| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
__hwrm_send()
In case of token is released due to token->state == BNXT_HWRM_DEFERRED,
released token (set to NULL) is used in log messages. This issue is
expected to be prevented by HWRM_ERR_CODE_PF_UNAVAILABLE error code. But
this error code is returned by recent firmware. So some firmware may not
return it. This may lead to NULL pointer dereference.
Adjust this issue by adding token pointer check.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 8fa4219dba8e ("bnxt_en: add dynamic debug support for HWRM messages")
Suggested-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240611082547.12178-1-amishin@t-argos.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Firmware interface 1.10.2.118 has increased the size of
HWRM_PORT_PHY_QCFG response beyond the maximum size that can be
forwarded. When the VF's link state is not the default auto state,
the PF will need to forward the response back to the VF to indicate
the forced state. This regression may cause the VF to fail to
initialize.
Fix it by capping the HWRM_PORT_PHY_QCFG response to the maximum
96 bytes. The SPEEDS2_SUPPORTED flag needs to be cleared because the
new speeds2 fields are beyond the legacy structure. Also modify
bnxt_hwrm_fwd_resp() to print a warning if the message size exceeds 96
bytes to make this failure more obvious.
Fixes: 84a911db8305 ("bnxt_en: Update firmware interface to 1.10.2.118")
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240612231736.57823-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
gve_rx_free_skb incorrectly leaves napi->skb referencing an skb after it
is freed with dev_kfree_skb_any(). This can result in a subsequent call
to napi_get_frags returning a dangling pointer.
Fix this by clearing napi->skb before the skb is freed.
Fixes: 9b8dd5e5ea48 ("gve: DQO: Add RX path")
Cc: stable@vger.kernel.org
Reported-by: Shailend Chand <shailend@google.com>
Signed-off-by: Ziwei Xiao <ziweixiao@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Shailend Chand <shailend@google.com>
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Link: https://lore.kernel.org/r/20240612001654.923887-1-ziweixiao@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When queues are started, netif_napi_add() and napi_enable() are called.
If there are 4 queues and only 3 queues are used for the current
configuration, only 3 queues' napi should be registered and enabled.
The ionic_qcq_enable() checks whether the .poll pointer is not NULL for
enabling only the using queue' napi. Unused queues' napi will not be
registered by netif_napi_add(), so the .poll pointer indicates NULL.
But it couldn't distinguish whether the napi was unregistered or not
because netif_napi_del() doesn't reset the .poll pointer to NULL.
So, ionic_qcq_enable() calls napi_enable() for the queue, which was
unregistered by netif_napi_del().
Reproducer:
ethtool -L <interface name> rx 1 tx 1 combined 0
ethtool -L <interface name> rx 0 tx 0 combined 1
ethtool -L <interface name> rx 0 tx 0 combined 4
Splat looks like:
kernel BUG at net/core/dev.c:6666!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 3 PID: 1057 Comm: kworker/3:3 Not tainted 6.10.0-rc2+ #16
Workqueue: events ionic_lif_deferred_work [ionic]
RIP: 0010:napi_enable+0x3b/0x40
Code: 48 89 c2 48 83 e2 f6 80 b9 61 09 00 00 00 74 0d 48 83 bf 60 01 00 00 00 74 03 80 ce 01 f0 4f
RSP: 0018:ffffb6ed83227d48 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff97560cda0828 RCX: 0000000000000029
RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff97560cda0a28
RBP: ffffb6ed83227d50 R08: 0000000000000400 R09: 0000000000000001
R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000000
R13: ffff97560ce3c1a0 R14: 0000000000000000 R15: ffff975613ba0a20
FS: 0000000000000000(0000) GS:ffff975d5f780000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f8f734ee200 CR3: 0000000103e50000 CR4: 00000000007506f0
PKRU: 55555554
Call Trace:
<TASK>
? die+0x33/0x90
? do_trap+0xd9/0x100
? napi_enable+0x3b/0x40
? do_error_trap+0x83/0xb0
? napi_enable+0x3b/0x40
? napi_enable+0x3b/0x40
? exc_invalid_op+0x4e/0x70
? napi_enable+0x3b/0x40
? asm_exc_invalid_op+0x16/0x20
? napi_enable+0x3b/0x40
ionic_qcq_enable+0xb7/0x180 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8]
ionic_start_queues+0xc4/0x290 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8]
ionic_link_status_check+0x11c/0x170 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8]
ionic_lif_deferred_work+0x129/0x280 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8]
process_one_work+0x145/0x360
worker_thread+0x2bb/0x3d0
? __pfx_worker_thread+0x10/0x10
kthread+0xcc/0x100
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2d/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
Fixes: 0f3154e6bcb3 ("ionic: Add Tx and Rx handling")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20240612060446.1754392-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit 86167183a17e03ec77198897975e9fdfbd53cb0b.
igc_ptp_init() needs to be called before igc_reset(), otherwise kernel
crash could be observed. Following the corresponding discussion [1] and
[2] revert this commit.
Link: https://lore.kernel.org/all/8fb634f8-7330-4cf4-a8ce-485af9c0a61a@intel.com/ [1]
Link: https://lore.kernel.org/all/87o78rmkhu.fsf@intel.com/ [2]
Fixes: 86167183a17e ("igc: fix a log entry using uninitialized netdev")
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20240611162456.961631-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
parameters
The current cbs parameter depends on speed after uplinking,
which is not needed and will report a configuration error
if the port is not initially connected. The UAPI exposed by
tc-cbs requires userspace to recalculate the send slope anyway,
because the formula depends on port_transmit_rate (see man tc-cbs),
which is not an invariant from tc's perspective. Therefore, we
use offload->sendslope and offload->idleslope to derive the
original port_transmit_rate from the CBS formula.
Fixes: 1f705bc61aee ("net: stmmac: Add support for CBS QDISC")
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20240608143524.2065736-1-xiaolei.wang@windriver.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
TSO currently fails when the skb's gso_type field has more than one bit
set.
TSO packets can be passed from userspace using PF_PACKET, TUNTAP and a
few others, using virtio_net_hdr (e.g., PACKET_VNET_HDR). This includes
virtualization, such as QEMU, a real use-case.
The gso_type and gso_size fields as passed from userspace in
virtio_net_hdr are not trusted blindly by the kernel. It adds gso_type
|= SKB_GSO_DODGY to force the packet to enter the software GSO stack
for verification.
This issue might similarly come up when the CWR bit is set in the TCP
header for congestion control, causing the SKB_GSO_TCP_ECN gso_type bit
to be set.
Fixes: a57e5de476be ("gve: DQO: Add TX path")
Signed-off-by: Joshua Washington <joshwash@google.com>
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Suggested-by: Eric Dumazet <edumazet@google.com>
Acked-by: Andrei Vagin <avagin@gmail.com>
v2 - Remove unnecessary comments, remove line break between fixes tag
and signoffs.
v3 - Add back unrelated empty line removal.
