan@iscas.ac.cn>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/ff1c6771a67d660db94372ac9aaa40f51e5e0090.1716429371.git.zhouquan@iscas.ac.cn
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
When the maximum hart number within groups is 1, hart-index-bit is set to
0. Consequently, there is no need to restore the hart ID from IMSIC
addresses and hart-index-bit settings. Currently, QEMU and kvmtool do not
pass correct hart-index-bit values when the maximum hart number is a
power of 2, thereby avoiding this issue. Corresponding patches for QEMU
and kvmtool will also be dispatched.
Fixes: 89d01306e34d ("RISC-V: KVM: Implement device interface for AIA irqchip")
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20240415064905.25184-1-yongxuan.wang@sifive.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Avoid 'constexpr', which is a keyword in C23
- Allow 'dtbs_check' and 'dt_compatible_check' run independently of
'dt_binding_check'
- Fix weak references to avoid GOT entries in position-independent code
generation
- Convert the last use of 'optional' property in arch/sh/Kconfig
- Remove support for the 'optional' property in Kconfig
- Remove support for Clang's ThinLTO caching, which does not work with
the .incbin directive
- Change the semantics of $(src) so it always points to the source
directory, which fixes Makefile inconsistencies between upstream and
downstream
- Fix 'make tar-pkg' for RISC-V to produce a consistent package
- Provide reasonable default coverage for objtool, sanitizers, and
profilers
- Remove redundant OBJECT_FILES_NON_STANDARD, KASAN_SANITIZE, etc.
- Remove the last use of tristate choice in drivers/rapidio/Kconfig
- Various cleanups and fixes in Kconfig
* tag 'kbuild-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (46 commits)
kconfig: use sym_get_choice_menu() in sym_check_prop()
rapidio: remove choice for enumeration
kconfig: lxdialog: remove initialization with A_NORMAL
kconfig: m/nconf: merge two item_add_str() calls
kconfig: m/nconf: remove dead code to display value of bool choice
kconfig: m/nconf: remove dead code to display children of choice members
kconfig: gconf: show checkbox for choice correctly
kbuild: use GCOV_PROFILE and KCSAN_SANITIZE in scripts/Makefile.modfinal
Makefile: remove redundant tool coverage variables
kbuild: provide reasonable defaults for tool coverage
modules: Drop the .export_symbol section from the final modules
kconfig: use menu_list_for_each_sym() in sym_check_choice_deps()
kconfig: use sym_get_choice_menu() in conf_write_defconfig()
kconfig: add sym_get_choice_menu() helper
kconfig: turn defaults and additional prompt for choice members into error
kconfig: turn missing prompt for choice members into error
kconfig: turn conf_choice() into void function
kconfig: use linked list in sym_set_changed()
kconfig: gconf: use MENU_CHANGED instead of SYMBOL_CHANGED
kconfig: gconf: remove debug code
...
|
|
Kbuild conventionally uses $(obj)/ for generated files, and $(src)/ for
checked-in source files. It is merely a convention without any functional
difference. In fact, $(obj) and $(src) are exactly the same, as defined
in scripts/Makefile.build:
src := $(obj)
When the kernel is built in a separate output directory, $(src) does
not accurately reflect the source directory location. While Kbuild
resolves this discrepancy by specifying VPATH=$(srctree) to search for
source files, it does not cover all cases. For example, when adding a
header search path for local headers, -I$(srctree)/$(src) is typically
passed to the compiler.
This introduces inconsistency between upstream and downstream Makefiles
because $(src) is used instead of $(srctree)/$(src) for the latter.
To address this inconsistency, this commit changes the semantics of
$(src) so that it always points to the directory in the source tree.
Going forward, the variables used in Makefiles will have the following
meanings:
$(obj) - directory in the object tree
$(src) - directory in the source tree (changed by this commit)
$(objtree) - the top of the kernel object tree
$(srctree) - the top of the kernel source tree
Consequently, $(srctree)/$(src) in upstream Makefiles need to be replaced
with $(src).
