| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
After recent changes in intel_pstate, global.turbo_disabled is only set
at the initialization time and never changed. However, it turns out
that on some systems the "turbo disabled" bit in MSR_IA32_MISC_ENABLE,
the initial state of which is reflected by global.turbo_disabled, can be
flipped later and there should be a way to take that into account (other
than checking that MSR every time the driver runs which is costly and
useless overhead on the vast majority of systems).
For this purpose, notice that before the changes in question,
store_no_turbo() contained a turbo_is_disabled() check that was used
for updating global.turbo_disabled if the "turbo disabled" bit in
MSR_IA32_MISC_ENABLE had been flipped and that functionality can be
restored. Then, users will be able to reset global.turbo_disabled
by writing 0 to no_turbo which used to work before on systems with
flipping "turbo disabled" bit.
This guarantees the driver state to remain in sync, but READ_ONCE()
annotations need to be added in two places where global.turbo_disabled
is accessed locklessly, so modify the driver to make that happen.
Fixes: 0940f1a8011f ("cpufreq: intel_pstate: Do not update global.turbo_disabled after initialization")
Closes: https://lore.kernel.org/linux-pm/bf3ebf1571a4788e97daf861eb493c12d42639a3.camel@xry111.site
Suggested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reported-by: Xi Ruoyao <xry111@xry111.site>
Tested-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Fix unchecked MSR access error for processors with no HWP support. On
such processors, maximum frequency can be changed by the system firmware
using ACPI event ACPI_PROCESSOR_NOTIFY_HIGEST_PERF_CHANGED. This results
in accessing HWP MSR 0x771.
Call Trace:
<TASK>
generic_exec_single+0x58/0x120
smp_call_function_single+0xbf/0x110
rdmsrl_on_cpu+0x46/0x60
intel_pstate_get_hwp_cap+0x1b/0x70
intel_pstate_update_limits+0x2a/0x60
acpi_processor_notify+0xb7/0x140
acpi_ev_notify_dispatch+0x3b/0x60
HWP MSR 0x771 can be only read on a CPU which supports HWP and enabled.
Hence intel_pstate_get_hwp_cap() can only be called when hwp_active is
true.
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Closes: https://lore.kernel.org/linux-pm/20240529155740.Hq2Hw7be@linutronix.de/
Fixes: e8217b4bece3 ("cpufreq: intel_pstate: Update the maximum CPU frequency consistently")
Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The nominal frequency in cpudata is maintained in MHz whereas all other
frequencies are in KHz. This means we have to convert nominal frequency
value to KHz before we do any interaction with other frequency values.
In amd_pstate_set_boost(), this conversion from MHz to KHz is missed,
fix that.
Tested on a AMD Zen4 EPYC server
Before:
$ cat /sys/devices/system/cpu/cpufreq/policy*/scaling_max_freq | uniq
2151
$ cat /sys/devices/system/cpu/cpufreq/policy*/cpuinfo_min_freq | uniq
400000
$ cat /sys/devices/system/cpu/cpufreq/policy*/scaling_cur_freq | uniq
2151
409422
After:
$ cat /sys/devices/system/cpu/cpufreq/policy*/scaling_max_freq | uniq
2151000
$ cat /sys/devices/system/cpu/cpufreq/policy*/cpuinfo_min_freq | uniq
400000
$ cat /sys/devices/system/cpu/cpufreq/policy*/scaling_cur_freq | uniq
2151000
1799527
Fixes: ec437d71db77 ("cpufreq: amd-pstate: Introduce a new AMD P-State driver to support future processors")
Signed-off-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Acked-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Tested-by: Peter Jung <ptr1337@cachyos.org>
Cc: 5.17+ <stable@vger.kernel.org> # 5.17+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
When extra warnings are enabled, gcc points out a global variable
definition in a header:
In file included from drivers/cpufreq/amd-pstate-ut.c:29:
include/linux/amd-pstate.h:123:27: error: 'amd_pstate_mode_string' defined but not used [-Werror=unused-const-variable=]
123 | static const char * const amd_pstate_mode_string[] = {
| ^~~~~~~~~~~~~~~~~~~~~~
This header is only included from two files in the same directory,
and one of them uses only a single definition from it, so clean it
up by moving most of the contents into the driver that uses them,
and making shared bits a local header file.