Link: https://lore.kernel.org/r/20240610225729.2985343-1-joshwash@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move the vxlan_features_check() call to after we verified the packet is
a tunneled VXLAN packet.
Without this, tunneled UDP non-VXLAN packets (for ex. GENENVE) might
wrongly not get offloaded.
In some cases, it worked by chance as GENEVE header is the same size as
VXLAN, but it is obviously incorrect.
Fixes: e3cfc7e6b7bd ("net/mlx5e: TX, Add geneve tunnel stateless offload support")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When innerprotoinherit is set, the tunneled packets do not have an inner
Ethernet header.
Change 'maclen' to not always assume the header length is ETH_HLEN, as
there might not be a MAC header.
This resolves issues with drivers (e.g. mlx5, in
mlx5e_tx_tunnel_accel()) who rely on the skb inner network header offset
to be correct, and use it for TX offloads.
Fixes: d8a6213d70ac ("geneve: fix header validation in geneve[6]_xmit_skb")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The documentation for device_get_named_child_node() mentions this
important point:
"
The caller is responsible for calling fwnode_handle_put() on the
returned fwnode pointer.
"
Add fwnode_handle_put() to avoid leaked references.
Fixes: 1e264f9d2918 ("net: dsa: qca8k: add LEDs basic support")
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The default ndo_get_iflink() implementation returns the current ifindex
of the netdev. But the overridden nsim_get_iflink() returns 0 if the
current nsim is not linked, breaking backwards compatibility for
userspace that depend on this behaviour.
Fix the problem by returning the current ifindex if not linked to a
peer.
Fixes: 8debcf5832c3 ("netdevsim: add ndo_get_iflink() implementation")
Reported-by: Yu Watanabe <watanabe.yu@gmail.com>
Suggested-by: Yu Watanabe <watanabe.yu@gmail.com>
Signed-off-by: David Wei <dw@davidwei.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 070246e4674b ("net: stmmac: Fix for mismatched host/device DMA
address width") added support in the stmmac driver for platform drivers
to indicate the host DMA width, but left it up to authors of the
specific platforms to indicate if their width differed from the addr64
register read from the MAC itself.
Qualcomm's EMAC4 integration supports only up to 36 bit width (as
opposed to the addr64 register indicating 40 bit width). Let's indicate
that in the platform driver to avoid a scenario where the driver will
allocate descriptors of size that is supported by the CPU which in our
case is 36 bit, but as the addr64 register is still capable of 40 bits
the device will use two descriptors as one address.
Fixes: 8c4d92e82d50 ("net: stmmac: dwmac-qcom-ethqos: add support for emac4 on sa8775p platforms")
Signed-off-by: Sagar Cheluvegowda <quic_scheluve@quicinc.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In lio_vf_rep_copy_packet() pg_info->page is compared to a NULL value,
but then it is unconditionally passed to skb_add_rx_frag() which looks
strange and could lead to null pointer dereference.
lio_vf_rep_copy_packet() call trace looks like:
octeon_droq_process_packets
octeon_droq_fast_process_packets
octeon_droq_dispatch_pkt
octeon_create_recv_info
...search in the dispatch_list...
->disp_fn(rdisp->rinfo, ...)
lio_vf_rep_pkt_recv(struct octeon_recv_info *recv_info, ...)
In this path there is no code which sets pg_info->page to NULL.
So this check looks unneeded and doesn't solve potential problem.
But I guess the author had reason to add a check and I have no such card
and can't do real test.
In addition, the code in the function liquidio_push_packet() in
liquidio/lio_core.c does exactly the same.
Based on this, I consider the most acceptable compromise solution to
adjust this issue by moving skb_add_rx_frag() into conditional scope.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 1f233f327913 ("liquidio: switchdev support for LiquidIO NIC")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently hns3 ring buffer init process would hold cpu too long with big
Tx/Rx ring depth. This could cause soft lockup.
So this patch adds cond_resched() to the process. Then cpu can break to
run other tasks instead of busy looping.
Fixes: a723fb8efe29 ("net: hns3: refine for set ring parameters")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When link status change, the nic driver need to notify the roce
driver to handle this event, but at this time, the roce driver
may uninit, then cause kernel crash.
To fix the problem, when link status change, need to check
whether the roce registered, and when uninit, need to wait link
update finish.
Fixes: 45e92b7e4e27 ("net: hns3: add calling roce callback function when link status change")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If the module is in SFP_MOD_ERROR, `sfp_sm_mod_remove()` will
not be run. As a consequence, `sfp_hwmon_remove()` is not getting
run either, leaving a stale `hwmon` device behind. `sfp_sm_mod_remove()`
itself checks `sfp->sm_mod_state` anyways, so this check was not
really needed in the first place.
Fixes: d2e816c0293f ("net: sfp: handle module remove outside state machine")
Signed-off-by: "Csókás, Bence" <csokas.bence@prolan.hu>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240605084251.63502-1-csokas.bence@prolan.hu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In case of region creation fail in ipc_devlink_create_region(), previously
created regions delete process starts from tainted pointer which actually
holds error code value.
Fix this bug by decreasing region index before delete.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 4dcd183fbd67 ("net: wwan: iosm: devlink registration")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Acked-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240604082500.20769-1-amishin@t-argos.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The commit 01cf893bf0f4 ("net: intel: i40e/igc: Remove setting Autoneg in
EEE capabilities") removed SUPPORTED_Autoneg field but left inappropriate
ethtool_keee structure initialization. When "ethtool --show <device>"
(get_eee) invoke, the 'ethtool_keee' structure was accidentally overridden.
Remove the 'ethtool_keee' overriding and add EEE declaration as per IEEE
specification that allows reporting Energy Efficient Ethernet capabilities.
Examples:
Before fix:
ethtool --show-eee enp174s0
EEE settings for enp174s0:
EEE status: not supported
After fix:
EEE settings for enp174s0:
EEE status: disabled
Tx LPI: disabled
Supported EEE link modes: 100baseT/Full
1000baseT/Full
2500baseT/Full
Fixes: 01cf893bf0f4 ("net: intel: i40e/igc: Remove setting Autoneg in EEE capabilities")
Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240603-net-2024-05-30-intel-net-fixes-v2-6-e3563aa89b0c@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ice_pf_dcb_recfg() re-maps queues to vectors with
ice_vsi_map_rings_to_vectors(), which does not restore the previous
state for XDP queues. This leads to no AF_XDP traffic after rebuild.
Map XDP queues to vectors in ice_vsi_map_rings_to_vectors().
Also, move the code around, so XDP queues are mapped independently only
through .ndo_bpf().
Fixes: 6624e780a577 ("ice: split ice_vsi_setup into smaller functions")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240603-net-2024-05-30-intel-net-fixes-v2-5-e3563aa89b0c@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 6624e780a577 ("ice: split ice_vsi_setup into smaller functions")
has placed ice_vsi_free_q_vectors() after ice_destroy_xdp_rings() in
the rebuild process. The behaviour of the XDP rings config functions is
context-dependent, so the change of order has led to
ice_destroy_xdp_rings() doing additional work and removing XDP prog, when
it was supposed to be preserved.