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
|
|
KVM/riscv changes for 6.10
- Support guest breakpoints using ebreak
- Introduce per-VCPU mp_state_lock and reset_cntx_lock
- Virtualize SBI PMU snapshot and counter overflow interrupts
- New selftests for SBI PMU and Guest ebreak
|
|
Rename the function to indicate that it is meant for firmware
counter read. While at it, add a range sanity check for it as
well.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240420151741.962500-17-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
The SBI v2.0 introduced a fw_read_hi function to read 64 bit firmware
counters for RV32 based systems.
Add infrastructure to support that.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-16-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
KVM enables perf for guest via counter virtualization. However, the
sampling can not be supported as there is no mechanism to enabled
trap/emulate scountovf in ISA yet. Rely on the SBI PMU snapshot
to provide the counter overflow data via the shared memory.
In case of sampling event, the host first sets the guest's LCOFI
interrupt and injects to the guest via irq filtering mechanism defined
in AIA specification. Thus, ssaia must be enabled in the host in order
to use perf sampling in the guest. No other AIA dependency w.r.t kernel
is required.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-15-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
PMU Snapshot function allows to minimize the number of traps when the
guest access configures/access the hpmcounters. If the snapshot feature
is enabled, the hypervisor updates the shared memory with counter
data and state of overflown counters. The guest can just read the
shared memory instead of trap & emulate done by the hypervisor.
This patch doesn't implement the counter overflow yet.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-14-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Currently, we return a linux error code if creating a perf event failed
in kvm. That shouldn't be necessary as guest can continue to operate
without perf profiling or profiling with firmware counters.
Return appropriate SBI error code to indicate that PMU configuration
failed. An error message in kvm already describes the reason for failure.
Fixes: 0cb74b65d2e5 ("RISC-V: KVM: Implement perf support without sampling")
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-13-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
The virtual counter value is updated during pmu_ctr_read. There is no need
to update it in reset case. Otherwise, it will be counted twice which is
incorrect.
Fixes: 0cb74b65d2e5 ("RISC-V: KVM: Implement perf support without sampling")
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-12-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
The initial sample period value when counter value is not assigned
should be set to maximum value supported by the counter width.
Otherwise, it may result in spurious interrupts.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240420151741.962500-11-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
SBI_STA_SHMEM_DISABLE is a macro to invoke disable shared memory
commands. As this can be invoked from other SBI extension context
as well, rename it to more generic name as SBI_SHMEM_DISABLE.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-7-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Originally, the use of kvm->lock in SBI_EXT_HSM_HART_START also avoids
the simultaneous updates to the reset context of target VCPU. Since this
lock has been replace with vcpu->mp_state_lock, and this new lock also
protects the vcpu->mp_state. We have to add a separate lock for
vcpu->reset_cntx.
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240417074528.16506-3-yongxuan.wang@sifive.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Documentation/virt/kvm/locking.rst advises that kvm->lock should be
acquired outside vcpu->mutex and kvm->srcu. However, when KVM/RISC-V
handling SBI_EXT_HSM_HART_START, the lock ordering is vcpu->mutex,
kvm->srcu then kvm->lock.
Although the lockdep checking no longer complains about this after commit
f0f44752f5f6 ("rcu: Annotate SRCU's update-side lockdep dependencies"),
it's necessary to replace kvm->lock with a new dedicated lock to ensure
only one hart can execute the SBI_EXT_HSM_HART_START call for the target
hart simultaneously.
Additionally, this patch also rename "power_off" to "mp_state" with two
possible values. The vcpu->mp_state_lock also protects the access of
vcpu->mp_state.
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240417074528.16506-2-yongxuan.wang@sifive.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
The .change_pte() MMU notifier callback was intended as an
optimization. The original point of it was that KSM could tell KVM to flip
its secondary PTE to a new location without having to first zap it. At
the time there was also an .invalidate_page() callback; both of them were
*not* bracketed by calls to mmu_notifier_invalidate_range_{start,end}(),
and .invalidate_page() also doubled as a fallback implementation of
.change_pte().
