| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"I'm actually surprised this time. There aren't any new Qualcomm SoC
clk drivers. And there's zero diff in the core clk framework.
Instead we have new clk drivers for STM and Sophgo, with
Samsung^WGoogle in third for the diffstat because they introduced HSI0
and HSI2 clk drivers for Google's GS101 SoC (high speed interface
things like PCIe, UFS, and MMC).
Beyond those big diffs there's the usual updates to various clk
drivers for incorrect parent descriptions or mising
MODULE_DEVICE_TABLE()s, etc. Nothing in particular stands out as super
interesting here.
New Drivers:
- STM32MP257 SoC clk driver
- Airoha EN7581 SoC clk driver
- Sophgo CV1800B, CV1812H and SG2000 SoC clk driver
- Loongson-2k0500 and Loongson-2k2000 SoC clk driver
- Add HSI0 and HSI2 clock controllers for Google GS101
- Add i.MX95 BLK CTL clock driver
Updates:
- Allocate clk_ops dynamically for SCMI clk driver
- Add support in qcom RCG and RCG2 for multiple configurations for
the same frequency
- Use above support for IPQ8074 NSS port 5 and 6 clocks to resolve
issues
- Fix the Qualcomm APSS IPQ5018 PLL to fix boot failures of some
boards
- Cleanups and fixes for Qualcomm Stromer PLLs
- Reduce max CPU frequency on Qualcomm APSS IPQ5018
- Fix Kconfig dependencies of Qualcomm SM8650 GPU and SC8280XP camera
clk drivers
- Make Qualcomm MSM8998 Venus clocks functional
- Cleanup downstream remnants related to DisplayPort across Qualcomm
SM8450, SM6350, SM8550, and SM8650
- Reuse the Huayra APSS register map on Qualcomm MSM8996 CBF PLL
- Use a specific Qualcomm QCS404 compatible for the otherwise generic
HFPLL
- Remove Qualcomm SM8150 CPUSS AHB clk as it is unused
- Remove an unused field in the Qualcomm RPM clk driver
- Add missing MODULE_DEVICE_TABLE to Qualcomm MSM8917 and MSM8953
global clock controller drivers
- Allow choice of manual or firmware-driven control over PLLs, needed
to fully implement CPU clock controllers on Exynos850
- Correct PLL clock IDs on ExynosAutov9
- Propagate certain clock rates to allow setting proper SPI clock
rates on Google GS101
- Mark certain Google GS101 clocks critical
- Convert old S3C64xx clock controller bindings to DT schema
- Add new PLL rate and missing mux on Rockchip rk3568
- Add missing reset line on Rockchip rk3588
- Removal of an unused field in struct rockchip_mmc_clock
- Amlogic s4/a1: add regmap maximum register for proper debugfs dump
- Amlogic s4: add MODULE_DEVICE_TABLE() on pll and periph controllers
- Amlogic pll driver: print clock name on lock error to help debug
- Amlogic vclk: finish dsi clock path support
- Amlogic license: fix occurence "GPL v2" as reported by checkpatch
- Add PM runtime support to i.MX8MP Audiomix
- Add DT schema for i.MX95 Display Master Block Control
- Convert to platform remove callback returning void for i.MX8MP
Audiomix
- Add SPI (MSIOF) and external interrupt (INTC-EX) clocks on Renesas
R-Car V4M
- Add interrupt controller (PLIC) clock and reset on Renesas RZ/Five
- Prepare power domain support for Renesas RZ/G2L family members, and
add actual support on Renesas RZ/G3S SoC
- Add thermal, serial (SCIF), and timer (CMT/TMU) clocks on Renesas
R-Car V4M
- Add additional constraints to Allwinner A64 PLL MIPI clock
- Fix autoloading sunxi-ng clocks when build as a module"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (118 commits)
clk: samsung: Don't register clkdev lookup for the fixed rate clocks
clk, reset: microchip: mpfs: fix incorrect preprocessor conditions
clk: qcom: clk-alpha-pll: fix rate setting for Stromer PLLs
clk: qcom: apss-ipq-pll: fix PLL rate for IPQ5018
clk: qcom: Fix SM_GPUCC_8650 dependencies
clk: qcom: Fix SC_CAMCC_8280XP dependencies
dt-bindings: clocks: stm32mp25: add access-controllers description
clock, reset: microchip: move all mpfs reset code to the reset subsystem
clk: samsung: gs101: drop unused HSI2 clock parent data
clk: rockchip: rk3568: Add PLL rate for 724 MHz
clk: rockchip: Remove an unused field in struct rockchip_mmc_clock
dt-bindings: clock: fixed: Define a preferred node name
clk: meson: s4: fix module autoloading
clk: samsung: gs101: mark some apm UASC and XIU clocks critical
clk: imx: imx8mp: Convert to platform remove callback returning void
clk: imx: imx8mp: Switch to RUNTIME_PM_OPS()
clk: bcm: rpi: Assign ->num before accessing ->hws
clk: bcm: dvp: Assign ->num before accessing ->hws
clk: samsung: gs101: add support for cmu_hsi2
clk: samsung: gs101: add support for cmu_hsi0
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull trusted keys updates from Jarkko Sakkinen:
"This contains a new key type for the Data Co-Processor (DCP), which is
an IP core built into many NXP SoCs such as i.mx6ull"
* tag 'keys-trusted-next-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
docs: trusted-encrypted: add DCP as new trust source
docs: document DCP-backed trusted keys kernel params
MAINTAINERS: add entry for DCP-based trusted keys
KEYS: trusted: Introduce NXP DCP-backed trusted keys
KEYS: trusted: improve scalability of trust source config
crypto: mxs-dcp: Add support for hardware-bound keys
|
|
DCP (Data Co-Processor) is able to derive private keys for a fused
random seed, which can be referenced by handle but not accessed by
the CPU. Similarly, DCP is able to store arbitrary keys in four
dedicated key slots located in its secure memory area (internal SRAM).
These keys can be used to perform AES encryption.
Expose these derived keys and key slots through the crypto API via their
handle. The main purpose is to add DCP-backed trusted keys. Other
use cases are possible too (see similar existing paes implementations),
but these should carefully be evaluated as e.g. enabling AF_ALG will
give userspace full access to use keys. In scenarios with untrustworthy
userspace, this will enable en-/decryption oracles.