Also, dependency on the PF state reset flags creates an additional,
fortunately less common problem:
* PFR is requested e.g. by tx_timeout handler
* .ndo_bpf() is asked to delete the program, calls ice_destroy_xdp_rings(),
but reset flag is set, so rings are destroyed without deleting the
program
* ice_vsi_rebuild tries to delete non-existent XDP rings, because the
program is still on the VSI
* system crashes
With a similar race, when requested to attach a program,
ice_prepare_xdp_rings() can actually skip setting the program in the VSI
and nevertheless report success.
Instead of reverting to the old order of function calls, add an enum
argument to both ice_prepare_xdp_rings() and ice_destroy_xdp_rings() in
order to distinguish between calls from rebuild and .ndo_bpf().
Fixes: efc2214b6047 ("ice: Add support for XDP")
Reviewed-by: Igor Bagnucki <igor.bagnucki@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240603-net-2024-05-30-intel-net-fixes-v2-4-e3563aa89b0c@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Referenced commit has introduced a bitmap to distinguish between ZC and
copy-mode AF_XDP queues, because xsk_get_pool_from_qid() does not do this
for us.
The bitmap would be especially useful when restoring previous state after
rebuild, if only it was not reallocated in the process. This leads to e.g.
xdpsock dying after changing number of queues.
Instead of preserving the bitmap during the rebuild, remove it completely
and distinguish between ZC and copy-mode queues based on the presence of
a device associated with the pool.
Fixes: e102db780e1c ("ice: track AF_XDP ZC enabled queues in bitmap")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240603-net-2024-05-30-intel-net-fixes-v2-3-e3563aa89b0c@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ice driver reads data from the Shadow RAM portion of the NVM during
initialization, including data used to identify the NVM image and device,
such as the ETRACK ID used to populate devlink dev info fw.bundle.
Currently it is using a fixed offset defined by ICE_CSS_HEADER_LENGTH to
compute the appropriate offset. This worked fine for E810 and E822 devices
which both have CSS header length of 330 words.
Other devices, including both E825-C and E830 devices have different sizes
for their CSS header. The use of a hard coded value results in the driver
reading from the wrong block in the NVM when attempting to access the
Shadow RAM copy. This results in the driver reporting the fw.bundle as 0x0
in both the devlink dev info and ethtool -i output.
The first E830 support was introduced by commit ba20ecb1d1bb ("ice: Hook up
4 E830 devices by adding their IDs") and the first E825-C support was
introducted by commit f64e18944233 ("ice: introduce new E825C devices
family")
The NVM actually contains the CSS header length embedded in it. Remove the
hard coded value and replace it with logic to read the length from the NVM
directly. This is more resilient against all existing and future hardware,
vs looking up the expected values from a table. It ensures the driver will
read from the appropriate place when determining the ETRACK ID value used
for populating the fw.bundle_id and for reporting in ethtool -i.
The CSS header length for both the active and inactive flash bank is stored
in the ice_bank_info structure to avoid unnecessary duplicate work when
accessing multiple words of the Shadow RAM. Both banks are read in the
unlikely event that the header length is different for the NVM in the
inactive bank, rather than being different only by the overall device
family.
Fixes: ba20ecb1d1bb ("ice: Hook up 4 E830 devices by adding their IDs")
Co-developed-by: Paul Greenwalt <paul.greenwalt@intel.com>
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240603-net-2024-05-30-intel-net-fixes-v2-2-e3563aa89b0c@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ice_get_pfa_module_tlv() function iterates over the Type-Length-Value
structures in the Preserved Fields Area (PFA) of the NVM. This is used by
the driver to access data such as the Part Board Assembly identifier.
The function uses simple logic to iterate over the PFA. First, the pointer
to the PFA in the NVM is read. Then the total length of the PFA is read
from the first word.
A pointer to the first TLV is initialized, and a simple loop iterates over
each TLV. The pointer is moved forward through the NVM until it exceeds the
PFA area.
The logic seems sound, but it is missing a key detail. The Preserved
Fields Area length includes one additional final word. This is documented
in the device data sheet as a dummy word which contains 0xFFFF. All NVMs
have this extra word.
If the driver tries to scan for a TLV that is not in the PFA, it will read
past the size of the PFA. It reads and interprets the last dummy word of
the PFA as a TLV with type 0xFFFF. It then reads the word following the PFA
as a length.
The PFA resides within the Shadow RAM portion of the NVM, which is
relatively small. All of its offsets are within a 16-bit size. The PFA
pointer and TLV pointer are stored by the driver as 16-bit values.
In almost all cases, the word following the PFA will be such that
interpreting it as a length will result in 16-bit arithmetic overflow. Once
overflowed, the new next_tlv value is now below the maximum offset of the
PFA. Thus, the driver will continue to iterate the data as TLVs. In the
worst case, the driver hits on a sequence of reads which loop back to
reading the same offsets in an endless loop.
To fix this, we need to correct the loop iteration check to account for
this extra word at the end of the PFA. This alone is sufficient to resolve
the known cases of this issue in the field. However, it is plausible that
an NVM could be misconfigured or have corrupt data which results in the
same kind of overflow. Protect against this by using check_add_overflow
when calculating both the maximum offset of the TLVs, and when calculating
the next_tlv offset at the end of each loop iteration. This ensures that
the driver will not get stuck in an infinite loop when scanning the PFA.
Fixes: e961b679fb0b ("ice: add board identifier info to devlink .info_get")
Co-developed-by: Paul Greenwalt <paul.greenwalt@intel.com>
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240603-net-2024-05-30-intel-net-fixes-v2-1-e3563aa89b0c@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In case of flow rule creation fail in mlx5_lag_create_port_sel_table(),
instead of previously created rules, the tainted pointer is deleted
deveral times.
Fix this bug by using correct flow rules pointers.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 352899f384d4 ("net/mlx5: Lag, use buckets in hash mode")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240604100552.25201-1-amishin@t-argos.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, if teardown_hca fails to execute during driver removal, mlx5
does not stop the health timer. Afterwards, mlx5 continue with driver
teardown. This may lead to a UAF bug, which results in page fault
Oops[1], since the health timer invokes after resources were freed.
Hence, stop the health monitor even if teardown_hca fails.
