| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull asymmetric keys update from Jarkko Sakkinen:
"Add a self-test testing PCKS#7 signed data against ECDSA key and
couple of bug fixes for missing deps"
* tag 'asymmetric-keys-next-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
certs: Add ECDSA signature verification self-test
certs: Move RSA self-test data to separate file
KEYS: asymmetric: Add missing dependencies of FIPS_SIGNATURE_SELFTEST
KEYS: asymmetric: Add missing dependency on CRYPTO_SIG
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Complete rework of garbage collection of AF_UNIX sockets.
AF_UNIX is prone to forming reference count cycles due to fd
passing functionality. New method based on Tarjan's Strongly
Connected Components algorithm should be both faster and remove a
lot of workarounds we accumulated over the years.
- Add TCP fraglist GRO support, allowing chaining multiple TCP
packets and forwarding them together. Useful for small switches /
routers which lack basic checksum offload in some scenarios (e.g.
PPPoE).
- Support using SMP threads for handling packet backlog i.e. packet
processing from software interfaces and old drivers which don't use
NAPI. This helps move the processing out of the softirq jumble.
- Continue work of converting from rtnl lock to RCU protection.
Don't require rtnl lock when reading: IPv6 routing FIB, IPv6
address labels, netdev threaded NAPI sysfs files, bonding driver's
sysfs files, MPLS devconf, IPv4 FIB rules, netns IDs, tcp metrics,
TC Qdiscs, neighbor entries, ARP entries via ioctl(SIOCGARP), a lot
of the link information available via rtnetlink.
- Small optimizations from Eric to UDP wake up handling, memory
accounting, RPS/RFS implementation, TCP packet sizing etc.
- Allow direct page recycling in the bulk API used by XDP, for +2%
PPS.
- Support peek with an offset on TCP sockets.
- Add MPTCP APIs for querying last time packets were received/sent/acked
and whether MPTCP "upgrade" succeeded on a TCP socket.
- Add intra-node communication shortcut to improve SMC performance.
- Add IPv6 (and IPv{4,6}-over-IPv{4,6}) support to the GTP protocol
driver.
- Add HSR-SAN (RedBOX) mode of operation to the HSR protocol driver.
- Add reset reasons for tracing what caused a TCP reset to be sent.
- Introduce direction attribute for xfrm (IPSec) states. State can be
used either for input or output packet processing.
Things we sprinkled into general kernel code:
- Add bitmap_{read,write}(), bitmap_size(), expose BYTES_TO_BITS().
This required touch-ups and renaming of a few existing users.
- Add Endian-dependent __counted_by_{le,be} annotations.
- Make building selftests "quieter" by printing summaries like
"CC object.o" rather than full commands with all the arguments.
Netfilter:
- Use GFP_KERNEL to clone elements, to deal better with OOM
situations and avoid failures in the .commit step.
BPF:
- Add eBPF JIT for ARCv2 CPUs.
- Support attaching kprobe BPF programs through kprobe_multi link in
a session mode, meaning, a BPF program is attached to both function
entry and return, the entry program can decide if the return
program gets executed and the entry program can share u64 cookie
value with return program. "Session mode" is a common use-case for
tetragon and bpftrace.
- Add the ability to specify and retrieve BPF cookie for raw
tracepoint programs in order to ease migration from classic to raw
tracepoints.
- Add an internal-only BPF per-CPU instruction for resolving per-CPU
memory addresses and implement support in x86, ARM64 and RISC-V
JITs. This allows inlining functions which need to access per-CPU
state.
- Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
atomics in bpf_arena which can be JITed as a single x86
instruction. Support BPF arena on ARM64.
- Add a new bpf_wq API for deferring events and refactor
process-context bpf_timer code to keep common code where possible.
- Harden the BPF verifier's and/or/xor value tracking.
- Introduce crypto kfuncs to let BPF programs call kernel crypto
APIs.
- Support bpf_tail_call_static() helper for BPF programs with GCC 13.
- Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
program to have code sections where preemption is disabled.
Driver API:
- Skip software TC processing completely if all installed rules are
marked as HW-only, instead of checking the HW-only flag rule by
rule.
- Add support for configuring PoE (Power over Ethernet), similar to
the already existing support for PoDL (Power over Data Line)
config.
- Initial bits of a queue control API, for now allowing a single
queue to be reset without disturbing packet flow to other queues.
- Common (ethtool) statistics for hardware timestamping.
Tests and tooling:
- Remove the need to create a config file to run the net forwarding
tests so that a naive "make run_tests" can exercise them.
- Define a method of writing tests which require an external endpoint
to communicate with (to send/receive data towards the test
machine). Add a few such tests.
- Create a shared code library for writing Python tests. Expose the
YAML Netlink library from tools/ to the tests for easy Netlink
access.
- Move netfilter tests under net/, extend them, separate performance
tests from correctness tests, and iron out issues found by running
them "on every commit".
- Refactor BPF selftests to use common network helpers.
- Further work filling in YAML definitions of Netlink messages for:
nftables, team driver, bonding interfaces, vlan interfaces, VF
info, TC u32 mark, TC police action.
- Teach Python YAML Netlink to decode attribute policies.
- Extend the definition of the "indexed array" construct in the specs
to cover arrays of scalars rather than just nests.
- Add hyperlinks between definitions in generated Netlink docs.
Drivers:
- Make sure unsupported flower control flags are rejected by drivers,
and make more drivers report errors directly to the application
rather than dmesg (large number of driver changes from Asbjørn
Sloth Tønnesen).