Fixes: 36c5014e5460 ("cpufreq: amd-pstate: optimize driver working mode selection in amd_pstate_param()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix the amd-pstate driver and the operating performance point
(OPP) handling related to generic PM domains.
Specifics:
- Fix a memory leak in the exit path of amd-pstate (Peng Ma)
- Fix required_opp_tables handling in the cases when multiple generic
PM domains share one OPP table (Viresh Kumar)"
* tag 'pm-6.10-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
OPP: Fix required_opp_tables for multiple genpds using same table
cpufreq: amd-pstate: fix memory leak on CPU EPP exit
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Enable BPF Kernel Functions (kfuncs) in the powerpc BPF JIT.
- Allow per-process DEXCR (Dynamic Execution Control Register) settings
via prctl, notably NPHIE which controls hashst/hashchk for ROP
protection.
- Install powerpc selftests in sub-directories. Note this changes the
way run_kselftest.sh needs to be invoked for powerpc selftests.
- Change fadump (Firmware Assisted Dump) to better handle memory
add/remove.
- Add support for passing additional parameters to the fadump kernel.
- Add support for updating the kdump image on CPU/memory add/remove
events.
- Other small features, cleanups and fixes.
Thanks to Andrew Donnellan, Andy Shevchenko, Aneesh Kumar K.V, Arnd
Bergmann, Benjamin Gray, Bjorn Helgaas, Christian Zigotzky, Christophe
Jaillet, Christophe Leroy, Colin Ian King, Cédric Le Goater, Dr. David
Alan Gilbert, Erhard Furtner, Frank Li, GUO Zihua, Ganesh Goudar, Geoff
Levand, Ghanshyam Agrawal, Greg Kurz, Hari Bathini, Joel Stanley, Justin
Stitt, Kunwu Chan, Li Yang, Lidong Zhong, Madhavan Srinivasan, Mahesh
Salgaonkar, Masahiro Yamada, Matthias Schiffer, Naresh Kamboju, Nathan
Chancellor, Nathan Lynch, Naveen N Rao, Nicholas Miehlbradt, Ran Wang,
Randy Dunlap, Ritesh Harjani, Sachin Sant, Shirisha Ganta, Shrikanth
Hegde, Sourabh Jain, Stephen Rothwell, sundar, Thorsten Blum, Vaibhav
Jain, Xiaowei Bao, Yang Li, and Zhao Chenhui.
* tag 'powerpc-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (85 commits)
powerpc/fadump: Fix section mismatch warning
powerpc/85xx: fix compile error without CONFIG_CRASH_DUMP
powerpc/fadump: update documentation about bootargs_append
powerpc/fadump: pass additional parameters when fadump is active
powerpc/fadump: setup additional parameters for dump capture kernel
powerpc/pseries/fadump: add support for multiple boot memory regions
selftests/powerpc/dexcr: Fix spelling mistake "predicition" -> "prediction"
KVM: PPC: Book3S HV nestedv2: Fix an error handling path in gs_msg_ops_kvmhv_nestedv2_config_fill_info()
KVM: PPC: Fix documentation for ppc mmu caps
KVM: PPC: code cleanup for kvmppc_book3s_irqprio_deliver
KVM: PPC: Book3S HV nestedv2: Cancel pending DEC exception
powerpc/xmon: Check cpu id in commands "c#", "dp#" and "dx#"
powerpc/code-patching: Use dedicated memory routines for patching
powerpc/code-patching: Test patch_instructions() during boot
powerpc64/kasan: Pass virtual addresses to kasan_init_phys_region()
powerpc: rename SPRN_HID2 define to SPRN_HID2_750FX
powerpc: Fix typos
powerpc/eeh: Fix spelling of the word "auxillary" and update comment
macintosh/ams: Fix unused variable warning
powerpc/Makefile: Remove bits related to the previous use of -mcmodel=large
...
|
|
The cpudata memory from kzalloc() in amd_pstate_epp_cpu_init() is
not freed in the analogous exit function, so fix that.