Co-developed-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Richard Weinberger <richard@nod.at>
Co-developed-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
Signed-off-by: David Gstir <david@sigma-star.at>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
While moving all the reset code in the PolarFire SoC clock driver to the
reset subsystem, I removed an `#if IS_ENABLED(RESET_CONTROLLER)` from
the driver and moved it to the header, however this was not the correct
thing to do. In the driver such a condition over-eagerly provided a
complete implementation for mpfs_reset_{read,write}() when the reset
subsystem was enabled without the PolarFire SoC reset driver, but in the
header it meant that when the subsystem was enabled and the driver was
not, no implementation for mpfs_reset_controller_register() was
provided. Fix the condition so that the stub implementation of
mpfs_reset_controller_register() is used when the reset driver is
disabled.
Fixes: 098c290a490d ("clock, reset: microchip: move all mpfs reset code to the reset subsystem")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202405082259.44DzHvaN-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202405082200.tBrEs5CZ-lkp@intel.com/
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240508-unabashed-cheese-8f645b4f69ba@spud
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Stephen and Philipp, while reviewing patches, said that all of the aux
device creation and the register read/write code could be moved to the
reset subsystem, leaving the clock driver with no implementations of
reset_* functions at all. Move them.
Suggested-by: Philipp Zabel <p.zabel@pengutronix.de>
Suggested-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240424-strangle-sharpener-34755c5e6e3e@spud
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Each RPMh VRM accelerator resource has 3 or 4 contiguous 4-byte aligned
addresses associated with it. These control voltage, enable state, mode,
and in legacy targets, voltage headroom. The current in-flight request
checking logic looks for exact address matches. Requests for different
addresses of the same RPMh resource as thus not detected as in-flight.
Add new cmd-db API cmd_db_match_resource_addr() to enhance the in-flight
request check for VRM requests by ignoring the address offset.
This ensures that only one request is allowed to be in-flight for a given
VRM resource. This is needed to avoid scenarios where request commands are
carried out by RPMh hardware out-of-order leading to LDO regulator
over-current protection triggering.
Fixes: 658628e7ef78 ("drivers: qcom: rpmh-rsc: add RPMH controller for QCOM SoCs")
Cc: stable@vger.kernel.org
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Elliot Berman <quic_eberman@quicinc.com> # sm8650-qrd
Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com>
Link: https://lore.kernel.org/r/20240215-rpmh-rsc-fixes-v4-1-9cbddfcba05b@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver subsystem updates from Greg KH:
"Here is the big set of char/misc and a number of other driver
subsystem updates for 6.9-rc1. Included in here are:
- IIO driver updates, loads of new ones and evolution of existing ones
- coresight driver updates
- const cleanups for many driver subsystems
- speakup driver additions
- platform remove callback void cleanups
- mei driver updates
- mhi driver updates
- cdx driver updates for MSI interrupt handling
- nvmem driver updates
- other smaller driver updates and cleanups, full details in the
shortlog
All of these have been in linux-next for a long time with no reported
issue, other than a build warning for the speakup driver"
The build warning hits clang and is a gcc (and C23) extension, and is
fixed up in the merge.
Link: https://lore.kernel.org/all/20240321134831.GA2762840@dev-arch.thelio-3990X/
* tag 'char-misc-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (279 commits)
binder: remove redundant variable page_addr
uio_dmem_genirq: UIO_MEM_DMA_COHERENT conversion
uio_pruss: UIO_MEM_DMA_COHERENT conversion
cnic,bnx2,bnx2x: use UIO_MEM_DMA_COHERENT
uio: introduce UIO_MEM_DMA_COHERENT type
cdx: add MSI support for CDX bus
pps: use cflags-y instead of EXTRA_CFLAGS
speakup: Add /dev/synthu device
speakup: Fix 8bit characters from direct synth
parport: sunbpp: Convert to platform remove callback returning void
parport: amiga: Convert to platform remove callback returning void
char: xillybus: Convert to platform remove callback returning void
vmw_balloon: change maintainership
MAINTAINERS: change the maintainer for hpilo driver
char: xilinx_hwicap: Fix NULL vs IS_ERR() bug
hpet: remove hpets::hp_clocksource
platform: goldfish: move the separate 'default' propery for CONFIG_GOLDFISH
char: xilinx_hwicap: drop casting to void in dev_set_drvdata
greybus: move is_gb_* functions out of greybus.h
greybus: Remove usage of the deprecated ida_simple_xx() API
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.9
This introduces the Qualcomm Programmable Boot Sequencer (PBS) driver.
The Qualcomm SMEM no longer acquires the hwspinlock during the "get"
operation, to improve the system behavior during the recovery of a
remoteproc that crashed with the hwspinlock held.
The Qualcomm Always On Subsystem (AOSS) message protocol driver gains
tracepoints, printf annotation, and a debugfs interface is introduced
for tweaking system properties during development and debugging.
The Qualcomm socinfo driver gains data for SM8475, QCM8550 and
QCS8550 platforms, and the PM2250 is renamed to PM4125.
Support for controlling the voltage regulator in SPM/SAW2 is introduced.
The gfx.lvl power-domain is dropped for SA8540P, as this resource was
incorrectly inherited from SC8280XP.
Additionally some code cleanup improvements is introduced across APR,
LLCC, SMP2P and SPM.
* tag 'qcom-drivers-for-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (23 commits)
dt-bindings: soc: qcom: qcom,saw2: add msm8226 l2 compatible
soc: qcom: spm: add support for voltage regulator
soc: qcom: spm: remove driver-internal structures from the driver API
dt-bindings: soc: qcom: qcom,saw2: define optional regulator node
dt-bindings: soc: qcom: qcom,saw2: add missing compatible strings
dt-bindings: soc: qcom: merge qcom,saw2.txt into qcom,spm.yaml
soc: qcom: llcc: Check return value on Broadcast_OR reg read
soc: qcom: socinfo: Add Soc IDs for SM8475 family
dt-bindings: arm: qcom,ids: Add IDs for SM8475 family
soc: qcom: apr: make aprbus const
dt-bindings: soc: qcom: qcom,pmic-glink: document X1E80100 compatible
soc: qcom: add QCOM PBS driver
dt-bindings: soc: qcom: Add qcom,pbs bindings
pmdomain: qcom: rpmhpd: Drop SA8540P gfx.lvl
soc: qcom: socinfo: rename PM2250 to PM4125
soc: qcom: aoss: Add tracepoints in qmp_send()
soc: qcom: socinfo: add SoC Info support for QCM8550 and QCS8550 platform
dt-bindings: arm: qcom,ids: add SoC ID for QCM8550 and QCS8550
soc: qcom: aoss: Add debugfs interface for sending messages
soc: qcom: smem: remove hwspinlock from item get routine
...