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support multiple RSS contexts and steering traffic to them
- support XDP metadata
- make page pool allocations more NUMA aware
- Intel (100G, ice, idpf):
- extract datapath code common among Intel drivers into a library
- use fewer resources in switchdev by sharing queues with the PF
- add PFCP filter support
- add Ethernet filter support
- use a spinlock instead of HW lock in PTP clock ops
- support 5 layer Tx scheduler topology
- nVidia/Mellanox:
- 800G link modes and 100G SerDes speeds
- per-queue IRQ coalescing configuration
- Marvell Octeon:
- support offloading TC packet mark action
- Ethernet NICs consumer, embedded and virtual:
- stop lying about skb->truesize in USB Ethernet drivers, it
messes up TCP memory calculations
- Google cloud vNIC:
- support changing ring size via ethtool
- support ring reset using the queue control API
- VirtIO net:
- expose flow hash from RSS to XDP
- per-queue statistics
- add selftests
- Synopsys (stmmac):
- support controllers which require an RX clock signal from the
MII bus to perform their hardware initialization
- TI:
- icssg_prueth: support ICSSG-based Ethernet on AM65x SR1.0 devices
- icssg_prueth: add SW TX / RX Coalescing based on hrtimers
- cpsw: minimal XDP support
- Renesas (ravb):
- support describing the MDIO bus
- Realtek (r8169):
- add support for RTL8168M
- Microchip Sparx5:
- matchall and flower actions mirred and redirect
- Ethernet switches:
- nVidia/Mellanox:
- improve events processing performance
- Marvell:
- add support for MV88E6250 family internal PHYs
- Microchip:
- add DCB and DSCP mapping support for KSZ switches
- vsc73xx: convert to PHYLINK
- Realtek:
- rtl8226b/rtl8221b: add C45 instances and SerDes switching
- Many driver changes related to PHYLIB and PHYLINK deprecated API
cleanup
- Ethernet PHYs:
- Add a new driver for Airoha EN8811H 2.5 Gigabit PHY.
- micrel: lan8814: add support for PPS out and external timestamp trigger
- WiFi:
- Disable Wireless Extensions (WEXT) in all Wi-Fi 7 devices
drivers. Modern devices can only be configured using nl80211.
- mac80211/cfg80211
- handle color change per link for WiFi 7 Multi-Link Operation
- Intel (iwlwifi):
- don't support puncturing in 5 GHz
- support monitor mode on passive channels
- BZ-W device support
- P2P with HE/EHT support
- re-add support for firmware API 90
- provide channel survey information for Automatic Channel Selection
- MediaTek (mt76):
- mt7921 LED control
- mt7925 EHT radiotap support
- mt7920e PCI support
- Qualcomm (ath11k):
- P2P support for QCA6390, WCN6855 and QCA2066
- support hibernation
- ieee80211-freq-limit Device Tree property support
- Qualcomm (ath12k):
- refactoring in preparation of multi-link support
- suspend and hibernation support
- ACPI support
- debugfs support, including dfs_simulate_radar support
- RealTek:
- rtw88: RTL8723CS SDIO device support
- rtw89: RTL8922AE Wi-Fi 7 PCI device support
- rtw89: complete features of new WiFi 7 chip 8922AE including
BT-coexistence and Wake-on-WLAN
- rtw89: use BIOS ACPI settings to set TX power and channels
- rtl8xxxu: enable Management Frame Protection (MFP) support
- Bluetooth:
- support for Intel BlazarI and Filmore Peak2 (BE201)
- support for MediaTek MT7921S SDIO
- initial support for Intel PCIe BT driver
- remove HCI_AMP support"
* tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1827 commits)
selftests: netfilter: fix packetdrill conntrack testcase
net: gro: fix napi_gro_cb zeroed alignment
Bluetooth: btintel_pcie: Refactor and code cleanup
Bluetooth: btintel_pcie: Fix warning reported by sparse
Bluetooth: hci_core: Fix not handling hdev->le_num_of_adv_sets=1
Bluetooth: btintel: Fix compiler warning for multi_v7_defconfig config
Bluetooth: btintel_pcie: Fix compiler warnings
Bluetooth: btintel_pcie: Add *setup* function to download firmware
Bluetooth: btintel_pcie: Add support for PCIe transport
Bluetooth: btintel: Export few static functions
Bluetooth: HCI: Remove HCI_AMP support
Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()
Bluetooth: qca: Fix error code in qca_read_fw_build_info()
Bluetooth: hci_conn: Use __counted_by() and avoid -Wfamnae warning
Bluetooth: btintel: Add support for Filmore Peak2 (BE201)
Bluetooth: btintel: Add support for BlazarI
LE Create Connection command timeout increased to 20 secs
dt-bindings: net: bluetooth: Add MediaTek MT7921S SDIO Bluetooth
Bluetooth: compute LE flow credits based on recvbuf space
Bluetooth: hci_sync: Use cmd->num_cis instead of magic number
...
|
|
Commit c27b2d2012e1 ("crypto: testmgr - allow ecdsa-nist-p256 and -p384
in FIPS mode") enabled support for ECDSA in crypto/testmgr.c. The
PKCS#7 signature verification API builds upon the KCAPI primitives to
perform its high-level operations. Therefore, this change in testmgr.c
also allows ECDSA to be used by the PKCS#7 signature verification API
(in FIPS mode).
However, from a FIPS perspective, the PKCS#7 signature verification API
is a distinct "service" from the KCAPI primitives. This is because the
PKCS#7 API performs a "full" signature verification, which consists of
both hashing the data to be verified, and the public key operation.
On the other hand, the KCAPI primitive does not perform this hashing
step - it accepts pre-hashed data from the caller and only performs the
public key operation.
For this reason, the ECDSA self-tests in crypto/testmgr.c are not
sufficient to cover ECDSA signature verification offered by the PKCS#7
API. This is reflected by the self-test already present in this file
for RSA PKCS#1 v1.5 signature verification.
The solution is simply to add a second self-test here for ECDSA. P-256
with SHA-256 hashing was chosen as those parameters should remain
FIPS-approved for the foreseeable future, while keeping the performance
impact to a minimum. The ECDSA certificate and PKCS#7 signed data was
generated using OpenSSL. The input data is identical to the input data
for the existing RSA self-test.