Signed-off-by: Peng Ma <andypma@tencent.com>
Acked-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Perry Yuan <Perry.Yuan@amd.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These are mostly cpufreq updates, including a significant intel-pstate
driver update and several amd-pstate improvements plus some updates of
ARM cpufreq drivers, general fixes and cleanups.
Also included are changes related to system sleep, power capping
updates adding support for a new platform and a new hardware feature
(among other things), a Samsung exynos-asv driver update allowing it
to change its Energy Model after adjusting voltage, minor cpuidle and
devfreq updates and a small documentation cleanup.
Specifics:
- Rework the handling of disabled turbo in the intel_pstate driver
and make it update the maximum CPU frequency consistently
regardless of the reason on top of a number of cleanups (Rafael
Wysocki)
- Add missing checks for NULL .exit() cpufreq driver callback to the
cpufreq core (Viresh Kumar)
- Prevent pulicy->max from going above the frequency QoS maximum
value when cpufreq_frequency_table_verify() is used (Xuewen Yan)
- Prevent a negative CPU number or frequency value from being printed
if they are really large (Joshua Yeong)
- Update MAINTAINERS entry for amd-pstate to add two new
submaintainers and a designated reviewer (Huang Rui)
- Clean up the amd-pstate driver and update its documentation
(Gautham Shenoy)
- Fix the highest frequency issue in the amd-pstate driver which
limits performance (Perry Yuan)
- Enable CPPC v2 for certain processors in the family 17H, as
requested by TR40 processor users who expect improved performance
and lower system temperature (Perry Yuan)
- Change latency and delay values to be read from platform firmware
firstly for more accurate timing (Perry Yuan)
- A new quirk is introduced for supporting amd-pstate on legacy
processors which either lack CPPC capability, or only only have
CPPC v2 capability (Perry Yuan)
- Sun50i cpufreq: Add support for opp_supported_hw, H616 platform and
general cleanups (Andre Przywara, Martin Botka, Brandon Cheo Fusi,
Dan Carpenter, Viresh Kumar)
- CPPC cpufreq: Fix possible null pointer dereference (Aleksandr
Mishin)
- Eliminate uses of of_node_put() from cpufreq (Javier Carrasco,
Shivani Gupta)
- brcmstb-avs: ISO C90 forbids mixed declarations (Portia Stephens)
- mediatek cpufreq: Add support for MT7988A (Sam Shih)
- cpufreq-qcom-hw: Add SM4450 compatibles in DT bindings (Tengfei
Fan)
- Fix struct cpudata::epp_cached kernel-doc in the intel_pstate
cpufreq driver (Jeff Johnson)
- Fix kerneldoc description of ladder_do_selection() (Jeff Johnson)
- Convert the cpuidle kirkwood driver to platform remove callback
returning void (Yangtao Li)
- Replace deprecated strncpy() with strscpy() in the hibernation core
code (Justin Stitt)
- Use %ps to simplify debug output in the core system-wide suspend
and resume code (Len Brown)
- Remove unnecessary else from device_init_wakeup() and make
device_wakeup_disable() return void (Dhruva Gole)
- Enable PMU support in the Intel TPMI RAPL driver (Zhang Rui)
- Add support for ArrowLake-H platform to the Intel RAPL driver
(Zhang Rui)
- Avoid explicit cpumask allocation on stack in DTPM (Dawei Li)
- Make the Samsung exynos-asv driver update the Energy Model after
adjusting voltage on top of some preliminary changes of the OPP and
Enery Model generic code (Lukasz Luba)
- Remove a reference to a function that has been dropped from the
power management documentation (Bjorn Helgaas)
- Convert the platfrom remove callback to .remove_new for the
exyno-nocp, exynos-ppmu, mtk-cci-devfreq, sun8i-a33-mbus, and