Link: https://lore.kernel.org/r/20240225030612.480241-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The xlate callbacks are supposed to translate of_phandle_args to proper
provider without modifying the of_phandle_args. Make the argument
pointer to const for code safety and readability.
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Thierry Reding <treding@nvidia.com> # Tegra
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Alim Akhtar <alim.akhtar@samsung.com> # Samsung
Link: https://lore.kernel.org/r/20240220072213.35779-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Move internal SPM driver structures to the driver itself, removing them
from the public API. The CPUidle driver doesn't use them at all.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240102-saw2-spm-regulator-v7-4-0472ec237f49@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add support for Tegra241 which use ACPI boot.
Signed-off-by: Kartik <kkartik@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
These TEGRA_IO_RAIL_... functions and constants have been deprecated in
commit 21b499105178 ("soc/tegra: pmc: Add I/O pad voltage support") in
2016-11.
There seems to be no users since kernel 4.16.
Remove them now.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
It seems, the only actual mentions of PM2250 can be found are related to
the Qualcomm RB1 platform. However even RB1 schematics use PM4125 as a
PMIC name. Rename PM2250 to PM4125 to follow the documentation.
Fixes: 082f9bc60f33 ("soc: qcom: spmi-pmic: add more PMIC SUBTYPE IDs")
Fixes: 112d96fd2927 ("soc: qcom: socinfo: Add some PMICs")
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240128-pm2250-pm4125-rename-v2-1-d51987e9f83a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull mfd updates from Lee Jones:
"New Device Support:
- Add support for Qualcomm PM8937 PMIC to QCOM SPMI PMIC
Fix-ups:
- Use/convert to new/better APIs/helpers/MACROs instead of
hand-rolling implementations
- Device Tree binding adaptions/conversions/creation
- Improve error handling; return proper error values, simplify,
avoid duplicates, etc
- Continue work to remove superfluous platform .remove() call-backs
- Move some exported symbols into private namespaces
- Clean-up and staticify PM related operations
- Trivial; spelling, whitespace, clean-ups, etc
- Fix include lists; alphabetise, remove unused, explicitly add used
Bug Fixes:
- Use PLATFORM_DEVID_AUTO to ensure multiple duplicate devices can
co-exist
- Ensure debugfs register view is correctly presented
- Fix ordering and value issues in current use of
clk_register_fractional_divider()
- Repair Kconfig based dependency lists"
* tag 'mfd-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (50 commits)
mfd: ti_am335x_tscadc: Fix TI SoC dependencies
dt-bindings: mfd: sprd: Add support for UMS9620
mfd: ab8500-sysctrl: Drop ancient charger
mfd: intel-lpss: Fix the fractional clock divider flags
mfd: tps6594: Add null pointer check to tps6594_device_init()
dt-bindings: mfd: pm8008: Clean up example node names
dt-bindings: mfd: hisilicon,hi6421-spmi-pmic: Clean up example
dt-bindings: mfd: hisilicon,hi6421-spmi-pmic: Fix regulator binding
dt-bindings: mfd: hisilicon,hi6421-spmi-pmic: Fix up binding reference
mfd: da9062: Simplify obtaining I2C match data
mfd: syscon: Fix null pointer dereference in of_syscon_register()
mfd: intel-lpss: Don't fail probe on success of pci_alloc_irq_vectors()
mfd: twl6030-irq: Revert to use of_match_device()
mfd: cs42l43: Correct order of include files to be alphabetical
mfd: cs42l43: Correct SoundWire port list
mfd: Fix a few spelling mistakes in PMIC header file comments
mfd: intel-lpss: Provide Intel LPSS PM ops structure
mfd: intel-lpss: Move exported symbols to INTEL_LPSS namespace
mfd: intel-lpss: Adjust header inclusions
mfd: intel-lpss: Use device_get_match_data()
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into soc/drivers
Memory controller drivers for v6.8
Few improvements for Tegra Memory Controller: Override the SID
programming in the device, if firmware or bootloader left it in bypass
mode, e.g. after resuming from suspend. Skip prorgamming the SID, if
given Memory Controller client does not support it.
* tag 'memory-controller-drv-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
memory: tegra: Protect SID override call under CONFIG_IOMMU_API
memory: tegra: Skip SID programming if SID registers aren't set
memory: tegra: Add SID override programming for MC clients
Link: https://lore.kernel.org/r/20231213061523.4803-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/drivers
RISC-V SoC drivers for v6.8
There's only one set of changes here, the addition of "Auto Update"
support for PolarFire SoC. Auto Update is one of the ways that the FPGA
bitstream can be updated, and the only one suitable for use from Linux
as it does not immediately initiate a reboot when started.
The driver was not accepted in the FPGA manager subsystem as the update
only occurs after a reboot and makes no use of the FPGA manager
framework.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-soc-drivers-for-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
MAINTAINERS: add auto-update driver to mpfs entry
firmware: microchip: Replace of_device.h with explicit include
firmware: microchip: add PolarFire SoC Auto Update support
soc: microchip: mpfs: add auto-update subdev to system controller
soc: microchip: mpfs: print service status in warning message
soc: microchip: mpfs: enable access to the system controller's flash
dt-bindings: soc: microchip: add a property for system controller flash
firmware_loader: Expand Firmware upload error codes with firmware invalid error
Link: https://lore.kernel.org/r/20231221-droop-unblock-81e4fe14acee@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Introduce qmc_chan_{get,set}_ts_info() function to allow timeslots
modification at runtime.
The modification is provided using qmc_chan_set_ts_info() and will be
applied on next qmc_chan_start().
qmc_chan_set_ts_info() must be called with the channel rx and/or tx
stopped.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20231205152116.122512-18-herve.codina@bootlin.com
|
|
QMC child devices support is needed to avoid orphan DT nodes that use a
simple DT phandle to reference a QMC channel.
Allow to instantiate child devices and also extend the API to get the
qmc_chan using a child device.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20231205152116.122512-7-herve.codina@bootlin.com
|
|
In HDLC mode, some status flags related to the data read transfer can be
set by the hardware and need to be known by a QMC consumer for further
analysis.
Extend the API in order to provide these transfer status flags at the
read complete() call.
In TRANSPARENT mode, these flags have no meaning. Keep only one read
complete() API and update the consumers working in transparent mode.