Signed-off-by: Joachim Vandersmissen <git@jvdsn.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
In preparation of adding new ECDSA self-tests, the existing data for
the RSA self-tests is moved to a separate file. This file is only
compiled if the new CONFIG_FIPS_SIGNATURE_SELFTEST_RSA configuration
option is set, which ensures that the required dependencies (RSA,
SHA-256) are present. Otherwise, the kernel would panic when trying to
execute the self-test.
The introduction of this new option, rather than adding the
dependencies to the existing CONFIG_FIPS_SIGNATURE_SELFTEST option,
allows for additional self-tests to be added for different algorithms.
The kernel can then be configured to only execute the self-tests for
those algorithms that are included.
Signed-off-by: Joachim Vandersmissen <git@jvdsn.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Remove crypto stats interface
Algorithms:
- Add faster AES-XTS on modern x86_64 CPUs
- Forbid curves with order less than 224 bits in ecc (FIPS 186-5)
- Add ECDSA NIST P521
Drivers:
- Expose otp zone in atmel
- Add dh fallback for primes > 4K in qat
- Add interface for live migration in qat
- Use dma for aes requests in starfive
- Add full DMA support for stm32mpx in stm32
- Add Tegra Security Engine driver
Others:
- Introduce scope-based x509_certificate allocation"
* tag 'v6.10-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (123 commits)
crypto: atmel-sha204a - provide the otp content
crypto: atmel-sha204a - add reading from otp zone
crypto: atmel-i2c - rename read function
crypto: atmel-i2c - add missing arg description
crypto: iaa - Use kmemdup() instead of kzalloc() and memcpy()
crypto: sahara - use 'time_left' variable with wait_for_completion_timeout()
crypto: api - use 'time_left' variable with wait_for_completion_killable_timeout()
crypto: caam - i.MX8ULP donot have CAAM page0 access
crypto: caam - init-clk based on caam-page0-access
crypto: starfive - Use fallback for unaligned dma access
crypto: starfive - Do not free stack buffer
crypto: starfive - Skip unneeded fallback allocation
crypto: starfive - Skip dma setup for zeroed message
crypto: hisilicon/sec2 - fix for register offset
crypto: hisilicon/debugfs - mask the unnecessary info from the dump
crypto: qat - specify firmware files for 402xx
crypto: x86/aes-gcm - simplify GCM hash subkey derivation
crypto: x86/aes-gcm - delete unused GCM assembly code
crypto: x86/aes-xts - simplify loop in xts_crypt_slowpath()
hwrng: stm32 - repair clock handling
...
|
|
Since the signature self-test uses RSA and SHA-256, it must only be
enabled when those algorithms are enabled. Otherwise it fails and
panics the kernel on boot-up.
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202404221528.51d75177-lkp@intel.com
Fixes: 3cde3174eb91 ("certs: Add FIPS selftests")
Cc: stable@vger.kernel.org
Cc: Simo Sorce <simo@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Make ASYMMETRIC_PUBLIC_KEY_SUBTYPE select CRYPTO_SIG to avoid build
errors like the following, which were possible with
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y && CONFIG_CRYPTO_SIG=n:
ld: vmlinux.o: in function `public_key_verify_signature':
(.text+0x306280): undefined reference to `crypto_alloc_sig'
ld: (.text+0x306300): undefined reference to `crypto_sig_set_pubkey'
ld: (.text+0x306324): undefined reference to `crypto_sig_verify'
ld: (.text+0x30636c): undefined reference to `crypto_sig_set_privkey'
Fixes: 63ba4d67594a ("KEYS: asymmetric: Use new crypto interface without scatterlists")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
wait_for_completion_killable_timeout()
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_for_completion_killable_timeout() causing patterns like:
timeout = wait_for_completion_killable_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-04-29
We've added 147 non-merge commits during the last 32 day(s) which contain
a total of 158 files changed, 9400 insertions(+), 2213 deletions(-).
The main changes are:
1) Add an internal-only BPF per-CPU instruction for resolving per-CPU
memory addresses and implement support in x86 BPF JIT. This allows
inlining per-CPU array and hashmap lookups
and the bpf_get_smp_processor_id() helper, from Andrii Nakryiko.
2) Add BPF link support for sk_msg and sk_skb programs, from Yonghong Song.
3) Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
atomics in bpf_arena which can be JITed as a single x86 instruction,
from Alexei Starovoitov.
4) Add support for passing mark with bpf_fib_lookup helper,
from Anton Protopopov.
5) Add a new bpf_wq API for deferring events and refactor sleepable
bpf_timer code to keep common code where possible,
from Benjamin Tissoires.
6) Fix BPF_PROG_TEST_RUN infra with regards to bpf_dummy_struct_ops programs
to check when NULL is passed for non-NULLable parameters,
from Eduard Zingerman.
7) Harden the BPF verifier's and/or/xor value tracking,
from Harishankar Vishwanathan.
8) Introduce crypto kfuncs to make BPF programs able to utilize the kernel
crypto subsystem, from Vadim Fedorenko.
9) Various improvements to the BPF instruction set standardization doc,
from Dave Thaler.
10) Extend libbpf APIs to partially consume items from the BPF ringbuffer,
from Andrea Righi.
11) Bigger batch of BPF selftests refactoring to use common network helpers
and to drop duplicate code, from Geliang Tang.
12) Support bpf_tail_call_static() helper for BPF programs with GCC 13,
from Jose E. Marchesi.
13) Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
program to have code sections where preemption is disabled,
from Kumar Kartikeya Dwivedi.
14) Allow invoking BPF kfuncs from BPF_PROG_TYPE_SYSCALL programs,
from David Vernet.
15) Extend the BPF verifier to allow different input maps for a given
bpf_for_each_map_elem() helper call in a BPF program, from Philo Lu.
16) Add support for PROBE_MEM32 and bpf_addr_space_cast instructions
for riscv64 and arm64 JITs to enable BPF Arena, from Puranjay Mohan.
17) Shut up a false-positive KMSAN splat in interpreter mode by unpoison
the stack memory, from Martin KaFai Lau.