rk3399_dmc devfreq drivers (Uwe Kleine-König)
- Use DEFINE_SIMPLE_PM_OPS for exyno-bus.c driver (Anand Moon)"
* tag 'pm-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (68 commits)
PM / devfreq: exynos: Use DEFINE_SIMPLE_DEV_PM_OPS for PM functions
PM / devfreq: rk3399_dmc: Convert to platform remove callback returning void
PM / devfreq: sun8i-a33-mbus: Convert to platform remove callback returning void
PM / devfreq: mtk-cci: Convert to platform remove callback returning void
PM / devfreq: exynos-ppmu: Convert to platform remove callback returning void
PM / devfreq: exynos-nocp: Convert to platform remove callback returning void
cpufreq: amd-pstate: fix the highest frequency issue which limits performance
cpufreq: intel_pstate: fix struct cpudata::epp_cached kernel-doc
cpuidle: ladder: fix ladder_do_selection() kernel-doc
powercap: intel_rapl_tpmi: Enable PMU support
powercap: intel_rapl: Introduce APIs for PMU support
PM: hibernate: replace deprecated strncpy() with strscpy()
cpufreq: Fix up printing large CPU numbers and frequency values
MAINTAINERS: cpufreq: amd-pstate: Add co-maintainers and reviewer
cpufreq: amd-pstate: remove unused variable lowest_nonlinear_freq
cpufreq: amd-pstate: fix code format problems
cpufreq: amd-pstate: Add quirk for the pstate CPPC capabilities missing
cppc_acpi: print error message if CPPC is unsupported
cpufreq: amd-pstate: get transition delay and latency value from ACPI tables
cpufreq: amd-pstate: Bail out if min/max/nominal_freq is 0
...
|
|
To address the performance drop issue, an optimization has been
implemented. The incorrect highest performance value previously set by the
low-level power firmware for AMD CPUs with Family ID 0x19 and Model ID
ranging from 0x70 to 0x7F series has been identified as the cause.
To resolve this, a check has been implemented to accurately determine the
CPU family and model ID. The correct highest performance value is now set
and the performance drop caused by the incorrect highest performance value
are eliminated.
Before the fix, the highest frequency was set to 4200MHz, now it is set
to 4971MHz which is correct.
CPU NODE SOCKET CORE L1d:L1i:L2:L3 ONLINE MAXMHZ MINMHZ MHZ
0 0 0 0 0:0:0:0 yes 4971.0000 400.0000 400.0000
1 0 0 0 0:0:0:0 yes 4971.0000 400.0000 400.0000
2 0 0 1 1:1:1:0 yes 4971.0000 400.0000 4865.8140
3 0 0 1 1:1:1:0 yes 4971.0000 400.0000 400.0000
Fixes: f3a052391822 ("cpufreq: amd-pstate: Enable amd-pstate preferred core support")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218759
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Co-developed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Gaha Bana <gahabana@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This register number is hardware-specific, rename it for clarity.
FIXME comments are added in a few places where it seems like the wrong
register is used. As I can't test this, only the rename is done with no
functional change.
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240124105031.45734-1-matthias.schiffer@ew.tq-group.com
|
|
make C=1 currently gives the following warning:
drivers/cpufreq/intel_pstate.c:262: warning: Function parameter or struct member 'epp_cached' not described in 'cpudata'
Add the missing ":" to fix the trivial kernel-doc syntax error.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Merge AMD P-state driver changes from Perry Yuan for v6.10:
"- Enable CPPC v2 for certain processors in the family 17H, as requested
by TR40 processor users who expect improved performance and lower
system temperature.
- Change latency and delay values to be read from platform firmware
firstly for more accurate timing.