In this case, the newly introduced flags parameter is simply unused.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20231205152116.122512-5-herve.codina@bootlin.com
|
|
Add the subtype and compatible strings for PM8937.
The PM8937 is found in various SoCs, including MSM8917, MSM8937,
MSM8940 and APQ variants.
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Dang Huynh <danct12@riseup.net>
Link: https://lore.kernel.org/r/20231121-pm8937-v2-1-b0171ab62075@riseup.net
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The system controller has a flash that contains images used to reprogram
the FPGA using IAP (In-Application Programming).
Introduce a function that allows a driver with a reference to the system
controller to get one to a flash device attached to it.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
For some devices the bootloader/firmware may set up the device in
bypass. Memory clients like display needs kernel to program SID after
resume because bootloader/firmware programs the SID of display device to
bypass. In order to make sure that kernel IOMMU mappings for these
devices work after resume, add SID override programming support for all
memory clients on memory controller resume.
This partially reverts 'commit ef86b2c2807f ("memory: tegra: Remove
clients SID override programming")'
Signed-off-by: Ashish Mhetre <amhetre@nvidia.com>
Link: https://lore.kernel.org/r/20231107112713.21399-1-amhetre@nvidia.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
"Core changes:
- Make default-domains mandatory for all IOMMU drivers
- Remove group refcounting
- Add generic_single_device_group() helper and consolidate drivers
- Cleanup map/unmap ops
- Scaling improvements for the IOVA rcache depot
- Convert dart & iommufd to the new domain_alloc_paging()
ARM-SMMU:
- Device-tree binding update:
- Add qcom,sm7150-smmu-v2 for Adreno on SM7150 SoC
- SMMUv2:
- Support for Qualcomm SDM670 (MDSS) and SM7150 SoCs
- SMMUv3:
- Large refactoring of the context descriptor code to move the CD
table into the master, paving the way for '->set_dev_pasid()'
support on non-SVA domains
- Minor cleanups to the SVA code
Intel VT-d:
- Enable debugfs to dump domain attached to a pasid
- Remove an unnecessary inline function
AMD IOMMU:
- Initial patches for SVA support (not complete yet)
S390 IOMMU:
- DMA-API conversion and optimized IOTLB flushing
And some smaller fixes and improvements"
* tag 'iommu-updates-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (102 commits)
iommu/dart: Remove the force_bypass variable
iommu/dart: Call apple_dart_finalize_domain() as part of alloc_paging()
iommu/dart: Convert to domain_alloc_paging()
iommu/dart: Move the blocked domain support to a global static
iommu/dart: Use static global identity domains
iommufd: Convert to alloc_domain_paging()
iommu/vt-d: Use ops->blocked_domain
iommu/vt-d: Update the definition of the blocking domain
iommu: Move IOMMU_DOMAIN_BLOCKED global statics to ops->blocked_domain
Revert "iommu/vt-d: Remove unused function"
iommu/amd: Remove DMA_FQ type from domain allocation path
iommu: change iommu_map_sgtable to return signed values
iommu/virtio: Add __counted_by for struct viommu_request and use struct_size()
iommu/vt-d: debugfs: Support dumping a specified page table
iommu/vt-d: debugfs: Create/remove debugfs file per {device, pasid}
iommu/vt-d: debugfs: Dump entry pointing to huge page
iommu/vt-d: Remove unused function
iommu/arm-smmu-v3-sva: Remove bond refcount
iommu/arm-smmu-v3-sva: Remove unused iommu_sva handle
iommu/arm-smmu-v3: Rename cdcfg to cd_table
...
|
|
Pull documentation updates from Jonathan Corbet:
"The number of commits for documentation is not huge this time around,
but there are some significant changes nonetheless:
- Some more Spanish-language and Chinese translations
- The much-discussed documentation of the confidential-computing
threat model
- Powerpc and RISCV documentation move under Documentation/arch -
these complete this particular bit of documentation churn
- A large traditional-Chinese documentation update
- A new document on backporting and conflict resolution
- Some kernel-doc and Sphinx fixes
Plus the usual smattering of smaller updates and typo fixes"
* tag 'docs-6.7' of git://git.lwn.net/linux: (40 commits)
scripts/kernel-doc: Fix the regex for matching -Werror flag
docs: backporting: address feedback
Documentation: driver-api: pps: Update PPS generator documentation
speakup: Document USB support
doc: blk-ioprio: Bring the doc in line with the implementation
docs: usb: fix reference to nonexistent file in UVC Gadget
docs: doc-guide: mention 'make refcheckdocs'
Documentation: fix typo in dynamic-debug howto
scripts/kernel-doc: match -Werror flag strictly
Documentation/sphinx: Remove the repeated word "the" in comments.
docs: sparse: add SPDX-License-Identifier
docs/zh_CN: Add subsystem-apis Chinese translation
docs/zh_TW: update contents for zh_TW
docs: submitting-patches: encourage direct notifications to commenters
docs: add backporting and conflict resolution document
docs: move riscv under arch
docs: update link to powerpc/vmemmap_dedup.rst
mm/memory-hotplug: fix typo in documentation
docs: move powerpc under arch
PCI: Update the devres documentation regarding to pcim_*()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"The highlights for the driver support this time are
- Qualcomm platforms gain support for the Qualcomm Secure Execution
Environment firmware interface to access EFI variables on certain
devices, and new features for multiple platform and firmware
drivers.
- Arm FF-A firmware support gains support for v1.1 specification
features, in particular notification and memory transaction
descriptor changes.
- SCMI firmware support now support v3.2 features for clock and DVFS
configuration and a new transport for Qualcomm platforms.
- Minor cleanups and bugfixes are added to pretty much all the active
platforms: qualcomm, broadcom, dove, ti-k3, rockchip, sifive,
amlogic, atmel, tegra, aspeed, vexpress, mediatek, samsung and
more.