18) Improve xsk selftest coverage with new tests on maximum and minimum
hardware ring size configurations, from Tushar Vyavahare.
19) Various ReST man pages fixes as well as documentation and bash completion
improvements for bpftool, from Rameez Rehman & Quentin Monnet.
20) Fix libbpf with regards to dumping subsequent char arrays,
from Quentin Deslandes.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (147 commits)
bpf, docs: Clarify PC use in instruction-set.rst
bpf_helpers.h: Define bpf_tail_call_static when building with GCC
bpf, docs: Add introduction for use in the ISA Internet Draft
selftests/bpf: extend BPF_SOCK_OPS_RTT_CB test for srtt and mrtt_us
bpf: add mrtt and srtt as BPF_SOCK_OPS_RTT_CB args
selftests/bpf: dummy_st_ops should reject 0 for non-nullable params
bpf: check bpf_dummy_struct_ops program params for test runs
selftests/bpf: do not pass NULL for non-nullable params in dummy_st_ops
selftests/bpf: adjust dummy_st_ops_success to detect additional error
bpf: mark bpf_dummy_struct_ops.test_1 parameter as nullable
selftests/bpf: Add ring_buffer__consume_n test.
bpf: Add bpf_guard_preempt() convenience macro
selftests: bpf: crypto: add benchmark for crypto functions
selftests: bpf: crypto skcipher algo selftests
bpf: crypto: add skcipher to bpf crypto
bpf: make common crypto API for TC/XDP programs
bpf: update the comment for BTF_FIELDS_MAX
selftests/bpf: Fix wq test.
selftests/bpf: Use make_sockaddr in test_sock_addr
selftests/bpf: Use connect_to_addr in test_sock_addr
...
====================
Link: https://lore.kernel.org/r/20240429131657.19423-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The private key in ctx->private_key is currently initialized in reverse
byte order in ecdh_set_secret and whenever the key is needed in proper
byte order the variable priv is introduced and the bytes from
ctx->private_key are copied into priv while being byte-swapped
(ecc_swap_digits). To get rid of the unnecessary byte swapping initialize
ctx->private_key in proper byte order and clean up all functions that were
previously using priv or were called with ctx->private_key:
- ecc_gen_privkey: Directly initialize the passed ctx->private_key with
random bytes filling all the digits of the private key. Get rid of the
priv variable. This function only has ecdh_set_secret as a caller to
create NIST P192/256/384 private keys.
- crypto_ecdh_shared_secret: Called only from ecdh_compute_value with
ctx->private_key. Get rid of the priv variable and work with the passed
private_key directly.
- ecc_make_pub_key: Called only from ecdh_compute_value with
ctx->private_key. Get rid of the priv variable and work with the passed
private_key directly.
Cc: Salvatore Benedetto <salvatore.benedetto@intel.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
ecc_is_key_valid expects a key with the most significant digit in the last
entry of the digit array. Currently ecdh_set_secret passes a reversed key
to ecc_is_key_valid that then passes the rather simple test checking
whether the private key is in range [2, n-3]. For all current ecdh-
supported curves (NIST P192/256/384) the 'n' parameter is a rather large
number, therefore easily passing this test.
Throughout the ecdh and ecc codebase the variable 'priv' is used for a
private_key holding the bytes in proper byte order. Therefore, introduce
priv in ecdh_set_secret and copy the bytes from ctx->private_key into
priv in proper byte order by using ecc_swap_digits. Pass priv to
ecc_is_valid_key.
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Salvatore Benedetto <salvatore.benedetto@intel.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
I.G 9.7.B for FIPS 140-3 specifies that variables temporarily holding
cryptographic information should be zeroized once they are no longer
needed. Accomplish this by using kfree_sensitive for buffers that
previously held the private key.
Signed-off-by: Hailey Mothershead <hailmo@amazon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Implement skcipher crypto in BPF crypto framework.
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Link: https://lore.kernel.org/r/20240422225024.2847039-3-vadfed@meta.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Add a DEFINE_FREE() clause for x509_certificate structs and use it in
x509_cert_parse() and x509_key_preparse(). These are the only functions
where scope-based x509_certificate allocation currently makes sense.
A third user will be introduced with the forthcoming SPDM library
(Security Protocol and Data Model) for PCI device authentication.
Unlike most other DEFINE_FREE() clauses, this one checks for IS_ERR()
instead of NULL before calling x509_free_certificate() at end of scope.
That's because the "constructor" of x509_certificate structs,
x509_cert_parse(), returns a valid pointer or an ERR_PTR(), but never
NULL.
Comparing the Assembler output before/after has shown they are identical,
save for the fact that gcc-12 always generates two return paths when
__cleanup() is used, one for the success case and one for the error case.
In x509_cert_parse(), add a hint for the compiler that kzalloc() never
returns an ERR_PTR(). Otherwise the compiler adds a gratuitous IS_ERR()
check on return. Introduce an assume() macro for this which can be
re-used elsewhere in the kernel to provide hints for the compiler.
Suggested-by: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
Link: https://lore.kernel.org/all/20231003153937.000034ca@Huawei.com/
Link: https://lwn.net/Articles/934679/
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Enable the x509 parser to accept NIST P521 certificates and add the
OID for ansip521r1, which is the identifier for NIST P521.
Cc: David Howells <dhowells@redhat.com>
Tested-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Adjust the calculation of the maximum signature size for support of
NIST P521. While existing curves may prepend a 0 byte to their coordinates
(to make the number positive), NIST P521 will not do this since only the
first bit in the most significant byte is used.
If the encoding of the x & y coordinates requires at least 128 bytes then
an additional byte is needed for the encoding of the length. Take this into
account when calculating the maximum signature size.
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Tested-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Register NIST P521 as an akcipher and extend the testmgr with
NIST P521-specific test vectors.
Add a module alias so the module gets automatically loaded by the crypto
subsystem when the curve is needed.