Later on, however, both callbacks were changed to occur within an
invalidate_range_start/end() block.
In the case of .change_pte(), commit 6bdb913f0a70 ("mm: wrap calls to
set_pte_at_notify with invalidate_range_start and invalidate_range_end",
2012-10-09) did so to remove the fallback from .invalidate_page() to
.change_pte() and allow sleepable .invalidate_page() hooks.
This however made KVM's usage of the .change_pte() callback completely
moot, because KVM unmaps the sPTEs during .invalidate_range_start()
and therefore .change_pte() has no hope of finding a sPTE to change.
Drop the generic KVM code that dispatches to kvm_set_spte_gfn(), as
well as all the architecture specific implementations.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Anup Patel <anup@brainfault.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-ID: <20240405115815.3226315-2-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Exit to userspace for breakpoint traps. Set the exit_reason as
KVM_EXIT_DEBUG before exit.
Signed-off-by: Chao Du <duchao@eswincomputing.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240402062628.5425-3-duchao@eswincomputing.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
kvm_vm_ioctl_check_extension(): Return 1 if KVM_CAP_SET_GUEST_DEBUG is
been checked.
kvm_arch_vcpu_ioctl_set_guest_debug(): Update the guest_debug flags
from userspace accordingly. Route the breakpoint exceptions to HS mode
if the VCPU is being debugged by userspace, by clearing the
corresponding bit in hedeleg.
Initialize the hedeleg configuration in kvm_riscv_vcpu_setup_config().
Write the actual CSR in kvm_arch_vcpu_load().
Signed-off-by: Chao Du <duchao@eswincomputing.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240402062628.5425-2-duchao@eswincomputing.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
The reads to APLIC in_clrip[x] registers returns rectified input values
of the interrupt sources.
A rectified input value of an interrupt source is defined by the section
"4.5.2 Source configurations (sourcecfg[1]–sourcecfg[1023])" of the
RISC-V AIA specification as:
rectified input value = (incoming wire value) XOR (source is inverted)
Update the riscv_aplic_input() implementation to match the above.
Cc: stable@vger.kernel.org
Fixes: 74967aa208e2 ("RISC-V: KVM: Add in-kernel emulation of AIA APLIC")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240321085041.1955293-3-apatel@ventanamicro.com
|
|
The writes to setipnum_le/be register for APLIC in MSI-mode have special
consideration for level-triggered interrupts as-per the section "4.9.2
Special consideration for level-sensitive interrupt sources" of the RISC-V
AIA specification.
Particularly, the below text from the RISC-V AIA specification defines
the behaviour of writes to setipnum_le/be register for level-triggered
interrupts:
"A second option is for the interrupt service routine to write the
APLIC’s source identity number for the interrupt to the domain’s
setipnum register just before exiting. This will cause the interrupt’s
pending bit to be set to one again if the source is still asserting
an interrupt, but not if the source is not asserting an interrupt."
Fix setipnum_le/be write emulation for in-kernel APLIC by implementing
the above behaviour in aplic_write_pending() function.
Cc: stable@vger.kernel.org
Fixes: 74967aa208e2 ("RISC-V: KVM: Add in-kernel emulation of AIA APLIC")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240321085041.1955293-2-apatel@ventanamicro.com
|
|
There is a statement with two semicolons. Remove the second one, it
is redundant.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240315092914.2431214-1-colin.i.king@gmail.com
|
|
KVM/riscv changes for 6.9
- Exception and interrupt handling for selftests
- Sstc (aka arch_timer) selftest
- Forward seed CSR access to KVM userspace
- Ztso extension support for Guest/VM
- Zacas extension support for Guest/VM
|
|
https://github.com/kvm-x86/linux into HEAD
KVM GUEST_MEMFD fixes for 6.8:
- Make KVM_MEM_GUEST_MEMFD mutually exclusive with KVM_MEM_READONLY to
avoid creating ABI that KVM can't sanely support.