In particular, this contains portions of the treewide conversion to
use __counted_by annotations and the device_get_match_data helper"
* tag 'soc-drivers-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (156 commits)
soc: qcom: pmic_glink_altmode: Print return value on error
firmware: qcom: scm: remove unneeded 'extern' specifiers
firmware: qcom: scm: add a missing forward declaration for struct device
firmware: qcom: move Qualcomm code into its own directory
soc: samsung: exynos-chipid: Convert to platform remove callback returning void
soc: qcom: apr: Add __counted_by for struct apr_rx_buf and use struct_size()
soc: qcom: pmic_glink: fix connector type to be DisplayPort
soc: ti: k3-socinfo: Avoid overriding return value
soc: ti: k3-socinfo: Fix typo in bitfield documentation
soc: ti: knav_qmss_queue: Use device_get_match_data()
firmware: ti_sci: Use device_get_match_data()
firmware: qcom: qseecom: add missing include guards
soc/pxa: ssp: Convert to platform remove callback returning void
soc/mediatek: mtk-mmsys: Convert to platform remove callback returning void
soc/mediatek: mtk-devapc: Convert to platform remove callback returning void
soc/loongson: loongson2_guts: Convert to platform remove callback returning void
soc/litex: litex_soc_ctrl: Convert to platform remove callback returning void
soc/ixp4xx: ixp4xx-qmgr: Convert to platform remove callback returning void
soc/ixp4xx: ixp4xx-npe: Convert to platform remove callback returning void
soc/hisilicon: kunpeng_hccs: Convert to platform remove callback returning void
...
|
|
Add support for the RK3588 to the driver. The RK3588 has four DDR
channels with a register stride of 0x4000 between the channel
registers, also it has a DDRMON_CTRL register per channel.
Link: https://lore.kernel.org/all/20231018061714.3553817-20-s.hauer@pengutronix.de/
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
The DFI is a unit which is suitable for measuring DDR utilization, but
so far it could only be used as an event driver for the DDR frequency
scaling driver. This adds perf support to the DFI driver.
Usage with the 'perf' tool can look like:
perf stat -a -e rockchip_ddr/cycles/,\
rockchip_ddr/read-bytes/,\
rockchip_ddr/write-bytes/,\
rockchip_ddr/bytes/ sleep 1
Performance counter stats for 'system wide':
1582524826 rockchip_ddr/cycles/
1802.25 MB rockchip_ddr/read-bytes/
1793.72 MB rockchip_ddr/write-bytes/
3595.90 MB rockchip_ddr/bytes/
1.014369709 seconds time elapsed
perf support has been tested on a RK3568 and a RK3399, the latter with
dual channel DDR.
Link: https://lore.kernel.org/all/20231019064819.3496740-1-s.hauer@pengutronix.de/
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
[cw00.choi: Fix typo from 'write_acccess' to 'write_access']
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
In the DFI driver LPDDR4X can be handled in the same way as LPDDR4. Add
the missing case.
Link: https://lore.kernel.org/all/20231018061714.3553817-13-s.hauer@pengutronix.de/
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
This adds RK3568 support to the DFI driver. Only iniitialization
differs from the currently supported RK3399.
Link: https://lore.kernel.org/all/20231018061714.3553817-11-s.hauer@pengutronix.de/
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
The DDRTYPE defines are named to be RK3399 specific, but they can be
used for other Rockchip SoCs as well, so replace the RK3399_PMUGRF_
prefix with ROCKCHIP_. They are defined in a SoC specific header
file, so when generalizing the prefix also move the new defines to
a SoC agnostic header file. While at it use GENMASK to define the
DDRTYPE bitfield and give it a name including the full register name.
Link: https://lore.kernel.org/all/20231018061714.3553817-9-s.hauer@pengutronix.de/
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
Add suspend hook and a 'suspended' field in the 'struct tegra_bpmp'
to mark if BPMP is suspended. Also, add a 'flags' field in the
'struct tegra_bpmp_message' whose 'TEGRA_BPMP_MESSAGE_RESET' bit can be
set from the Tegra MC driver to signal that the reset of BPMP IPC
channels is required before sending MRQ to the BPMP FW. Together both
the fields allow us to handle any requests that might be sent too soon
as they can cause hang during system resume.
One case where we see BPMP requests being sent before the BPMP driver
has resumed is the memory bandwidth requests which are triggered by
onlining the CPUs during system resume. The CPUs are onlined before the
BPMP has resumed and we need to reset the BPMP IPC channels to handle
these requests.
The additional check for 'flags' is done to avoid any un-intended BPMP
IPC reset if the tegra_bpmp_transfer*() API gets called during suspend
sequence after the BPMP driver is suspended.
Fixes: f41e1442ac5b ("cpufreq: tegra194: add OPP support and set bandwidth")
Co-developed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
successfully, not 'succesfully'
Signed-off-by: Deming Wang <wangdeming@inspur.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
and fix all in-tree references.
Architecture-specific documentation is being moved into Documentation/arch/
as a way of cleaning up the top-level documentation directory and making
the docs hierarchy more closely match the source hierarchy.
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20230826165737.2101199-1-costa.shul@redhat.com
|
|
Thierry says this is not used anymore, and doesn't think it makes sense as
an iommu driver. The HW it supports is about 10 years old now and newer HW
uses different IOMMU drivers.
As this is the only driver with a GART approach, and it doesn't really
meet the driver expectations from the IOMMU core, let's just remove it
so we don't have to think about how to make it fit in.