- A new quirk is introduced for supporting amd-pstate on legacy
processors which either lack CPPC capability, or only only have CPPC
v2 capability."
* amd-pstate:
MAINTAINERS: cpufreq: amd-pstate: Add co-maintainers and reviewer
cpufreq: amd-pstate: remove unused variable lowest_nonlinear_freq
cpufreq: amd-pstate: fix code format problems
cpufreq: amd-pstate: Add quirk for the pstate CPPC capabilities missing
cppc_acpi: print error message if CPPC is unsupported
cpufreq: amd-pstate: get transition delay and latency value from ACPI tables
cpufreq: amd-pstate: Bail out if min/max/nominal_freq is 0
cpufreq: amd-pstate: Remove amd_get_{min,max,nominal,lowest_nonlinear}_freq()
cpufreq: amd-pstate: Unify computation of {max,min,nominal,lowest_nonlinear}_freq
cpufreq: amd-pstate: Document the units for freq variables in amd_cpudata
cpufreq: amd-pstate: Document *_limit_* fields in struct amd_cpudata
|
|
A negative CPU number or frequency value may be printed if they are
really large (which is unlikely, though).
Signed-off-by: Joshua Yeong <joshua.yeong@starfivetech.com>
Reviewed-by: Thorsten Blum <thorsten.blum@toblux.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Subject and changelog edits. ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Merge ARM cpufreq updates for 6.10 from Viresh Kumar:
"- Sun50i: Add support for opp_supported_hw, H616 platform and general
cleaups (Andre Przywara, Martin Botka, Brandon Cheo Fusi, Dan
Carpenter, and Viresh Kumar).
- cppc: Fix possible null pointer dereference (Aleksandr Mishin).
- Eliminate uses of of_node_put() (Javier Carrasco, and Shivani Gupta).
- brcmstb-avs: ISO C90 forbids mixed declarations (Portia Stephens).
- mediatek: Add support for MT7988A (Sam Shih).
- cpufreq-qcom-hw: Add SM4450 compatibles in DT bindings (Tengfei
Fan)."
* tag 'cpufreq-arm-updates-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM4450 compatibles
cpufreq: sun50i: fix error returns in dt_has_supported_hw()
cpufreq: brcmstb-avs-cpufreq: ISO C90 forbids mixed declarations
cpufreq: dt-platdev: eliminate uses of of_node_put()
cpufreq: dt: eliminate uses of of_node_put()
cpufreq: ti: Implement scope-based cleanup in ti_cpufreq_match_node()
cpufreq: mediatek: Add support for MT7988A
cpufreq: sun50i: Fix build warning around snprint()
arm64: dts: allwinner: h616: enable DVFS for all boards
arm64: dts: allwinner: h616: Add CPU OPPs table
cpufreq: sun50i: Add H616 support
cpufreq: sun50i: Add support for opp_supported_hw
cpufreq: sun50i: Refactor speed bin decoding
dt-bindings: opp: Describe H616 OPPs and opp-supported-hw
cpufreq: dt-platdev: Blocklist Allwinner H616/618 SoCs
firmware: smccc: Export revision soc_id function
cppc_cpufreq: Fix possible null pointer dereference
cpupfreq: tegra124: eliminate uses of of_node_put()
|
|
removed the unused variable `lowest_nonlinear_freq` for build warning.
This variable was defined and assigned a value in the previous code,
but it was not used in the subsequent code.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202404271038.em6nJjzy-lkp@intel.com/
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
get some code format problems fixed in the amd-pstate driver.
Changes Made:
- Fixed incorrect comment format in the functions.
- Removed unnecessary blank line.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202404271148.HK9yHBlB-lkp@intel.com/
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add quirks table to get CPPC capabilities issue fixed by providing
correct perf or frequency values while driver loading.
If CPPC capabilities are not defined in the ACPI tables or wrongly
defined by platform firmware, it needs to use quick to get those
issues fixed with correct workaround values to make pstate driver
can be loaded even though there are CPPC capabilities errors.