- Update documentation for KVM_SW_PROTECTED_VM to make it abundantly
clear that such VMs are purely a development and testing vehicle, and
come with zero guarantees.
- Limit KVM_SW_PROTECTED_VM guests to the TDP MMU, as the long term plan
is to support confidential VMs with deterministic private memory (SNP
and TDX) only in the TDP MMU.
- Fix a bug in a GUEST_MEMFD negative test that resulted in false passes
when verifying that KVM_MEM_GUEST_MEMFD memslots can't be dirty logged.
|
|
Extend the KVM ISA extension ONE_REG interface to allow KVM user space
to detect and enable Zacas extension for Guest/VM.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Extend the KVM ISA extension ONE_REG interface to allow KVM user space
to detect and enable Ztso extension for Guest/VM.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
The SEED CSR access from VS/VU mode (guest) will always trap to
HS-mode (KVM) when Zkr extension is available to the Guest/VM.
Forward this CSR access to KVM user space so that it can be
emulated based on the method chosen by VMM.
Fixes: f370b4e668f0 ("RISC-V: KVM: Allow scalar crypto extensions for Guest/VM")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
HEAD
KVM/riscv fixes for 6.8, take #1
- Fix steal-time related sparse warnings
|
|
__le32 and __le64 types should be used with le32_to_cpu() and
le64_to_cpu() and __user is needed for pointers referencing
guest memory, as sparse helpfully points out.
Fixes: e9f12b5fff8a ("RISC-V: KVM: Implement SBI STA extension")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202401020142.lwFEDK5v-lkp@intel.com/
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
KVM uses __KVM_HAVE_* symbols in the architecture-dependent uapi/asm/kvm.h to mask
unused definitions in include/uapi/linux/kvm.h. __KVM_HAVE_READONLY_MEM however
was nothing but a misguided attempt to define KVM_CAP_READONLY_MEM only on
architectures where KVM_CHECK_EXTENSION(KVM_CAP_READONLY_MEM) could possibly
return nonzero. This however does not make sense, and it prevented userspace
from supporting this architecture-independent feature without recompilation.
Therefore, these days __KVM_HAVE_READONLY_MEM does not mask anything and
is only used in virt/kvm/kvm_main.c. Userspace does not need to test it
and there should be no need for it to exist. Remove it and replace it
with a Kconfig symbol within Linux source code.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
We extend the KVM ISA extension ONE_REG interface to allow KVM
user space to detect and enable Zfa extension for Guest/VM.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
We extend the KVM ISA extension ONE_REG interface to allow KVM
user space to detect and enable Zvfh[min] extensions for Guest/VM.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
We extend the KVM ISA extension ONE_REG interface to allow KVM
user space to detect and enable Zihintntl extension for Guest/VM.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
We extend the KVM ISA extension ONE_REG interface to allow KVM
user space to detect and enable Zfh[min] extensions for Guest/VM.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
We extend the KVM ISA extension ONE_REG interface to allow KVM
user space to detect and enable vector crypto extensions for
Guest/VM. This includes extensions Zvbb, Zvbc, Zvkb, Zvkg,
Zvkned, Zvknha, Zvknhb, Zvksed, Zvksh, and Zvkt.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
We extend the KVM ISA extension ONE_REG interface to allow KVM
user space to detect and enable scalar crypto extensions for
Guest/VM. This includes extensions Zbkb, Zbkc, Zbkx, Zknd, Zkne,
Zknh, Zkr, Zksed, Zksh, and Zkt.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
We extend the KVM ISA extension ONE_REG interface to allow KVM
user space to detect and enable Zbc extension for Guest/VM.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Pull kvm updates from Paolo Bonzini:
"Generic:
- Use memdup_array_user() to harden against overflow.