Tested-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In cases where 'keylen' was referring to the size of the buffer used by
a curve's digits, it does not reflect the purpose of the variable anymore
once NIST P521 is used. What it refers to then is the size of the buffer,
which may be a few bytes larger than the size a coordinate of a key.
Therefore, rename keylen to bufsize where appropriate.
Tested-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Replace the usage of ndigits with nbits where precise space calculations
are needed, such as in ecdsa_max_size where the length of a coordinate is
determined.
Tested-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add the parameters for the NIST P521 curve and define a new curve ID
for it. Make the curve available in ecc_get_curve.
Tested-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In ecc_point_mult use the number of bits of the NIST P521 curve + 2. The
change is required specifically for NIST P521 to pass mathematical tests
on the public key.
Tested-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Implement vli_mmod_fast_521 following the description for how to calculate
the modulus for NIST P521 in the NIST publication "Recommendations for
Discrete Logarithm-Based Cryptography: Elliptic Curve Domain Parameters"
section G.1.4.
NIST p521 requires 9 64bit digits, so increase the ECC_MAX_DIGITS so that
the vli digit array provides enough elements to fit the larger integers
required by this curve.
Tested-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add the number of bits a curve has to the ecc_curve definition to be able
to derive the number of bytes a curve requires for its coordinates from it.
It also allows one to identify a curve by its particular size. Set the
number of bits on all curve definitions.
Tested-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Vitaly Chikunov <vt@altlinux.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
res.x has been calculated by ecc_point_mult_shamir, which uses
'mod curve_prime' on res.x and therefore p > res.x with 'p' being the
curve_prime. Further, it is true that for the NIST curves p > n with 'n'
being the 'curve_order' and therefore the following may be true as well:
p > res.x >= n.
If res.x >= n then res.x mod n can be calculated by iteratively sub-
tracting n from res.x until res.x < n. For NIST P192/256/384 this can be
done in a single subtraction. This can also be done in a single
subtraction for NIST P521.
The mathematical reason why a single subtraction is sufficient is due to
the values of 'p' and 'n' of the NIST curves where the following holds
true:
note: max(res.x) = p - 1
max(res.x) - n < n
p - 1 - n < n
p - 1 < 2n => holds true for the NIST curves
Tested-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In preparation for support of NIST P521, adjust the basic tests on the
length of the provided key parameters to only ensure that the length of the
x plus y coordinates parameter array is not an odd number and that each
coordinate fits into an array of 'ndigits' digits. Mathematical tests on
the key's parameters are then done in ecc_is_pubkey_valid_full rejecting
invalid keys.
The change is necessary since NIST P521 keys do not have keys with
coordinates that each require 'full' digits (= all bits in u64 used).
NIST P521 only requires 2 bytes (9 bits) in the most significant digit
unlike NIST P192/256/384 that each require multiple 'full' digits.
Tested-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
For NIST P192/256/384 the public key's x and y parameters could be copied
directly from a given array since both parameters filled 'ndigits' of
digits (a 'digit' is a u64). For support of NIST P521 the key parameters
need to have leading zeros prepended to the most significant digit since
only 2 bytes of the most significant digit are provided.
Therefore, implement ecc_digits_from_bytes to convert a byte array into an
array of digits and use this function in ecdsa_set_pub_key where an input
byte array needs to be converted into digits.
Suggested-by: Lukas Wunner <lukas@wunner.de>
Tested-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Replace hard-coded numbers with ECC_CURVE_NIST_P192/256/384_DIGITS where
possible.
Tested-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The for loop will be executed at least once, so i > 0. If the loop
is interrupted before i is incremented (e.g., when checking len for NULL),
i will not be checked.
Found by Linux Verification Center (linuxtesting.org) with Svace.
Signed-off-by: Roman Smirnov <r.smirnov@omp.ru>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
ecc_make_pub_key()
With the current state of the code, ecc_get_curve() cannot return
NULL in crypto_ecdh_shared_secret() and ecc_make_pub_key(). This is
conditioned by the fact that they are only called from ecdh_compute_value(),
which implements the kpp_alg::{generate_public_key,compute_shared_secret}()
methods. Also ecdh implements the kpp_alg::init() method, which is called
before the other methods and sets ecdh_ctx::curve_id to a valid value.
Signed-off-by: Roman Smirnov <r.smirnov@omp.ru>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The PDF is also available via https.
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
s/in//
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
private_key is overwritten with the key parameter passed in by the
caller (if present), or alternatively a newly generated private key.
However, it is possible that the caller provides a key (or the newly
generated key) which is shorter than the previous key. In that
scenario, some key material from the previous key would not be
overwritten. The easiest solution is to explicitly zeroize the entire
private_key array first.
Note that this patch slightly changes the behavior of this function:
previously, if the ecc_gen_privkey failed, the old private_key would
remain. Now, the private_key is always zeroized. This behavior is
consistent with the case where params.key is set and ecc_is_key_valid
fails.
Signed-off-by: Joachim Vandersmissen <git@jvdsn.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sentinels) which will
reduce the overall build time size of the kernel and run time memory
bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/)
Remove sentinel from crypto_sysctl_table
Signed-off-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Replace memzero_explicit() and kvfree() with kvfree_sensitive() to fix
the following Coccinelle/coccicheck warning reported by
kfree_sensitive.cocci:
WARNING opportunity for kfree_sensitive/kvfree_sensitive
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add module alias with the algorithm cra_name similar to what we have for
RSA-related and other algorithms.
The kernel attempts to modprobe asymmetric algorithms using the names
"crypto-$cra_name" and "crypto-$cra_name-all." However, since these
aliases are currently missing, the modules are not loaded. For instance,
when using the `add_key` function, the hash algorithm is typically
loaded automatically, but the asymmetric algorithm is not.