[1]
mlx5_core 0000:18:00.0: E-Switch: Unload vfs: mode(LEGACY), nvfs(0), necvfs(0), active vports(0)
mlx5_core 0000:18:00.0: E-Switch: Disable: mode(LEGACY), nvfs(0), necvfs(0), active vports(0)
mlx5_core 0000:18:00.0: E-Switch: Disable: mode(LEGACY), nvfs(0), necvfs(0), active vports(0)
mlx5_core 0000:18:00.0: E-Switch: cleanup
mlx5_core 0000:18:00.0: wait_func:1155:(pid 1967079): TEARDOWN_HCA(0x103) timeout. Will cause a leak of a command resource
mlx5_core 0000:18:00.0: mlx5_function_close:1288:(pid 1967079): tear_down_hca failed, skip cleanup
BUG: unable to handle page fault for address: ffffa26487064230
PGD 100c00067 P4D 100c00067 PUD 100e5a067 PMD 105ed7067 PTE 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G OE ------- --- 6.7.0-68.fc38.x86_64 #1
Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0013.121520200651 12/15/2020
RIP: 0010:ioread32be+0x34/0x60
RSP: 0018:ffffa26480003e58 EFLAGS: 00010292
RAX: ffffa26487064200 RBX: ffff9042d08161a0 RCX: ffff904c108222c0
RDX: 000000010bbf1b80 RSI: ffffffffc055ddb0 RDI: ffffa26487064230
RBP: ffff9042d08161a0 R08: 0000000000000022 R09: ffff904c108222e8
R10: 0000000000000004 R11: 0000000000000441 R12: ffffffffc055ddb0
R13: ffffa26487064200 R14: ffffa26480003f00 R15: ffff904c108222c0
FS: 0000000000000000(0000) GS:ffff904c10800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffa26487064230 CR3: 00000002c4420006 CR4: 00000000007706f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<IRQ>
? __die+0x23/0x70
? page_fault_oops+0x171/0x4e0
? exc_page_fault+0x175/0x180
? asm_exc_page_fault+0x26/0x30
? __pfx_poll_health+0x10/0x10 [mlx5_core]
? __pfx_poll_health+0x10/0x10 [mlx5_core]
? ioread32be+0x34/0x60
mlx5_health_check_fatal_sensors+0x20/0x100 [mlx5_core]
? __pfx_poll_health+0x10/0x10 [mlx5_core]
poll_health+0x42/0x230 [mlx5_core]
? __next_timer_interrupt+0xbc/0x110
? __pfx_poll_health+0x10/0x10 [mlx5_core]
call_timer_fn+0x21/0x130
? __pfx_poll_health+0x10/0x10 [mlx5_core]
__run_timers+0x222/0x2c0
run_timer_softirq+0x1d/0x40
__do_softirq+0xc9/0x2c8
__irq_exit_rcu+0xa6/0xc0
sysvec_apic_timer_interrupt+0x72/0x90
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1a/0x20
RIP: 0010:cpuidle_enter_state+0xcc/0x440
? cpuidle_enter_state+0xbd/0x440
cpuidle_enter+0x2d/0x40
do_idle+0x20d/0x270
cpu_startup_entry+0x2a/0x30
rest_init+0xd0/0xd0
arch_call_rest_init+0xe/0x30
start_kernel+0x709/0xa90
x86_64_start_reservations+0x18/0x30
x86_64_start_kernel+0x96/0xa0
secondary_startup_64_no_verify+0x18f/0x19b
---[ end trace 0000000000000000 ]---
Fixes: 9b98d395b85d ("net/mlx5: Start health poll at earlier stage of driver load")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In case pci channel becomes offline the driver should not wait for PCI
reads during health dump and recovery flow. The driver has timeout for
each of these loops trying to read PCI, so it would fail anyway.
However, in case of recovery waiting till timeout may cause the pci
error_detected() callback fail to meet pci_dpc_recovered() wait timeout.
Fixes: b3bd076f7501 ("net/mlx5: Report devlink health on FW fatal issues")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Shay Drori <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The mainline MTK ethernet driver suffers long time from rarly but
annoying tx queue timeouts. We think that this is caused by fixed
dma sizes hardcoded for all SoCs.
We suspect this problem arises from a low level of free TX DMADs,
the TX Ring alomost full.
The transmit timeout is caused by the Tx queue not waking up. The
Tx queue stops when the free counter is less than ring->thres, and
it will wake up once the free counter is greater than ring->thres.
If the CPU is too late to wake up the Tx queues, it may cause a
transmit timeout.
Therefore, we increased the TX and RX DMADs to improve this error
situation.
Use the dma-size implementation from SDK in a per SoC manner. In
difference to SDK we have no RSS feature yet, so all RX/TX sizes
should be raised from 512 to 2048 byte except fqdma on mt7988 to
avoid the tx timeout issue.
Fixes: 656e705243fd ("net-next: mediatek: add support for MT7623 ethernet")
Suggested-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit f58f45c1e5b9 ("vxlan: drop packets from invalid src-address")
has recently been added to vxlan mainly in the context of source
address snooping/learning so that when it is enabled, an entry in the
FDB is not being created for an invalid address for the corresponding
tunnel endpoint.
Before commit f58f45c1e5b9 vxlan was similarly behaving as geneve in
that it passed through whichever macs were set in the L2 header. It
turns out that this change in behavior breaks setups, for example,
Cilium with netkit in L3 mode for Pods as well as tunnel mode has been
passing before the change in f58f45c1e5b9 for both vxlan and geneve.
After mentioned change it is only passing for geneve as in case of
vxlan packets are dropped due to vxlan_set_mac() returning false as
source and destination macs are zero which for E/W traffic via tunnel
is totally fine.
Fix it by only opting into the is_valid_ether_addr() check in
vxlan_set_mac() when in fact source address snooping/learning is
actually enabled in vxlan. This is done by moving the check into
vxlan_snoop(). With this change, the Cilium connectivity test suite
passes again for both tunnel flavors.
Fixes: f58f45c1e5b9 ("vxlan: drop packets from invalid src-address")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Bauer <mail@david-bauer.net>
Cc: Ido Schimmel <idosch@nvidia.com>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Cc: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: David Bauer <mail@david-bauer.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the XDP_TX path, ionic driver sends a packet to the TX path with rx
page and corresponding dma address.
After tx is done, ionic_tx_clean() frees that page.
But RX ring buffer isn't reset to NULL.
So, it uses a freed page, which causes kernel panic.