The workaround will match the broken BIOS which lack of CPPC capabilities
nominal_freq and lowest_freq definition in the ACPI table.
$ cat /sys/devices/system/cpu/cpu0/acpi_cppc/lowest_freq
0
$ cat /sys/devices/system/cpu/cpu0/acpi_cppc/nominal_freq
0
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Tested-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Make pstate driver initially retrieve the P-state transition delay and
latency values from the BIOS ACPI tables which has more reasonable
delay and latency values according to the platform design and
requirements.
Previously there values were hardcoded at specific value which may
have conflicted with platform and it might not reflect the most
accurate or optimized setting for the processor.
[054h 0084 8] Preserve Mask : FFFFFFFF00000000
[05Ch 0092 8] Write Mask : 0000000000000001
[064h 0100 4] Command Latency : 00000FA0
[068h 0104 4] Maximum Access Rate : 0000EA60
[06Ch 0108 2] Minimum Turnaround Time : 0000
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The amd-pstate driver cannot work when the min_freq, nominal_freq or
the max_freq is zero. When this happens it is prudent to error out
early on rather than waiting failing at the time of the governor
initialization.
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Tested-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
amd_get_{min,max,nominal,lowest_nonlinear}_freq() functions merely
return cpudata->{min,max,nominal,lowest_nonlinear}_freq values.
There is no loss in readability in replacing their invocations by
accesses to the corresponding members of cpudata.
Do so and remove these helper functions.
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Li Meng <li.meng@amd.com>
Tested-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
{max,min,nominal,lowest_nonlinear}_freq
Currently the amd_get_{min, max, nominal, lowest_nonlinear}_freq()
helpers computes the values of min_freq, max_freq, nominal_freq and
lowest_nominal_freq respectively afresh from
cppc_get_perf_caps(). This is not necessary as there are fields in
cpudata to cache these values.
To simplify this, add a single helper function named
amd_pstate_init_freq() which computes all these frequencies at once, and
caches it in cpudata.
Use the cached values everywhere else in the code.
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Li Meng <li.meng@amd.com>
Tested-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Co-developed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The dt_has_supported_hw() function returns type bool. That means these
negative error codes are cast to true but the function should return
false instead.
Fixes: fa5aec9561cf ("cpufreq: sun50i: Add support for opp_supported_hw")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
There is a compile warning because a NULL pointer check was added before
a struct was declared. This moves the NULL pointer check to after the
struct is declared and moves the struct assignment to after the NULL
pointer check.
Fixes: f661017e6d32 ("cpufreq: brcmstb-avs-cpufreq: add check for cpufreq_cpu_get's return value")
Signed-off-by: Portia Stephens <portia.stephens@canonical.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
arch_update_hw_pressure()
Now that cpufreq provides a pressure value to the scheduler, rename
arch_update_thermal_pressure into HW pressure to reflect that it returns
a pressure applied by HW (i.e. with a high frequency change) and not
always related to thermal mitigation but also generated by max current
limitation as an example. Such high frequency signal needs filtering to be
smoothed and provide an value that reflects the average available capacity
into the scheduler time scale.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Qais Yousef <qyousef@layalina.io>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lore.kernel.org/r/20240326091616.3696851-5-vincent.guittot@linaro.org
|
|
Provide to the scheduler a feedback about the temporary max available
capacity. Unlike arch_update_thermal_pressure(), this doesn't need to be
filtered as the pressure will happen for dozens of ms or more.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Qais Yousef <qyousef@layalina.io>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20240326091616.3696851-2-vincent.guittot@linaro.org
|
|
Make use of the __free() cleanup handler to automatically free nodes
when they get out of scope.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Make use of the __free() cleanup handler to automatically free nodes
when they get out of scope.
Only find_supply_name() is affected, and the new mechanism removes the
need for a 'goto' and the 'name' local variable.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Modify the ti_cpufreq_match_node() function to utilize the __free()
cleanup handler for automatically releasing the device node when it goes
out of scope.