Steps to test:
1. Create certificate
openssl req -x509 -sha256 -newkey ec \
-pkeyopt "ec_paramgen_curve:secp384r1" -keyout key.pem -days 365 \
-subj '/CN=test' -nodes -outform der -out nist-p384.der
2. Optionally, trace module requests with: trace-cmd stream -e module &
3. Trigger add_key call for the cert:
# keyctl padd asymmetric "" @u < nist-p384.der
641069229
# lsmod | head -2
Module Size Used by
ecdsa_generic 16384 0
Fixes: c12d448ba939 ("crypto: ecdsa - Register NIST P384 and extend test suite")
Cc: stable@vger.kernel.org
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Vitaly Chikunov <vt@altlinux.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
FIPS 186-5 [1] was released approximately 1 year ago. The most
interesting change for ecc_gen_privkey is the removal of curves with
order < 224 bits. This is minimum is now checked in step 1. It is
unlikely that there is still any benefit in generating private keys for
curves with n < 224, as those curves provide less than 112 bits of
security strength and are therefore unsafe for any modern usage.
This patch also updates the documentation for __ecc_is_key_valid and
ecc_gen_privkey to clarify which FIPS 186-5 method is being used to
generate private keys. Previous documentation mentioned that "extra
random bits" was used. However, this did not match the code. Instead,
the code currently uses (and always has used) the "rejection sampling"
("testing candidates" in FIPS 186-4) method.
[1]: https://doi.org/10.6028/NIST.FIPS.186-5
Signed-off-by: Joachim Vandersmissen <git@jvdsn.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add module alias with the algorithm cra_name similar to what we have for
RSA-related and other algorithms.
The kernel attempts to modprobe asymmetric algorithms using the names
"crypto-$cra_name" and "crypto-$cra_name-all." However, since these
aliases are currently missing, the modules are not loaded. For instance,
when using the `add_key` function, the hash algorithm is typically
loaded automatically, but the asymmetric algorithm is not.
Steps to test:
1. Cert is generated usings ima-evm-utils test suite with
`gen-keys.sh`, example cert is provided below:
$ base64 -d >test-gost2012_512-A.cer <<EOF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=
EOF
2. Optionally, trace module requests with: trace-cmd stream -e module &
3. Trigger add_key call for the cert:
# keyctl padd asymmetric "" @u <test-gost2012_512-A.cer
939910969
# lsmod | head -3
Module Size Used by
ecrdsa_generic 16384 0
streebog_generic 28672 0
Repored-by: Paul Wolneykien <manowar@altlinux.org>
Cc: stable@vger.kernel.org
Signed-off-by: Vitaly Chikunov <vt@altlinux.org>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Remove support for the "Crypto usage statistics" feature
(CONFIG_CRYPTO_STATS). This feature does not appear to have ever been
used, and it is harmful because it significantly reduces performance and
is a large maintenance burden.
Covering each of these points in detail:
1. Feature is not being used
Since these generic crypto statistics are only readable using netlink,
it's fairly straightforward to look for programs that use them. I'm
unable to find any evidence that any such programs exist. For example,
Debian Code Search returns no hits except the kernel header and kernel
code itself and translations of the kernel header:
https://codesearch.debian.net/search?q=CRYPTOCFGA_STAT&literal=1&perpkg=1
The patch series that added this feature in 2018
(https://lore.kernel.org/linux-crypto/1537351855-16618-1-git-send-email-clabbe@baylibre.com/)
said "The goal is to have an ifconfig for crypto device." This doesn't
appear to have happened.
It's not clear that there is real demand for crypto statistics. Just
because the kernel provides other types of statistics such as I/O and
networking statistics and some people find those useful does not mean
that crypto statistics are useful too.
Further evidence that programs are not using CONFIG_CRYPTO_STATS is that
it was able to be disabled in RHEL and Fedora as a bug fix
(https://gitlab.com/redhat/centos-stream/src/kernel/centos-stream-9/-/merge_requests/2947).
Even further evidence comes from the fact that there are and have been
bugs in how the stats work, but they were never reported. For example,
before Linux v6.7 hash stats were double-counted in most cases.
There has also never been any documentation for this feature, so it
might be hard to use even if someone wanted to.
2. CONFIG_CRYPTO_STATS significantly reduces performance
Enabling CONFIG_CRYPTO_STATS significantly reduces the performance of
the crypto API, even if no program ever retrieves the statistics. This
primarily affects systems with a large number of CPUs. For example,
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2039576 reported
that Lustre client encryption performance improved from 21.7GB/s to
48.2GB/s by disabling CONFIG_CRYPTO_STATS.
It can be argued that this means that CONFIG_CRYPTO_STATS should be
optimized with per-cpu counters similar to many of the networking
counters. But no one has done this in 5+ years. This is consistent
with the fact that the feature appears to be unused, so there seems to
be little interest in improving it as opposed to just disabling it.
It can be argued that because CONFIG_CRYPTO_STATS is off by default,
performance doesn't matter. But Linux distros tend to error on the side
of enabling options. The option is enabled in Ubuntu and Arch Linux,
and until recently was enabled in RHEL and Fedora (see above). So, even
just having the option available is harmful to users.
3. CONFIG_CRYPTO_STATS is a large maintenance burden
There are over 1000 lines of code associated with CONFIG_CRYPTO_STATS,
spread among 32 files. It significantly complicates much of the
implementation of the crypto API. After the initial submission, many
fixes and refactorings have consumed effort of multiple people to keep
this feature "working". We should be spending this effort elsewhere.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
While looking at UDP receive performance, I saw sk_wake_async()
was no longer inlined.
This matters at least on AMD Zen1-4 platforms (see SRSO)
This might be because rcu_read_lock() and rcu_read_unlock()
are no longer nops in recent kernels ?
Add sk_wake_async_rcu() variant, which must be called from
contexts already holding rcu lock.