BUG: unable to handle page fault for address: ffff8881576c110c
PGD 773801067 P4D 773801067 PUD 87f086067 PMD 87efca067 PTE 800ffffea893e060
Oops: Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN NOPTI
CPU: 1 PID: 25 Comm: ksoftirqd/1 Not tainted 6.9.0+ #11
Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 0603 11/01/2021
RIP: 0010:bpf_prog_f0b8caeac1068a55_balancer_ingress+0x3b/0x44f
Code: 00 53 41 55 41 56 41 57 b8 01 00 00 00 48 8b 5f 08 4c 8b 77 00 4c 89 f7 48 83 c7 0e 48 39 d8
RSP: 0018:ffff888104e6fa28 EFLAGS: 00010283
RAX: 0000000000000002 RBX: ffff8881576c1140 RCX: 0000000000000002
RDX: ffffffffc0051f64 RSI: ffffc90002d33048 RDI: ffff8881576c110e
RBP: ffff888104e6fa88 R08: 0000000000000000 R09: ffffed1027a04a23
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8881b03a21a8
R13: ffff8881589f800f R14: ffff8881576c1100 R15: 00000001576c1100
FS: 0000000000000000(0000) GS:ffff88881ae00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff8881576c110c CR3: 0000000767a90000 CR4: 00000000007506f0
PKRU: 55555554
Call Trace:
<TASK>
? __die+0x20/0x70
? page_fault_oops+0x254/0x790
? __pfx_page_fault_oops+0x10/0x10
? __pfx_is_prefetch.constprop.0+0x10/0x10
? search_bpf_extables+0x165/0x260
? fixup_exception+0x4a/0x970
? exc_page_fault+0xcb/0xe0
? asm_exc_page_fault+0x22/0x30
? 0xffffffffc0051f64
? bpf_prog_f0b8caeac1068a55_balancer_ingress+0x3b/0x44f
? do_raw_spin_unlock+0x54/0x220
ionic_rx_service+0x11ab/0x3010 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864]
? ionic_tx_clean+0x29b/0xc60 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864]
? __pfx_ionic_tx_clean+0x10/0x10 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864]
? __pfx_ionic_rx_service+0x10/0x10 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864]
? ionic_tx_cq_service+0x25d/0xa00 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864]
? __pfx_ionic_rx_service+0x10/0x10 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864]
ionic_cq_service+0x69/0x150 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864]
ionic_txrx_napi+0x11a/0x540 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864]
__napi_poll.constprop.0+0xa0/0x440
net_rx_action+0x7e7/0xc30
? __pfx_net_rx_action+0x10/0x10
Fixes: 8eeed8373e1c ("ionic: Add XDP_TX support")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
KSZ8061 needs to write to a MMD register at driver initialization to fix
an errata. This worked in 5.0 kernel but not in newer kernels. The
issue is the main phylib code no longer resets PHY at the very beginning.
Calling phy resuming code later will reset the chip if it is already
powered down at the beginning. This wipes out the MMD register write.
Solution is to implement a phy resume function for KSZ8061 to take care
of this problem.
Fixes: 232ba3a51cc2 ("net: phy: Micrel KSZ8061: link failure after cable connect")
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
PF mcam entries has to be at low priority always so that VF
can install longest prefix match rules at higher priority.
This was taken care currently but when priority allocation
wrt reference entry is requested then entries are allocated
from mid-zone instead of low priority zone. Fix this and
always allocate entries from low priority zone for PFs.
Fixes: 7df5b4b260dd ("octeontx2-af: Allocate low priority entries for PF")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v6.10-rc3
The first fixes for v6.10. And we have a big one, I suspect the
biggest wireless pull request we ever had. There are fixes all over,
both in stack and drivers. Likely the most important here are mt76 not
working on mt7615 devices, ath11k not being able to connect to 6 GHz
networks and rtlwifi suffering from packet loss. But of course there's
much more.
* tag 'wireless-2024-06-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: (37 commits)
wifi: rtlwifi: Ignore IEEE80211_CONF_CHANGE_RETRY_LIMITS
wifi: mt76: mt7615: add missing chanctx ops
wifi: wilc1000: document SRCU usage instead of SRCU
Revert "wifi: wilc1000: set atomic flag on kmemdup in srcu critical section"
Revert "wifi: wilc1000: convert list management to RCU"
wifi: mac80211: fix UBSAN noise in ieee80211_prep_hw_scan()
wifi: mac80211: correctly parse Spatial Reuse Parameter Set element
wifi: mac80211: fix Spatial Reuse element size check
wifi: iwlwifi: mvm: don't read past the mfuart notifcation
wifi: iwlwifi: mvm: Fix scan abort handling with HW rfkill
wifi: iwlwifi: mvm: check n_ssids before accessing the ssids
wifi: iwlwifi: mvm: properly set 6 GHz channel direct probe option
wifi: iwlwifi: mvm: handle BA session teardown in RF-kill
wifi: iwlwifi: mvm: Handle BIGTK cipher in kek_kck cmd
wifi: iwlwifi: mvm: remove stale STA link data during restart
wifi: iwlwifi: dbg_ini: move iwl_dbg_tlv_free outside of debugfs ifdef
wifi: iwlwifi: mvm: set properly mac header
wifi: iwlwifi: mvm: revert gen2 TX A-MPDU size to 64
wifi: iwlwifi: mvm: d3: fix WoWLAN command version lookup
wifi: iwlwifi: mvm: fix a crash on 7265
...
====================
Link: https://lore.kernel.org/r/20240603115129.9494CC2BD10@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When vmxnet3_rq_create() fails to allocate memory for rq->data_ring.base,
the subsequent call to vmxnet3_rq_destroy_all_rxdataring does not reset
rq->data_ring.desc_size for the data ring that failed, which presumably
causes the hypervisor to reference it on packet reception.
To fix this bug, rq->data_ring.desc_size needs to be set to 0 to tell
the hypervisor to disable this feature.
[ 95.436876] kernel BUG at net/core/skbuff.c:207!