It has a number of identified problems:
- The assignment of iommu_groups doesn't match the HW behavior
- It claims to have an UNMANAGED domain but it is really an IDENTITY
domain with a translation aperture. This is inconsistent with the core
expectation for security sensitive operations
- It doesn't implement a SW page table under struct iommu_domain so
* It can't accept a map until the domain is attached
* It forgets about all maps after the domain is detached
* It doesn't clear the HW of maps once the domain is detached
(made worse by having the wrong groups)
Cc: Thierry Reding <treding@nvidia.com>
Cc: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/6-v8-81230027b2fa+9d-iommu_all_defdom_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
"Core changes:
- Consolidate probe_device path
- Make the PCI-SAC IOVA allocation trick PCI-only
AMD IOMMU:
- Consolidate PPR log handling
- Interrupt handling improvements
- Refcount fixes for amd_iommu_v2 driver
Intel VT-d driver:
- Enable idxd device DMA with pasid through iommu dma ops
- Lift RESV_DIRECT check from VT-d driver to core
- Miscellaneous cleanups and fixes
ARM-SMMU drivers:
- Device-tree binding updates:
- Add additional compatible strings for Qualcomm SoCs
- Allow ASIDs to be configured in the DT to work around Qualcomm's
broken hypervisor
- Fix clocks for Qualcomm's MSM8998 SoC
- SMMUv2:
- Support for Qualcomm's legacy firmware implementation featured
on at least MSM8956 and MSM8976
- Match compatible strings for Qualcomm SM6350 and SM6375 SoC
variants
- SMMUv3:
- Use 'ida' instead of a bitmap for VMID allocation
- Rockchip IOMMU:
- Lift page-table allocation restrictions on newer hardware
- Mediatek IOMMU:
- Add MT8188 IOMMU Support
- Renesas IOMMU:
- Allow PCIe devices
.. and the usual set of cleanups an smaller fixes"
* tag 'iommu-updates-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (64 commits)
iommu: Explicitly include correct DT includes
iommu/amd: Remove unused declarations
iommu/arm-smmu-qcom: Add SM6375 SMMUv2
iommu/arm-smmu-qcom: Add SM6350 DPU compatible
iommu/arm-smmu-qcom: Add SM6375 DPU compatible
iommu/arm-smmu-qcom: Sort the compatible list alphabetically
dt-bindings: arm-smmu: Fix MSM8998 clocks description
iommu/vt-d: Remove unused extern declaration dmar_parse_dev_scope()
iommu/vt-d: Fix to convert mm pfn to dma pfn
iommu/vt-d: Fix to flush cache of PASID directory table
iommu/vt-d: Remove rmrr check in domain attaching device path
iommu: Prevent RESV_DIRECT devices from blocking domains
dmaengine/idxd: Re-enable kernel workqueue under DMA API
iommu/vt-d: Add set_dev_pasid callback for dma domain
iommu/vt-d: Prepare for set_dev_pasid callback
iommu/vt-d: Make prq draining code generic
iommu/vt-d: Remove pasid_mutex
iommu/vt-d: Add domain_flush_pasid_iotlb()
iommu: Move global PASID allocation from SVA to core
iommu: Generalize PASID 0 for normal DMA w/o PASID
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk subsystem updates from Stephen Boyd:
"This pull request is full of clk driver changes. In fact, there aren't
any changes to the clk framework this time around. That's probably
because everyone was on vacation (yours truly included). We did lose a
couple clk drivers this time around because nobody was using those
devices. That skews the diffstat a bit, but either way, nothing looks
out of the ordinary here. The usual suspects are chugging along adding
support for more SoCs and fixing bugs.
If I had to choose, I'd say the theme for the past few months has been
"polish". There's quite a few patches that migrate to
devm_platform_ioremap_resource() in here. And there's more than a
handful of patches that move the NR_CLKS define from the DT binding
header to the driver. There's even patches that migrate drivers to use
clk_parent_data and clk_hw to describe clk tree topology. It seems
that the spring (summer?) cleaning bug got some folks, or the
semiconductor shortage finally hit the software side.
New Drivers:
- StarFive JH7110 SoC clock drivers
- Qualcomm IPQ5018 Global Clock Controller driver
- Versa3 clk generator to support 48KHz playback/record with audio
codec on RZ/G2L SMARC EVK
Removed Drivers:
- Remove non-OF mmp clk drivers
- Remove OXNAS clk driver
Updates:
- Add __counted_by to struct clk_hw_onecell_data and struct
spmi_pmic_div_clk_cc
- Move defines for numbers of clks (NR_CLKS) from DT headers to
drivers
- Introduce kstrdup_and_replace() and use it
- Add PLL rates for Rockchip rk3568
- Add the display clock tree for Rockchip rv1126
- Add Audio Clock Generator (ADG) clocks on Renesas R-Car Gen3 and
RZ/G2 SoCs
- Convert sun9i-mmc clock to use
devm_platform_get_and_ioremap_resource()
- Fix function name in a comment in ccu_mmc_timing.c
- Parameter name correction for ccu_nkm_round_rate()
- Implement CLK_SET_RATE_PARENT for Allwinner NKM clocks, i.e.
consider alternative parent rates when determining clock rates
- Set CLK_SET_RATE_PARENT for Allwinner A64 pll-mipi
- Support finding closest (as opposed to closest but not higher)
clock rate for NM, NKM, mux and div type clocks, as use it for
Allwinner A64 pll-video0
- Prefer current parent rate if able to generate ideal clock rate for
Allwinner NKM clocks
- Clean up Qualcomm SMD RPM driver, with interconnect bus clocks
moved out to the interconnect drivers
- Fix various PM runtime bugs across many Qualcomm clk drivers
- Migrate Qualcomm MDM9615 is to parent_hw and parent_data
- Add network related resets on Qualcomm IPQ4019
- Add a couple missing USB related clocks to Qualcomm IPQ9574
- Add missing gpll0_sleep_clk_src to Qualcomm MSM8917 global clock
controller
- In the Qualcomm QDU1000 global clock controller, GDSCs, clkrefs,
and GPLL1 are added, while PCIe pipe clock, SDCC rcg ops are
corrected
- Add missing GDSCs to and correct GDSCs for the SC8280XP global
clock controller driver
- Support retention for the Qualcomm SC8280XP display clock
controller GDSCs.
- Qualcommm's SDCC apps_clk_src is marked with CLK_OPS_PARENT_ENABLE
to fix issues with missing parent clocks across sc7180, sm7150,
sm6350 and sm8250, while sm8450 is corrected to use floor ops
- Correct Qualcomm SM6350 GPU clock controller's clock supplies
- Drop unwanted clocks from the Qualcomm IPQ5332 GCC driver
- Add missing OXILICX GDSC to Qualcomm MSM8226 GCC
- Change the delay in the Qualcomm reset controller to fsleep() for
correctness
- Extend the Qualcomm SM83550 Video clock controller to support
SC8280XP
- Add graphics clock support on Renesas RZ/G2M, RZ/G2N, RZ/G2E, and
R-Car H3, M3-W, and M3-N SoCs
- Add Clocked Serial Interface (CSI) clocks on Renesas RZ/V2M
- Add PWM (MTU3) clock and reset on Renesas RZ/G2UL and RZ/Five
- Add the PDM IPC clock for i.MX93
- Add 519.75MHz frequency support for i.MX9 PLL
- Simplify the .determine_rate() implementation for i.MX GPR mux
- Make the i.MX8QXP LPCG clock use devm_platform_ioremap_resource()
- Add the audio mux clock to i.MX8
- Fix the SPLL2 MULT range for PLLv4
- Update the SPLL2 type in i.MX8ULP
- Fix the SAI4 clock on i.MX8MP
- Add silicon revision print for i.MX25 on clocks init
- Drop the return value from __mx25_clocks_init()
- Fix the clock pauses on no-op set_rate for i.MX8M composite clock
- Drop restrictions for i.MX PLL14xx and fix its max prediv value
- Drop the 393216000 and 361267200 from i.MX PLL14xx rate table to
allow glitch free switching"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (207 commits)
clk: qcom: Fix SM_GPUCC_8450 dependencies
clk: lmk04832: Support using PLL1_LD as SPI readback pin
clk: lmk04832: Don't disable vco clock on probe fail
clk: lmk04832: Set missing parent_names for output clocks
clk: mvebu: Convert to devm_platform_ioremap_resource()
clk: nuvoton: Convert to devm_platform_ioremap_resource()
clk: socfpga: agilex: Convert to devm_platform_ioremap_resource()
clk: ti: Use devm_platform_get_and_ioremap_resource()
clk: mediatek: Convert to devm_platform_ioremap_resource()
clk: hsdk-pll: Convert to devm_platform_ioremap_resource()
clk: gemini: Convert to devm_platform_ioremap_resource()
clk: fsl-sai: Convert to devm_platform_ioremap_resource()
clk: bm1880: Convert to devm_platform_ioremap_resource()
clk: axm5516: Convert to devm_platform_ioremap_resource()
clk: actions: Convert to devm_platform_ioremap_resource()
clk: cdce925: Remove redundant of_match_ptr()
clk: pxa910: Move number of clocks to driver source
clk: pxa1928: Move number of clocks to driver source
clk: pxa168: Move number of clocks to driver source
clk: mmp2: Move number of clocks to driver source
...