As SOCK_FASYNC is deprecated in modern days, use unlikely()
to give a hint to the compiler.
sk_wake_async_rcu() is properly inlined from
__udp_enqueue_schedule_skb() and sock_def_readable().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240328144032.1864988-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"This fixes a regression that broke iwd as well as a divide by zero in
iaa"
* tag 'v6.9-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: iaa - Fix nr_cpus < nr_iaa case
Revert "crypto: pkcs7 - remove sha1 support"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for various vector-accelerated crypto routines
- Hibernation is now enabled for portable kernel builds
- mmap_rnd_bits_max is larger on systems with larger VAs
- Support for fast GUP
- Support for membarrier-based instruction cache synchronization
- Support for the Andes hart-level interrupt controller and PMU
- Some cleanups around unaligned access speed probing and Kconfig
settings
- Support for ACPI LPI and CPPC
- Various cleanus related to barriers
- A handful of fixes
* tag 'riscv-for-linus-6.9-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (66 commits)
riscv: Fix syscall wrapper for >word-size arguments
crypto: riscv - add vector crypto accelerated AES-CBC-CTS
crypto: riscv - parallelize AES-CBC decryption
riscv: Only flush the mm icache when setting an exec pte
riscv: Use kcalloc() instead of kzalloc()
riscv/barrier: Add missing space after ','
riscv/barrier: Consolidate fence definitions
riscv/barrier: Define RISCV_FULL_BARRIER
riscv/barrier: Define __{mb,rmb,wmb}
RISC-V: defconfig: Enable CONFIG_ACPI_CPPC_CPUFREQ
cpufreq: Move CPPC configs to common Kconfig and add RISC-V
ACPI: RISC-V: Add CPPC driver
ACPI: Enable ACPI_PROCESSOR for RISC-V
ACPI: RISC-V: Add LPI driver
cpuidle: RISC-V: Move few functions to arch/riscv
riscv: Introduce set_compat_task() in asm/compat.h
riscv: Introduce is_compat_thread() into compat.h
riscv: add compile-time test into is_compat_task()
riscv: Replace direct thread flag check with is_compat_task()
riscv: Improve arch_get_mmap_end() macro
...
|
|
This reverts commit 16ab7cb5825fc3425c16ad2c6e53d827f382d7c6 because it
broke iwd. iwd uses the KEYCTL_PKEY_* UAPIs via its dependency libell,
and apparently it is relying on SHA-1 signature support. These UAPIs
are fairly obscure, and their documentation does not mention which
algorithms they support. iwd really should be using a properly
supported userspace crypto library instead. Regardless, since something
broke we have to revert the change.
It may be possible that some parts of this commit can be reinstated
without breaking iwd (e.g. probably the removal of MODULE_SIG_SHA1), but
for now this just does a full revert to get things working again.
Reported-by: Karel Balej <balejk@matfyz.cz>
Closes: https://lore.kernel.org/r/CZSHRUIJ4RKL.34T4EASV5DNJM@matfyz.cz
Cc: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Tested-by: Karel Balej <balejk@matfyz.cz>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Avoid unnecessary copying in scomp for trivial SG lists
Algorithms:
- Optimise NEON CCM implementation on ARM64
Drivers:
- Add queue stop/query debugfs support in hisilicon/qm
- Intel qat updates and cleanups"
* tag 'v6.9-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (79 commits)
Revert "crypto: remove CONFIG_CRYPTO_STATS"
crypto: scomp - remove memcpy if sg_nents is 1 and pages are lowmem
crypto: tcrypt - add ffdhe2048(dh) test
crypto: iaa - fix the missing CRYPTO_ALG_ASYNC in cra_flags
crypto: hisilicon/zip - fix the missing CRYPTO_ALG_ASYNC in cra_flags
hwrng: hisi - use dev_err_probe
MAINTAINERS: Remove T Ambarus from few mchp entries
crypto: iaa - Fix comp/decomp delay statistics
crypto: iaa - Fix async_disable descriptor leak
dt-bindings: rng: atmel,at91-trng: add sam9x7 TRNG
dt-bindings: crypto: add sam9x7 in Atmel TDES
dt-bindings: crypto: add sam9x7 in Atmel SHA
dt-bindings: crypto: add sam9x7 in Atmel AES
crypto: remove CONFIG_CRYPTO_STATS
crypto: dh - Make public key test FIPS-only
crypto: rockchip - fix to check return value
crypto: jitter - fix CRYPTO_JITTERENTROPY help text
crypto: qat - make ring to service map common for QAT GEN4
crypto: qat - fix ring to service map for dcc in 420xx
crypto: qat - fix ring to service map for dcc in 4xxx
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- Kuan-Wei Chiu has developed the well-named series "lib min_heap: Min
heap optimizations".
- Kuan-Wei Chiu has also sped up the library sorting code in the series
"lib/sort: Optimize the number of swaps and comparisons".
- Alexey Gladkov has added the ability for code running within an IPC
namespace to alter its IPC and MQ limits. The series is "Allow to
change ipc/mq sysctls inside ipc namespace".
- Geert Uytterhoeven has contributed some dhrystone maintenance work in
the series "lib: dhry: miscellaneous cleanups".
- Ryusuke Konishi continues nilfs2 maintenance work in the series
"nilfs2: eliminate kmap and kmap_atomic calls"
"nilfs2: fix kernel bug at submit_bh_wbc()"
- Nathan Chancellor has updated our build tools requirements in the
series "Bump the minimum supported version of LLVM to 13.0.1".
- Muhammad Usama Anjum continues with the selftests maintenance work in
the series "selftests/mm: Improve run_vmtests.sh".
- Oleg Nesterov has done some maintenance work against the signal code
in the series "get_signal: minor cleanups and fix".
Plus the usual shower of singleton patches in various parts of the tree.
Please see the individual changelogs for details.