- Unconditionally advertise KVM_CAP_DEVICE_CTRL for all
architectures.
- Clean up Kconfigs that all KVM architectures were selecting
- New functionality around "guest_memfd", a new userspace API that
creates an anonymous file and returns a file descriptor that refers
to it. guest_memfd files are bound to their owning virtual machine,
cannot be mapped, read, or written by userspace, and cannot be
resized. guest_memfd files do however support PUNCH_HOLE, which can
be used to switch a memory area between guest_memfd and regular
anonymous memory.
- New ioctl KVM_SET_MEMORY_ATTRIBUTES allowing userspace to specify
per-page attributes for a given page of guest memory; right now the
only attribute is whether the guest expects to access memory via
guest_memfd or not, which in Confidential SVMs backed by SEV-SNP,
TDX or ARM64 pKVM is checked by firmware or hypervisor that
guarantees confidentiality (AMD PSP, Intel TDX module, or EL2 in
the case of pKVM).
x86:
- Support for "software-protected VMs" that can use the new
guest_memfd and page attributes infrastructure. This is mostly
useful for testing, since there is no pKVM-like infrastructure to
provide a meaningfully reduced TCB.
- Fix a relatively benign off-by-one error when splitting huge pages
during CLEAR_DIRTY_LOG.
- Fix a bug where KVM could incorrectly test-and-clear dirty bits in
non-leaf TDP MMU SPTEs if a racing thread replaces a huge SPTE with
a non-huge SPTE.
- Use more generic lockdep assertions in paths that don't actually
care about whether the caller is a reader or a writer.
- let Xen guests opt out of having PV clock reported as "based on a
stable TSC", because some of them don't expect the "TSC stable" bit
(added to the pvclock ABI by KVM, but never set by Xen) to be set.
- Revert a bogus, made-up nested SVM consistency check for
TLB_CONTROL.
- Advertise flush-by-ASID support for nSVM unconditionally, as KVM
always flushes on nested transitions, i.e. always satisfies flush
requests. This allows running bleeding edge versions of VMware
Workstation on top of KVM.
- Sanity check that the CPU supports flush-by-ASID when enabling SEV
support.
- On AMD machines with vNMI, always rely on hardware instead of
intercepting IRET in some cases to detect unmasking of NMIs
- Support for virtualizing Linear Address Masking (LAM)
- Fix a variety of vPMU bugs where KVM fail to stop/reset counters
and other state prior to refreshing the vPMU model.
- Fix a double-overflow PMU bug by tracking emulated counter events
using a dedicated field instead of snapshotting the "previous"
counter. If the hardware PMC count triggers overflow that is
recognized in the same VM-Exit that KVM manually bumps an event
count, KVM would pend PMIs for both the hardware-triggered overflow
and for KVM-triggered overflow.
- Turn off KVM_WERROR by default for all configs so that it's not
inadvertantly enabled by non-KVM developers, which can be
problematic for subsystems that require no regressions for W=1
builds.
- Advertise all of the host-supported CPUID bits that enumerate
IA32_SPEC_CTRL "features".
- Don't force a masterclock update when a vCPU synchronizes to the
current TSC generation, as updating the masterclock can cause
kvmclock's time to "jump" unexpectedly, e.g. when userspace
hotplugs a pre-created vCPU.
- Use RIP-relative address to read kvm_rebooting in the VM-Enter
fault paths, partly as a super minor optimization, but mostly to
make KVM play nice with position independent executable builds.
- Guard KVM-on-HyperV's range-based TLB flush hooks with an #ifdef on
CONFIG_HYPERV as a minor optimization, and to self-document the
code.
- Add CONFIG_KVM_HYPERV to allow disabling KVM support for HyperV
"emulation" at build time.
ARM64:
- LPA2 support, adding 52bit IPA/PA capability for 4kB and 16kB base
granule sizes. Branch shared with the arm64 tree.