|
|
Pull ARM SoC cleanups from Arnd Bergmann:
"These are all minor cleanups for platform specific code in arch/arm/
and some of the associated drivers. The majority of these are work
done by Rob Herring to improve the way devicetreee header files are
handled"
* tag 'soc-arm-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (49 commits)
ARM: davinci: Drop unused includes
ARM: s5pv210: Explicitly include correct DT includes
ARM: dove: Drop unused includes
ARM: mvebu: Explicitly include correct DT includes
Documentation/process: maintainer-soc: document dtbs_check requirement for Samsung
MAINTAINER: samsung: document dtbs_check requirement for Samsung
Documentation/process: maintainer-soc: add clean platforms profile
MAINTAINERS: soc: reference maintainer profile
ARM: nspire: Remove unused header file mmio.h
ARM: nspire: Use syscon-reboot to handle restart
soc: fsl: Explicitly include correct DT includes
soc: xilinx: Explicitly include correct DT includes
soc: sunxi: Explicitly include correct DT includes
soc: rockchip: Explicitly include correct DT includes
soc: mediatek: Explicitly include correct DT includes
soc: aspeed: Explicitly include correct DT includes
firmware: Explicitly include correct DT includes
bus: Explicitly include correct DT includes
ARM: spear: Explicitly include correct DT includes
ARM: mvebu: Explicitly include correct DT includes
...
|
|
Commit 6c30384eb1de ("net: mscc: ocelot: register devlink ports")
declared but never implemented ocelot_devlink_init() and
ocelot_devlink_teardown().
Commit 2096805497e2 ("net: mscc: ocelot: automatically detect VCAP constants")
declared but never implemented ocelot_detect_vcap_constants().
Commit 403ffc2c34de ("net: mscc: ocelot: add support for preemptible traffic classes")
declared but never implemented ocelot_port_update_preemptible_tcs().
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230821130218.19096-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
'arm/smmu', 'unisoc', 'x86/vt-d', 'x86/amd' and 'core' into next
|
|
Print the imx25 silicon revision when the clocks are initialised.
Use the same mechanism as for imx27, i.e. call mx25_revision.
This function is unused at the moment.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20230802184046.153394-2-martin@kaiser.cx
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/arm
AT91 SoC updates for 6.6:
It contains:
- explicitly include correct DT includes from Rob
- one cleanup which removes unused extern declaration on atmel_tcb.h
* tag 'at91-soc-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: at91: Remove unused extern declarations
ARM: at91: Explicitly include correct DT includes
soc: microchip: Explicitly include correct DT includes
Link: https://lore.kernel.org/r/20230804044118.231478-1-claudiu.beznea@tuxon.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Prepare for MT8188. In MT8188, the register which enables IOMMU for
INFRA masters are in the secure world for security concerns, therefore we
add a SMC command for INFRA masters to enable IOMMU in ATF.
Signed-off-by: Chengci.Xu <chengci.xu@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20230602090227.7264-5-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
commit 157576d55233 ("misc: remove atmel_tclib")
left behind this.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20230725141105.26904-1-yuehaibing@huawei.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/fixes
Memory controller drivers - fixes for v6.5
Two fixes are needed for Tegra194 memory controllers caused by the same
Tegra PCI commit merged in v6.5-rc1. The Tegra PCI requires now
interconnect from the memory controller, which was set only for
Tegra234, but not for Tegra194, causing probe deferrals. Expose some
dummy interconnect provider for Tegra194, to satisfy PCI driver needs.
* tag 'memory-controller-drv-fixes-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
memory: tegra: make icc_set_bw return zero if BWMGR not supported
memory: tegra: Add dummy implementation on Tegra194
Link: https://lore.kernel.org/r/20230726084811.124038-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
With the introduction of commit 9365bf006f53 ("PCI: tegra194: Add
interconnect support in Tegra234"), the PCI driver on Tegra194 and later
requires an interconnect provider. However, a provider is currently only
exposed on Tegra234 and this causes PCI on Tegra194 to defer probe
indefinitely.
Fix this by adding a dummy implementation on Tegra194. This allows nodes
to be provided to interconnect consumers, but doesn't do any bandwidth
accounting or frequency scaling.
Fixes: 9365bf006f53 ("PCI: tegra194: Add interconnect support in Tegra234")
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Sumit Gupta <sumitg@nvidia.com>
Tested-by: Sumit Gupta <sumitg@nvidia.com>
Link: https://lore.kernel.org/r/20230629160132.768940-1-thierry.reding@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
In a future change we will need to make
ocelot_port_update_active_preemptible_tcs() call
vsc9959_tas_guard_bands_update(), but that is currently not possible,
since the ocelot switch lib does not have access to functions private to
the DSA wrapper.
Move the pointer to vsc9959_tas_guard_bands_update() from felix->info
(which is private to the DSA driver) to ocelot->ops (which is also
visible to the ocelot switch lib).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Message-ID: <20230705104422.49025-3-vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In a future commit we will have to call vsc9959_tas_guard_bands_update()
from ocelot_port_update_active_preemptible_tcs(), and that will be
impossible due to the AB/BA locking dependencies between
ocelot->tas_lock and ocelot->fwd_domain_lock.