[ 95.439074] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[ 95.440411] CPU: 7 PID: 0 Comm: swapper/7 Not tainted 6.9.3-dirty #1
[ 95.441558] Hardware name: VMware, Inc. VMware Virtual
Platform/440BX Desktop Reference Platform, BIOS 6.00 12/12/2018
[ 95.443481] RIP: 0010:skb_panic+0x4d/0x4f
[ 95.444404] Code: 4f 70 50 8b 87 c0 00 00 00 50 8b 87 bc 00 00 00 50
ff b7 d0 00 00 00 4c 8b 8f c8 00 00 00 48 c7 c7 68 e8 be 9f e8 63 58 f9
ff <0f> 0b 48 8b 14 24 48 c7 c1 d0 73 65 9f e8 a1 ff ff ff 48 8b 14 24
[ 95.447684] RSP: 0018:ffffa13340274dd0 EFLAGS: 00010246
[ 95.448762] RAX: 0000000000000089 RBX: ffff8fbbc72b02d0 RCX: 000000000000083f
[ 95.450148] RDX: 0000000000000000 RSI: 00000000000000f6 RDI: 000000000000083f
[ 95.451520] RBP: 000000000000002d R08: 0000000000000000 R09: ffffa13340274c60
[ 95.452886] R10: ffffffffa04ed468 R11: 0000000000000002 R12: 0000000000000000
[ 95.454293] R13: ffff8fbbdab3c2d0 R14: ffff8fbbdbd829e0 R15: ffff8fbbdbd809e0
[ 95.455682] FS: 0000000000000000(0000) GS:ffff8fbeefd80000(0000) knlGS:0000000000000000
[ 95.457178] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 95.458340] CR2: 00007fd0d1f650c8 CR3: 0000000115f28000 CR4: 00000000000406f0
[ 95.459791] Call Trace:
[ 95.460515] <IRQ>
[ 95.461180] ? __die_body.cold+0x19/0x27
[ 95.462150] ? die+0x2e/0x50
[ 95.462976] ? do_trap+0xca/0x110
[ 95.463973] ? do_error_trap+0x6a/0x90
[ 95.464966] ? skb_panic+0x4d/0x4f
[ 95.465901] ? exc_invalid_op+0x50/0x70
[ 95.466849] ? skb_panic+0x4d/0x4f
[ 95.467718] ? asm_exc_invalid_op+0x1a/0x20
[ 95.468758] ? skb_panic+0x4d/0x4f
[ 95.469655] skb_put.cold+0x10/0x10
[ 95.470573] vmxnet3_rq_rx_complete+0x862/0x11e0 [vmxnet3]
[ 95.471853] vmxnet3_poll_rx_only+0x36/0xb0 [vmxnet3]
[ 95.473185] __napi_poll+0x2b/0x160
[ 95.474145] net_rx_action+0x2c6/0x3b0
[ 95.475115] handle_softirqs+0xe7/0x2a0
[ 95.476122] __irq_exit_rcu+0x97/0xb0
[ 95.477109] common_interrupt+0x85/0xa0
[ 95.478102] </IRQ>
[ 95.478846] <TASK>
[ 95.479603] asm_common_interrupt+0x26/0x40
[ 95.480657] RIP: 0010:pv_native_safe_halt+0xf/0x20
[ 95.481801] Code: 22 d7 e9 54 87 01 00 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa eb 07 0f 00 2d 93 ba 3b 00 fb f4 <e9> 2c 87 01 00 66 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90
[ 95.485563] RSP: 0018:ffffa133400ffe58 EFLAGS: 00000246
[ 95.486882] RAX: 0000000000004000 RBX: ffff8fbbc1d14064 RCX: 0000000000000000
[ 95.488477] RDX: ffff8fbeefd80000 RSI: ffff8fbbc1d14000 RDI: 0000000000000001
[ 95.490067] RBP: ffff8fbbc1d14064 R08: ffffffffa0652260 R09: 00000000000010d3
[ 95.491683] R10: 0000000000000018 R11: ffff8fbeefdb4764 R12: ffffffffa0652260
[ 95.493389] R13: ffffffffa06522e0 R14: 0000000000000001 R15: 0000000000000000
[ 95.495035] acpi_safe_halt+0x14/0x20
[ 95.496127] acpi_idle_do_entry+0x2f/0x50
[ 95.497221] acpi_idle_enter+0x7f/0xd0
[ 95.498272] cpuidle_enter_state+0x81/0x420
[ 95.499375] cpuidle_enter+0x2d/0x40
[ 95.500400] do_idle+0x1e5/0x240
[ 95.501385] cpu_startup_entry+0x29/0x30
[ 95.502422] start_secondary+0x11c/0x140
[ 95.503454] common_startup_64+0x13e/0x141
[ 95.504466] </TASK>
[ 95.505197] Modules linked in: nft_fib_inet nft_fib_ipv4
nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6
nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6
nf_defrag_ipv4 rfkill ip_set nf_tables vsock_loopback
vmw_vsock_virtio_transport_common qrtr vmw_vsock_vmci_transport vsock
sunrpc binfmt_misc pktcdvd vmw_balloon pcspkr vmw_vmci i2c_piix4 joydev
loop dm_multipath nfnetlink zram crct10dif_pclmul crc32_pclmul vmwgfx
crc32c_intel polyval_clmulni polyval_generic ghash_clmulni_intel
sha512_ssse3 sha256_ssse3 vmxnet3 sha1_ssse3 drm_ttm_helper vmw_pvscsi
ttm ata_generic pata_acpi serio_raw scsi_dh_rdac scsi_dh_emc
scsi_dh_alua ip6_tables ip_tables fuse
[ 95.516536] ---[ end trace 0000000000000000 ]---
Fixes: 6f4833383e85 ("net: vmxnet3: Fix NULL pointer dereference in vmxnet3_rq_rx_complete()")
Signed-off-by: Matthias Stocker <mstocker@barracuda.com>
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Reviewed-by: Ronak Doshi <ronak.doshi@broadcom.com>
Link: https://lore.kernel.org/r/20240531103711.101961-1-mstocker@barracuda.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the PHY is powered up after powered down most of the registers are
reset, so the PHY setup code needs to be done again. In addition the
interrupt register will need to be setup again so that link status
indication works again.
Fixes: 26dd2974c5b5 ("net: phy: micrel: Move KSZ9477 errata fixes to PHY driver")
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When the following snippet is run, lockdep will report a deadlock[1].
/* Acquire all queues dim_locks */
for (i = 0; i < vi->max_queue_pairs; i++)
mutex_lock(&vi->rq[i].dim_lock);
There's no deadlock here because the vq locks are always taken
in the same order, but lockdep can not figure it out. So refactoring
the code to alleviate the problem.
[1]
========================================================
WARNING: possible recursive locking detected
6.9.0-rc7+ #319 Not tainted
--------------------------------------------
ethtool/962 is trying to acquire lock:
but task is already holding lock:
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&vi->rq[i].dim_lock);
lock(&vi->rq[i].dim_lock);
*** DEADLOCK ***
May be due to missing lock nesting notation
3 locks held by ethtool/962:
#0: ffffffff82dbaab0 (cb_lock){++++}-{3:3}, at: genl_rcv+0x19/0x40
#1: ffffffff82dad0a8 (rtnl_mutex){+.+.}-{3:3}, at:
ethnl_default_set_doit+0xbe/0x1e0
stack backtrace:
CPU: 6 PID: 962 Comm: ethtool Not tainted 6.9.0-rc7+ #319
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x79/0xb0
check_deadlock+0x130/0x220
__lock_acquire+0x861/0x990
lock_acquire.part.0+0x72/0x1d0
? lock_acquire+0xf8/0x130
__mutex_lock+0x71/0xd50
virtnet_set_coalesce+0x151/0x190
__ethnl_set_coalesce.isra.0+0x3f8/0x4d0
ethnl_set_coalesce+0x34/0x90
ethnl_default_set_doit+0xdd/0x1e0
genl_family_rcv_msg_doit+0xdc/0x130
genl_family_rcv_msg+0x154/0x230
? __pfx_ethnl_default_set_doit+0x10/0x10
genl_rcv_msg+0x4b/0xa0
? __pfx_genl_rcv_msg+0x10/0x10
netlink_rcv_skb+0x5a/0x110
genl_rcv+0x28/0x40
netlink_unicast+0x1af/0x280
netlink_sendmsg+0x20e/0x460
__sys_sendto+0x1fe/0x210
? find_held_lock+0x2b/0x80
? do_user_addr_fault+0x3a2/0x8a0
? __lock_release+0x5e/0x160
? do_user_addr_fault+0x3a2/0x8a0
? lock_release+0x72/0x140
? do_user_addr_fault+0x3a7/0x8a0
__x64_sys_sendto+0x29/0x30
do_syscall_64+0x78/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fixes: 4d4ac2ececd3 ("virtio_net: Add a lock for per queue RX coalesce")
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20240528134116.117426-3-hengqi@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the dim worker is scheduled, if it no longer needs to issue
commands, dim may not be able to return to the working state later.