- Large Fine-Grained Trap rework, bringing some sanity to the
feature, although there is more to come. This comes with a prefix
branch shared with the arm64 tree.
- Some additional Nested Virtualization groundwork, mostly
introducing the NV2 VNCR support and retargetting the NV support to
that version of the architecture.
- A small set of vgic fixes and associated cleanups.
Loongarch:
- Optimization for memslot hugepage checking
- Cleanup and fix some HW/SW timer issues
- Add LSX/LASX (128bit/256bit SIMD) support
RISC-V:
- KVM_GET_REG_LIST improvement for vector registers
- Generate ISA extension reg_list using macros in get-reg-list
selftest
- Support for reporting steal time along with selftest
s390:
- Bugfixes
Selftests:
- Fix an annoying goof where the NX hugepage test prints out garbage
instead of the magic token needed to run the test.
- Fix build errors when a header is delete/moved due to a missing
flag in the Makefile.
- Detect if KVM bugged/killed a selftest's VM and print out a helpful
message instead of complaining that a random ioctl() failed.
- Annotate the guest printf/assert helpers with __printf(), and fix
the various bugs that were lurking due to lack of said annotation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (185 commits)
x86/kvm: Do not try to disable kvmclock if it was not enabled
KVM: x86: add missing "depends on KVM"
KVM: fix direction of dependency on MMU notifiers
KVM: introduce CONFIG_KVM_COMMON
KVM: arm64: Add missing memory barriers when switching to pKVM's hyp pgd
KVM: arm64: vgic-its: Avoid potential UAF in LPI translation cache
RISC-V: KVM: selftests: Add get-reg-list test for STA registers
RISC-V: KVM: selftests: Add steal_time test support
RISC-V: KVM: selftests: Add guest_sbi_probe_extension
RISC-V: KVM: selftests: Move sbi_ecall to processor.c
RISC-V: KVM: Implement SBI STA extension
RISC-V: KVM: Add support for SBI STA registers
RISC-V: KVM: Add support for SBI extension registers
RISC-V: KVM: Add SBI STA info to vcpu_arch
RISC-V: KVM: Add steal-update vcpu request
RISC-V: KVM: Add SBI STA extension skeleton
RISC-V: paravirt: Implement steal-time support
RISC-V: Add SBI STA extension definitions
RISC-V: paravirt: Add skeleton for pv-time support
RISC-V: KVM: Fix indentation in kvm_riscv_vcpu_set_reg_csr()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for many new extensions in hwprobe, along with a handful of
cleanups
- Various cleanups to our page table handling code, so we alwayse use
{READ,WRITE}_ONCE
- Support for the which-cpus flavor of hwprobe
- Support for XIP kernels has been resurrected
* tag 'riscv-for-linus-6.8-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (52 commits)
riscv: hwprobe: export Zicond extension
riscv: hwprobe: export Zacas ISA extension
riscv: add ISA extension parsing for Zacas
dt-bindings: riscv: add Zacas ISA extension description
riscv: hwprobe: export Ztso ISA extension
riscv: add ISA extension parsing for Ztso
use linux/export.h rather than asm-generic/export.h
riscv: Remove SHADOW_OVERFLOW_STACK_SIZE macro
riscv; fix __user annotation in save_v_state()
riscv: fix __user annotation in traps_misaligned.c
riscv: Select ARCH_WANTS_NO_INSTR
riscv: Remove obsolete rv32_defconfig file
riscv: Allow disabling of BUILTIN_DTB for XIP
riscv: Fixed wrong register in XIP_FIXUP_FLASH_OFFSET macro
riscv: Make XIP bootable again
riscv: Fix set_direct_map_default_noflush() to reset _PAGE_EXEC
riscv: Fix module_alloc() that did not reset the linear mapping permissions
riscv: Fix wrong usage of lm_alias() when splitting a huge linear mapping
riscv: Check if the code to patch lies in the exit section
riscv: Use the same CPU operations for all CPUs
...
|
|
Common KVM changes for 6.8:
- Use memdup_array_user() to harden against overflow.