Just like we did in commit 3ff468ef987e ("net: mscc: ocelot: remove
struct ocelot_mm_state :: lock"), the only solution is to expand the
scope of ocelot->fwd_domain_lock for it to also serialize changes made
to the Time-Aware Shaper, because those will have to result in a
recalculation of cut-through TCs, which is something that depends on the
forwarding domain.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Message-ID: <20230705104422.49025-2-vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, bpf and wireguard.
Current release - regressions:
- nvme-tcp: fix comma-related oops after sendpage changes
Current release - new code bugs:
- ptp: make max_phase_adjustment sysfs device attribute invisible
when not supported
Previous releases - regressions:
- sctp: fix potential deadlock on &net->sctp.addr_wq_lock
- mptcp:
- ensure subflow is unhashed before cleaning the backlog
- do not rely on implicit state check in mptcp_listen()
Previous releases - always broken:
- net: fix net_dev_start_xmit trace event vs skb_transport_offset()
- Bluetooth:
- fix use-bdaddr-property quirk
- L2CAP: fix multiple UaFs
- ISO: use hci_sync for setting CIG parameters
- hci_event: fix Set CIG Parameters error status handling
- hci_event: fix parsing of CIS Established Event
- MGMT: fix marking SCAN_RSP as not connectable
- wireguard: queuing: use saner cpu selection wrapping
- sched: act_ipt: various bug fixes for iptables <> TC interactions
- sched: act_pedit: add size check for TCA_PEDIT_PARMS_EX
- dsa: fixes for receiving PTP packets with 8021q and sja1105 tagging
- eth: sfc: fix null-deref in devlink port without MAE access
- eth: ibmvnic: do not reset dql stats on NON_FATAL err
Misc:
- xsk: honor SO_BINDTODEVICE on bind"
* tag 'net-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (70 commits)
nfp: clean mc addresses in application firmware when closing port
selftests: mptcp: pm_nl_ctl: fix 32-bit support
selftests: mptcp: depend on SYN_COOKIES
selftests: mptcp: userspace_pm: report errors with 'remove' tests
selftests: mptcp: userspace_pm: use correct server port
selftests: mptcp: sockopt: return error if wrong mark
selftests: mptcp: sockopt: use 'iptables-legacy' if available
selftests: mptcp: connect: fail if nft supposed to work
mptcp: do not rely on implicit state check in mptcp_listen()
mptcp: ensure subflow is unhashed before cleaning the backlog
s390/qeth: Fix vipa deletion
octeontx-af: fix hardware timestamp configuration
net: dsa: sja1105: always enable the send_meta options
net: dsa: tag_sja1105: fix MAC DA patching from meta frames
net: Replace strlcpy with strscpy
pptp: Fix fib lookup calls.
mlxsw: spectrum_router: Fix an IS_ERR() vs NULL check
net/sched: act_pedit: Add size check for TCA_PEDIT_PARMS_EX
xsk: Honor SO_BINDTODEVICE on bind
ptp: Make max_phase_adjustment sysfs device attribute invisible when not supported
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"Nothing surprising in the SoC specific drivers, with the usual
updates:
- Added or improved SoC driver support for Tegra234, Exynos4121,
RK3588, as well as multiple Mediatek and Qualcomm chips
- SCMI firmware gains support for multiple SMC/HVC transport and
version 3.2 of the protocol
- Cleanups amd minor changes for the reset controller, memory
controller, firmware and sram drivers
- Minor changes to amd/xilinx, samsung, tegra, nxp, ti, qualcomm,
amlogic and renesas SoC specific drivers"
* tag 'soc-drivers-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (118 commits)
dt-bindings: interrupt-controller: Convert Amlogic Meson GPIO interrupt controller binding
MAINTAINERS: add PHY-related files to Amlogic SoC file list
drivers: meson: secure-pwrc: always enable DMA domain
tee: optee: Use kmemdup() to replace kmalloc + memcpy
soc: qcom: geni-se: Do not bother about enable/disable of interrupts in secondary sequencer
dt-bindings: sram: qcom,imem: document qdu1000
soc: qcom: icc-bwmon: Fix MSM8998 count unit
dt-bindings: soc: qcom,rpmh-rsc: Require power-domains
soc: qcom: socinfo: Add Soc ID for IPQ5300
dt-bindings: arm: qcom,ids: add SoC ID for IPQ5300
soc: qcom: Fix a IS_ERR() vs NULL bug in probe
soc: qcom: socinfo: Add support for new fields in revision 19
soc: qcom: socinfo: Add support for new fields in revision 18
dt-bindings: firmware: scm: Add compatible for SDX75
soc: qcom: mdt_loader: Fix split image detection
dt-bindings: memory-controllers: drop unneeded quotes
soc: rockchip: dtpm: use C99 array init syntax
firmware: tegra: bpmp: Add support for DRAM MRQ GSCs
soc/tegra: pmc: Use devm_clk_notifier_register()
soc/tegra: pmc: Simplify debugfs initialization
...
|
|
In a future change, the driver will need to determine whether PTP RX
timestamping is enabled on a port (including whether traps were set up
on that port in particular) and that is currently not possible.
The driver supports different RX filters (L2, L4) and kinds of TX
timestamping (one-step, two-step) on its ports, but it saves all
configuration in a single struct hwtstamp_config that is global to the
switch. So, the latest timestamping configuration on one port
(including a request to disable timestamping) affects what gets reported
for all ports, even though the configuration itself is still individual
to each port.
The port timestamping configurations are only coupled because of the
common structure, so replace the hwtstamp_config with a mask of trapped
protocols saved per port. We also have the ptp_cmd to distinguish
between one-step and two-step PTP timestamping, so with those 2 bits of
information we can fully reconstruct a descriptive struct
hwtstamp_config for each port, during the SIOCGHWTSTAMP ioctl.
Fixes: 4e3b0468e6d7 ("net: mscc: PTP Hardware Clock (PHC) support")
Fixes: 96ca08c05838 ("net: mscc: ocelot: set up traps for PTP packets")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
Linus Torvalds
David Gstir
Conor Dooley
Maulik Shah
Arnd Bergmann
Krzysztof Kozlowski
Dmitry Baryshkov
Kartik
Christophe JAILLET
Herve Codina
Dang Huynh
Ashish Mhetre
Sascha Hauer
Sumit Gupta
Deming Wang
Costa Shulyupin
Jason Gunthorpe
Yue Haibing
Joerg Roedel
Martin Kaiser
Chengci.Xu
Thierry Reding
Vladimir Oltean