For example, the following single queue scenario:
1. The dim worker of rxq0 is scheduled, and the dim status is
changed to DIM_APPLY_NEW_PROFILE;
2. dim is disabled or parameters have not been modified;
3. virtnet_rx_dim_work exits directly;
Then, even if net_dim is invoked again, it cannot work because the
state is not restored to DIM_START_MEASURE.
Fixes: 6208799553a8 ("virtio-net: support rx netdim")
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240528134116.117426-2-hengqi@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Refactored the handling of control_buf to be within the cvq_lock
critical section, mitigating race conditions between reading device
responses and new command submissions.
Fixes: 6f45ab3e0409 ("virtio_net: Add a lock for the command VQ.")
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Reviewed-by: Hariprasad Kelam <hkelam@marvell.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240530034143.19579-1-hengqi@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since commit 0a44dfc07074 ("wifi: mac80211: simplify non-chanctx
drivers") ieee80211_hw_config() is no longer called with changed = ~0.
rtlwifi relied on ~0 in order to ignore the default retry limits of
4/7, preferring 48/48 in station mode and 7/7 in AP/IBSS.
RTL8192DU has a lot of packet loss with the default limits from
mac80211. Fix it by ignoring IEEE80211_CONF_CHANGE_RETRY_LIMITS
completely, because it's the simplest solution.
Link: https://lore.kernel.org/linux-wireless/cedd13d7691f4692b2a2fa5a24d44a22@realtek.com/
Cc: stable@vger.kernel.org # 6.9.x
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/1fabb8e4-adf3-47ae-8462-8aea963bc2a5@gmail.com
|
|
Here's another one I missed during the initial conversion,
fix that.
Cc: stable@vger.kernel.org
Reported-by: Rene Petersen <renepetersen@posteo.de>
Fixes: 0a44dfc07074 ("wifi: mac80211: simplify non-chanctx drivers")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218895
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240528142308.3f7db1821e68.I531135d7ad76331a50244d6d5288e14aa9668390@changeid
|
|
Commit f236464f1db7 ("wifi: wilc1000: convert list management to RCU")
attempted to convert SRCU to RCU usage, assuming it was not really needed.
The runtime issues that arose after merging it showed that there are code
paths involving sleeping functions, and removing those would need some
heavier driver rework.
Add some documentation about SRCU need to make sure that any future
developer do not miss some use cases if tempted to convert back again to
RCU.
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240528-wilc_revert_srcu_to_rcu-v1-3-bce096e0798c@bootlin.com
|
|
This reverts commit 35aee01ff43d7eb6c2caa0b94e7cc6c45baeeab7
Commit 35aee01ff43d ("wifi: wilc1000: set atomic flag on kmemdup in srcu
critical section") was preparatory to the SRCU to RCU conversion done by
commit f236464f1db7 ("wifi: wilc1000: convert list management to RCU").
This conversion brought issues and so has been reverted, so the atomic flag
is not needed anymore.
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240528-wilc_revert_srcu_to_rcu-v1-2-bce096e0798c@bootlin.com
|
|
This reverts commit f236464f1db7bea80075e6e31ac70dc6eb80547f
Commit f236464f1db7 ("wifi: wilc1000: convert list management to RCU")
replaced SRCU with RCU, aiming to simplify RCU usage in the driver. No
documentation or commit history hinted about why SRCU has been preferred
in original design, so it has been assumed to be safe to do this
conversion.
Unfortunately, some static analyzers raised warnings, confirmed by runtime
checker, not long after the merge. At least three different issues arose
when switching to RCU:
- wilc_wlan_txq_filter_dup_tcp_ack is executed in a RCU read critical
section yet calls wait_for_completion_timeout
- wilc_wfi_init_mon_interface calls kmalloc and register_netdevice while
manipulating a vif retrieved from vif list
- set_channel sends command to chip (and so, also waits for a completion)
while holding a vif retrieved from vif list (so, in RCU read critical
section)
Some of those issues are not trivial to fix and would need bigger driver
rework. Fix those issues by reverting the SRCU to RCU conversion commit
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-wireless/3b46ec7c-baee-49fd-b760-3bc12fb12eaf@moroto.mountain/
Fixes: f236464f1db7 ("wifi: wilc1000: convert list management to RCU")
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240528-wilc_revert_srcu_to_rcu-v1-1-bce096e0798c@bootlin.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath
Merge ath-current from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
ath.git fixes for 6.10. Two fixes for user reported regressions in
ath11k. One dependency fix and one error path fix.
|
|
Raw packet from PF_PACKET socket ontop of an IPv6-backed ipvlan device will
hit WARN_ON_ONCE() in sk_mc_loop() through sch_direct_xmit() path.
WARNING: CPU: 2 PID: 0 at net/core/sock.c:775 sk_mc_loop+0x2d/0x70
Modules linked in: sch_netem ipvlan rfkill cirrus drm_shmem_helper sg drm_kms_helper
CPU: 2 PID: 0 Comm: swapper/2 Kdump: loaded Not tainted 6.9.0+ #279
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
RIP: 0010:sk_mc_loop+0x2d/0x70
Code: fa 0f 1f 44 00 00 65 0f b7 15 f7 96 a3 4f 31 c0 66 85 d2 75 26 48 85 ff 74 1c
RSP: 0018:ffffa9584015cd78 EFLAGS: 00010212
RAX: 0000000000000011 RBX: ffff91e585793e00 RCX: 0000000002c6a001
RDX: 0000000000000000 RSI: 0000000000000040 RDI: ffff91e589c0f000
RBP: ffff91e5855bd100 R08: 0000000000000000 R09: 3d00545216f43d00
R10: ffff91e584fdcc50 R11: 00000060dd8616f4 R12: ffff91e58132d000
R13: ffff91e584fdcc68 R14: ffff91e5869ce800 R15: ffff91e589c0f000
FS: 0000000000000000(0000) GS:ffff91e898100000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f788f7c44c0 CR3: 0000000008e1a000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<IRQ>
? __warn (kernel/panic.c:693)
? sk_mc_loop (net/core/sock.c:760)
? report_bug (lib/bug.c:201 lib/bug.c:219)
? handle_bug (arch/x86/kernel/traps.c:239)
? exc_invalid_op (arch/x86/kernel/traps.c:260 (discriminator 1))
? asm_exc_invalid_op (./arch/x86/include/asm/idtentry.h:621)
? sk_mc_loop (net/core/sock.c:760)
ip6_finish_output2 (net/ipv6/ip6_output.c:83 (discriminator 1))
? nf_hook_slow (net/netfilter/core.c:626)
ip6_finish_output (net/ipv6/ip6_output.c:222)
? __pfx_ip6_finish_output (net/ipv6/ip6_output.c:215)
ipvlan_xmit_mode_l3 (drivers/net/ipvlan/ipvlan_core.c:602) ipvlan
ipvlan_start_xmit (drivers/net/ipvlan/ipvlan_main.c:226) ipvlan
dev_hard_start_xmit (net/core/dev.c:3594)
sch_direct_xmit (net/sched/sch_generic.c:343)
__qdisc_run (net/sched/sch_generic.c:416)
net_tx_action (net/core/dev.c:5286)
handle_softirqs (kernel/softirq.c:555)
__irq_exit_rcu (kernel/softirq.c:589)
sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1043)
The warning triggers as this:
packet_sendmsg
packet_snd //skb->sk is packet sk
__dev_queue_xmit
__dev_xmit_skb //q->enqueue is not NULL
__qdisc_run
sch_direct_xmit
dev_hard_start_xmit
ipvlan_start_xmit
ipvlan_xmit_mode_l3 //l3 mode
ipvlan_process_outbound //vepa flag
ipvlan_process_v6_outbound
ip6_local_out
__ip6_finish_output
ip6_finish_output2 //multicast packet
sk_mc_loop //sk->sk_family is AF_PACKET
Call ip{6}_local_out() with NULL sk in ipvlan as other tunnels to fix this.
Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.")
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240529095633.613103-1-yuehaibing@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The driver overrides the NUMA node id of the device regardless of
whether it knows its correct value (often setting it to -1 even though
the node id is advertised in 'struct device'). This can lead to
suboptimal configurations.
This patch fixes this behavior and makes the shared memory allocation
functions use the NUMA node id advertised by the underlying device.
Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Link: https://lore.kernel.org/r/20240528170912.1204417-1-shayagr@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On module load, the ice driver checks for the lack of a specific PF
capability to determine if it should reduce the number of devlink params
to register. One situation when this test returns true is when the
driver loads in safe mode. The same check is not present on the unload
path when devlink params are unregistered. This results in the driver
triggering a WARN_ON in the kernel devlink code.
The current check and code path uses a reduction in the number of elements
reported in the list of params. This is fragile and not good for future
maintaining.
Change the parameters to be held in two lists, one always registered and
one dependent on the check.
Add a symmetrical check in the unload path so that the correct parameters
are unregistered as well.
Fixes: 109eb2917284 ("ice: Add tx_scheduling_layers devlink param")
CC: Lukasz Czapnik <lukasz.czapnik@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240528-net-2024-05-28-intel-net-fixes-v1-8-dc8593d2bbc6@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 24407a01e57c ("ice: Add 200G speed/phy type use") added support
for 200G PHY speeds, but did not include the mapping of 200G PHY types
to link speed. As a result the driver is returning UNKNOWN link speed
when setting 200G ethtool advertised link modes.
To fix this add 200G PHY types to link speed mapping to
ice_get_link_speed_based_on_phy_type().
Fixes: 24407a01e57c ("ice: Add 200G speed/phy type use")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240528-net-2024-05-28-intel-net-fixes-v1-5-dc8593d2bbc6@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When EEH events occurs, the callback functions in the i40e, which are
managed by the EEH driver, will completely suspend and resume all IO
operations.
- In the PCI error detected callback, replaced i40e_prep_for_reset()
with i40e_io_suspend(). The change is to fully suspend all I/O
operations
- In the PCI error slot reset callback, replaced pci_enable_device_mem()
with pci_enable_device(). This change enables both I/O and memory of
the device.
- In the PCI error resume callback, replaced i40e_handle_reset_warning()
with i40e_io_resume(). This change allows the system to resume I/O
operations
Fixes: a5f3d2c17b07 ("powerpc/pseries/pci: Add MSI domains")
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Robert Thomas <rob.thomas@ibm.com>
Signed-off-by: Thinh Tran <thinhtr@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240528-net-2024-05-28-intel-net-fixes-v1-3-dc8593d2bbc6@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Two new functions, i40e_io_suspend() and i40e_io_resume(), have been
introduced. These functions were factored out from the existing
i40e_suspend() and i40e_resume() respectively. This factoring was
done due to concerns about the logic of the I40E_SUSPENSED state, which
caused the device to be unable to recover. The functions are now used
in the EEH handling for device suspend/resume callbacks.
The function i40e_enable_mc_magic_wake() has been moved ahead of
i40e_io_suspend() to ensure it is declared before being used.
Tested-by: Robert Thomas <rob.thomas@ibm.com>
Signed-off-by: Thinh Tran <thinhtr@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240528-net-2024-05-28-intel-net-fixes-v1-2-dc8593d2bbc6@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The commit 861e8086029e ("e1000e: move force SMBUS from enable ulp
function to avoid PHY loss issue") introduces a regression on
PCH_MTP_I219_LM18 (PCIID: 0x8086550A). Without the referred commit, the
ethernet works well after suspend and resume, but after applying the
commit, the ethernet couldn't work anymore after the resume and the
dmesg shows that the NIC link changes to 10Mbps (1000Mbps originally):
[ 43.305084] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 10 Mbps Full Duplex, Flow Control: Rx/Tx
Without the commit, the force SMBUS code will not be executed if
"return 0" or "goto out" is executed in the enable_ulp(), and in my
case, the "goto out" is executed since FWSM_FW_VALID is set. But after
applying the commit, the force SMBUS code will be ran unconditionally.
Here move the force SMBUS code back to enable_ulp() and put it
immediately ahead of hw->phy.ops.release(hw), this could allow the
longest settling time as possible for interface in this function and
doesn't change the original code logic.
The issue was found on a Lenovo laptop with the ethernet hw as below:
00:1f.6 Ethernet controller [0200]: Intel Corporation Device [8086:550a]
(rev 20).
And this patch is verified (cable plug and unplug, system suspend
and resume) on Lenovo laptops with ethernet hw: [8086:550a],
[8086:550b], [8086:15bb], [8086:15be], [8086:1a1f], [8086:1a1c] and
[8086:0dc7].
Fixes: 861e8086029e ("e1000e: move force SMBUS from enable ulp function to avoid PHY loss issue")
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Acked-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240528-net-2024-05-28-intel-net-fixes-v1-1-dc8593d2bbc6@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
Aleksandr Mishin
Michael Chan
Ziwei Xiao
Taehee Yoo
Sasha Neftin
Xiaolei Wang
Joshua Washington
Gal Pressman
Andy Shevchenko
David Wei
Sagar Cheluvegowda
Jie Wang
Yonglong Liu
Csókás, Bence
Larysa Zaremba
Jacob Keller
Shay Drory
Moshe Shemesh
Frank Wunderlich
Daniel Borkmann
Tristram Ha
Subbaraya Sundeep
Jakub Kicinski
Matthias Stocker
Heng Qi
Bitterblue Smith
Johannes Berg
Alexis Lothoré
Kalle Valo
Yue Haibing
Shay Agroskin
Dave Ertman
Paul Greenwalt
Thinh Tran
Hui Wang