- Unconditionally advertise KVM_CAP_DEVICE_CTRL for all architectures.
|
|
CONFIG_HAVE_KVM is currently used by some architectures to either
enabled the KVM config proper, or to enable host-side code that is
not part of the KVM module. However, CONFIG_KVM's "select" statement
in virt/kvm/Kconfig corresponds to a third meaning, namely to
enable common Kconfigs required by all architectures that support
KVM.
These three meanings can be replaced respectively by an
architecture-specific Kconfig, by IS_ENABLED(CONFIG_KVM), or by
a new Kconfig symbol that is in turn selected by the
architecture-specific "config KVM".
Start by introducing such a new Kconfig symbol, CONFIG_KVM_COMMON.
Unlike CONFIG_HAVE_KVM, it is selected by CONFIG_KVM, not by
architecture code, and it brings in all dependencies of common
KVM code. In particular, INTERVAL_TREE was missing in loongarch
and riscv, so that is another thing that is fixed.
Fixes: 8132d887a702 ("KVM: remove CONFIG_HAVE_KVM_EVENTFD", 2023-12-08)
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Closes: https://lore.kernel.org/all/44907c6b-c5bd-4e4a-a921-e4d3825539d8@infradead.org/
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
KVM/riscv changes for 6.8 part #1
- KVM_GET_REG_LIST improvement for vector registers
- Generate ISA extension reg_list using macros in get-reg-list selftest
- Steal time account support along with selftest
|
|
Add a select SCHED_INFO to the KVM config in order to get run_delay
info. Then implement SBI STA's set-steal-time-shmem function and
kvm_riscv_vcpu_record_steal_time() to provide the steal-time info
to guests.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
KVM userspace needs to be able to save and restore the steal-time
shared memory address. Provide the address through the get/set-one-reg
interface with two ulong-sized SBI STA extension registers (lo and hi).
64-bit KVM userspace must not set the hi register to anything other
than zero and is allowed to completely neglect saving/restoring it.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Some SBI extensions have state that needs to be saved / restored
when migrating the VM. Provide a get/set-one-reg register type
for SBI extension registers. Each SBI extension that uses this type
will have its own subtype. There are currently no subtypes defined.
The next patch introduces the first one.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
KVM's implementation of SBI STA needs to track the address of each
VCPU's steal-time shared memory region as well as the amount of
stolen time. Add a structure to vcpu_arch to contain this state
and make sure that the address is always set to INVALID_GPA on
vcpu reset. And, of course, ensure KVM won't try to update steal-
time when the shared memory address is invalid.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Add a new vcpu request to inform a vcpu that it should record its
steal-time information. The request is made each time it has been
detected that the vcpu task was not assigned a cpu for some time,
which is easy to do by making the request from vcpu-load. The record
function is just a stub for now and will be filled in with the rest
of the steal-time support functions in following patches.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Add the files and functions needed to support the SBI STA
(steal-time accounting) extension. In the next patches we'll
complete the functions to fully enable SBI STA support.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
The indentation of "break" in kvm_riscv_vcpu_set_reg_csr() is
inconsistent hence let us fix it.
Fixes: c04913f2b54e ("RISCV: KVM: Add sstateen0 to ONE_REG")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312190719.kBuYl6oJ-lkp@intel.com/
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Add all vector registers and CSRs (vstart, vl, vtype, vcsr, vlenb) in
get-reg-list.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Userspace requires 'vlenb' to be able to encode it in reg ID. Otherwise
it is not possible to retrieve any vector reg since we're returning
EINVAL if reg_size isn't vlenb (see kvm_riscv_vcpu_vreg_addr()).
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
Quan Zhou
Yong-Xuan Wang
Linus Torvalds
Masahiro Yamada
Paolo Bonzini
Atish Patra
Chao Du
Anup Patel
Colin Ian King
Andrew Jones
Daniel Henrique Barboza