By moving the declaration to the initialization, the patch ensures that
the device node is properly managed throughout the function's scope,
thus eliminating the need for manual invocation of of_node_put().
This approach reduces the potential for memory leaks.
Suggested-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Shivani Gupta <shivani07g@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
This add cpufreq support for mediatek MT7988A SoC.
The platform data of MT7988A is different from previous MediaTek SoCs,
so we add a new compatible and platform data for it.
Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The Sun50i driver generates a warning with W=1:
warning: '%d' directive output may be truncated writing between 1 and 10 bytes into a region of size 2 [-Wformat-truncation=]
Fix it by allocating a big enough array to print an integer.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202404191715.LDwMm2gP-lkp@intel.com/
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Julian Calaby <julian.calaby@gmail.com>
|
|
The Allwinner H616/H618 SoCs have different OPP tables per SoC version
and die revision. The SoC version is stored in NVMEM, as before, though
encoded differently. The die revision is in a different register, in the
SRAM controller. Firmware already exports that value in a standardised
way, through the SMCCC SoCID mechanism. We need both values, as some chips
have the same SoC version, but they don't support the same frequencies and
they get differentiated by the die revision.
Add the new compatible string and tie the new translation function to
it. This mechanism not only covers the original H616 SoC, but also its
very close sibling SoCs H618 and H700, so add them to the list as well.
Signed-off-by: Martin Botka <martin.botka@somainline.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The opp_supported_hw DT property allows the DT to specify a mask of chip
revisions that a certain OPP is eligible for. This allows for easy
limiting of maximum frequencies, for instance.
Add support for that in the sun50i-cpufreq-nvmem driver. We support both
the existing opp-microvolt suffix properties as well as the
opp-supported-hw property, the generic code figures out which is needed
automatically.
However if none of the DT OPP nodes contain an opp-supported-hw
property, the core code will ignore all OPPs and the driver will fail
probing. So check the DT's eligibility first before using that feature.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Make converting the speed bin value into a speed grade generic and
determined by a platform specific callback. Also change the prototypes
involved to encode the speed bin directly in the return value.
This allows to extend the driver more easily to support more SoCs.
Signed-off-by: Brandon Cheo Fusi <fusibrandon13@gmail.com>
[Andre: merge output into return value]
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The AllWinner H616 SoC will use the (extended) H6 OPP driver, so add
them to the cpufreq-dt blocklist, to not create the device twice.
This also affects the closely related sibling SoCs H618 and H700.
Signed-off-by: Martin Botka <martin.botka@somainline.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
cppc_cpufreq_get_rate() and hisi_cppc_cpufreq_get_rate() can be called from
different places with various parameters. So cpufreq_cpu_get() can return
null as 'policy' in some circumstances.
Fix this bug by adding null return check.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: a28b2bfc099c ("cppc_cpufreq: replace per-cpu data array with a list")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Make use of the __free() cleanup handler to automatically free nodes
when they get out of scope. Only the probe function is affected by this
modification.
Given that this mechanism requires the node to be initialized, its
initialization and the value check have been moved to the top of the
function.
After removing uses of of_node_put(), the jump to out_put_np is no
longer necessary.
Suggested-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The exit() callback is optional and shouldn't be called without checking
a valid pointer first.
Also, we must clear freq_table pointer even if the exit() callback isn't
present.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Fixes: 91a12e91dc39 ("cpufreq: Allow light-weight tear down and bring up of CPUs")
Fixes: f339f3541701 ("cpufreq: Rearrange locking in cpufreq_remove_dev()")
Reported-by: Lizhe <sensor1010@163.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
|
|
The reference to this variable is hidden in an #ifdef:
drivers/cpufreq/intel_pstate.c:2440:32: error: 'intel_pstate_cpu_oob_ids' defined but not used [-Werror=unused-const-variable=]
Use the same check around the definition.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
There are 3 places at which the maximum CPU frequency may change,
store_no_turbo(), intel_pstate_update_limits() (when called by the
cpufreq core) and intel_pstate_notify_work() (when handling a HWP
change notification). Currently, cpuinfo.max_freq is only updated by
store_no_turbo() and intel_pstate_notify_work(), although it principle
it may be necessary to update it in intel_pstate_update_limits() either.