* tag 'mm-nonmm-stable-2024-03-14-09-36' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (77 commits)
nilfs2: prevent kernel bug at submit_bh_wbc()
nilfs2: fix failure to detect DAT corruption in btree and direct mappings
ocfs2: enable ocfs2_listxattr for special files
ocfs2: remove SLAB_MEM_SPREAD flag usage
assoc_array: fix the return value in assoc_array_insert_mid_shortcut()
buildid: use kmap_local_page()
watchdog/core: remove sysctl handlers from public header
nilfs2: use div64_ul() instead of do_div()
mul_u64_u64_div_u64: increase precision by conditionally swapping a and b
kexec: copy only happens before uchunk goes to zero
get_signal: don't initialize ksig->info if SIGNAL_GROUP_EXIT/group_exec_task
get_signal: hide_si_addr_tag_bits: fix the usage of uninitialized ksig
get_signal: don't abuse ksig->info.si_signo and ksig->sig
const_structs.checkpatch: add device_type
Normalise "name (ad@dr)" MODULE_AUTHORs to "name <ad@dr>"
dyndbg: replace kstrdup() + strchr() with kstrdup_and_replace()
list: leverage list_is_head() for list_entry_is_head()
nilfs2: MAINTAINERS: drop unreachable project mirror site
smp: make __smp_processor_id() 0-argument macro
fat: fix uninitialized field in nostale filehandles
...
|
|
This reverts commit 2beb81fbf0c01a62515a1bcef326168494ee2bd0.
While removing CONFIG_CRYPTO_STATS is a worthy goal, this also
removed unrelated infrastructure such as crypto_comp_alg_common.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
while sg_nents is 1, which is always true for the current kernel
as the only user - zswap is this case, we might have a chance to
remove memcpy, thus improve the performance.
Though sg_nents is 1, its buffer might cross two pages. If those
pages are highmem, we have no cheap way to map them to contiguous
virtual address because kmap doesn't support more than one page
(kmap single higmem page could be still expensive for tlb) and
vmap is expensive.
So we also test and enure page is not highmem in order to safely
use page_to_virt before removing the memcpy. The good news is
that in the most majority of cases, we are lowmem, and we are
always lowmem in those modern and popular hardware.
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Tested-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Commit 7dce59819750 ("crypto: dh - implement ffdheXYZ(dh) templates")
implemented the said templates. Add ffdhe2048(dh) test as it is the
fastest one. This is a requirement for the FIPS certification.
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Remove support for the "Crypto usage statistics" feature
(CONFIG_CRYPTO_STATS). This feature does not appear to have ever been
used, and it is harmful because it significantly reduces performance and
is a large maintenance burden.
Covering each of these points in detail:
1. Feature is not being used
Since these generic crypto statistics are only readable using netlink,
it's fairly straightforward to look for programs that use them. I'm
unable to find any evidence that any such programs exist. For example,
Debian Code Search returns no hits except the kernel header and kernel
code itself and translations of the kernel header:
https://codesearch.debian.net/search?q=CRYPTOCFGA_STAT&literal=1&perpkg=1
The patch series that added this feature in 2018
(https://lore.kernel.org/linux-crypto/1537351855-16618-1-git-send-email-clabbe@baylibre.com/)
said "The goal is to have an ifconfig for crypto device." This doesn't
appear to have happened.
It's not clear that there is real demand for crypto statistics. Just
because the kernel provides other types of statistics such as I/O and
networking statistics and some people find those useful does not mean
that crypto statistics are useful too.
Further evidence that programs are not using CONFIG_CRYPTO_STATS is that
it was able to be disabled in RHEL and Fedora as a bug fix
(https://gitlab.com/redhat/centos-stream/src/kernel/centos-stream-9/-/merge_requests/2947).
Even further evidence comes from the fact that there are and have been
bugs in how the stats work, but they were never reported. For example,
before Linux v6.7 hash stats were double-counted in most cases.
There has also never been any documentation for this feature, so it
might be hard to use even if someone wanted to.
2. CONFIG_CRYPTO_STATS significantly reduces performance
Enabling CONFIG_CRYPTO_STATS significantly reduces the performance of
the crypto API, even if no program ever retrieves the statistics. This
primarily affects systems with large number of CPUs. For example,
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2039576 reported
that Lustre client encryption performance improved from 21.7GB/s to
48.2GB/s by disabling CONFIG_CRYPTO_STATS.
It can be argued that this means that CONFIG_CRYPTO_STATS should be
optimized with per-cpu counters similar to many of the networking
counters. But no one has done this in 5+ years. This is consistent
with the fact that the feature appears to be unused, so there seems to
be little interest in improving it as opposed to just disabling it.
It can be argued that because CONFIG_CRYPTO_STATS is off by default,
performance doesn't matter. But Linux distros tend to error on the side
of enabling options. The option is enabled in Ubuntu and Arch Linux,
and until recently was enabled in RHEL and Fedora (see above). So, even
just having the option available is harmful to users.
3. CONFIG_CRYPTO_STATS is a large maintenance burden
There are over 1000 lines of code associated with CONFIG_CRYPTO_STATS,
spread among 32 files. It significantly complicates much of the
implementation of the crypto API. After the initial submission, many
fixes and refactorings have consumed effort of multiple people to keep
this feature "working". We should be spending this effort elsewhere.
Cc: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The function dh_is_pubkey_valid was added to for FIPS but it was
only partially conditional to fips_enabled.
In particular, the first test in the function relies on the last
test to work properly, but the last test is only run in FIPS mode.
Fix this inconsistency by making the whole function conditional
on fips_enabled.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Correct various small problems in the help text:
a. change 2 spaces to ", "
b. finish an incomplete sentence
c. change non-working URL to working URL
Fixes: a9a98d49da52 ("crypto: Kconfig - simplify compression/RNG entries")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218458
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Robert Elliott <elliott@hpe.com>
Cc: Christoph Biedl <bugzilla.kernel.bpeb@manchmal.in-ulm.de>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Acked-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
Linus Torvalds
Joachim Vandersmissen
Eric Biggers
Wolfram Sang
Jakub Kicinski
Stefan Berger
Hailey Mothershead
Vadim Fedorenko
Lukas Wunner
Roman Smirnov
Thorsten Blum
Joel Granados
Vitaly Chikunov
Eric Dumazet
Herbert Xu
Barry Song
Vladis Dronov
Randy Dunlap