Make all of them mutually consistent.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
Replace the global.turbo_disabled in __intel_pstate_update_max_freq() with
a global.no_turbo one to make store_no_turbo() actually update the maximum
CPU frequency on the trubo preference changes, which needs to be consistent
with arch_set_max_freq_ratio() called from there.
For more consistency, replace the global.turbo_disabled checks in
__intel_pstate_cpu_init() and intel_cpufreq_adjust_perf() with
global.no_turbo checks either.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
Because global.no_turbo is generally not read under intel_pstate_driver_lock
make store_no_turbo() use WRITE_ONCE() for updating it (this is the only
place at which it is updated except for the initialization) and make the
majority of places reading it use READ_ONCE().
Also remove redundant global.turbo_disabled checks from places that
depend on the 'true' value of global.no_turbo because it can only be
'true' if global.turbo_disabled is also 'true'.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
Now that global.turbo_disabled can only change at the cpufreq driver
registration time, initialize global.no_turbo at that time too so they
are in sync to start with (if the former is set, the latter cannot be
updated later anyway).
That allows show_no_turbo() to be simlified because it does not need
to check global.turbo_disabled and store_no_turbo() can be rearranged
to avoid doing anything if the new value of global.no_turbo is equal
to the current one and only return an error on attempts to clear
global.no_turbo when global.turbo_disabled.
While at it, eliminate the redundant ret variable from store_no_turbo().
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
The global.turbo_disabled is updated quite often, especially in the
passive mode in which case it is updated every time the scheduler calls
into the driver. However, this is generally not necessary and it adds
MSR read overhead to scheduler code paths (and that particular MSR is
slow to read).
For this reason, make the driver read MSR_IA32_MISC_ENABLE_TURBO_DISABLE
just once at the cpufreq driver registration time and remove all of the
in-flight updates of global.turbo_disabled.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
Fold intel_pstate_max_within_limits() into its only caller.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
There are at least 3 variables in intel_pstate that do not get updated
after they have been initialized, so annotate them with __ro_after_init.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Drop two redundant checks involving READ_ONCE() from notify_hwp_interrupt()
and make it check hwp_active without READ_ONCE() which is not necessary,
because that variable is only set once during the early initialization of
the driver.
In order to make that clear, annotate hwp_active with __ro_after_init.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Make intel_pstate_disable_hwp_interrupt() wait for canceled delayed work
to complete to avoid leftover work items running when it returns which
may be during driver unregistration and may confuse things going forward.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Because intel_pstate_enable/disable_hwp_interrupt() are only called from
thread context, they need not save the IRQ flags when using a spinlock
as interrupts are guaranteed to be enabled when they run, so make them
use spin_lock/unlock_irq().
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Remove the spinlock locking from intel_pstate_driver_cleanup() as it is
not necessary because no other code accessing all_cpu_data[] can run in
parallel with that function.
Had the locking been necessary, though, it would have been incorrect
because the lock in question is acquired from a hardirq handler and
it cannot be acquired from thread context without disabling interrupts.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
Rafael J. Wysocki
Srinivas Pandruvada
Dhananjay Ugwekar
Arnd Bergmann
Linus Torvalds
Peng Ma
Perry Yuan
Matthias Schiffer
Jeff Johnson
Joshua Yeong
Gautham R. Shenoy
Dan Carpenter
Portia Stephens
Vincent Guittot
Javier Carrasco
Shivani Gupta
Sam Shih
Viresh Kumar
Martin Botka
Andre Przywara
Brandon Cheo Fusi
Aleksandr Mishin
