aboutsummaryrefslogtreecommitdiff
path: root/net/wireless
AgeCommit message (Collapse)AuthorFilesLines
2024-05-29wifi: cfg80211: fix 6 GHz scan request buildingGravatar Johannes Berg 2-17/+36
The 6 GHz scan request struct allocated by cfg80211_scan_6ghz() is meant to be formed this way: [base struct][channels][ssids][6ghz_params] It is allocated with [channels] as the maximum number of channels supported by the driver in the 6 GHz band, since allocation is before knowing how many there will be. However, the inner pointers are set incorrectly: initially, the 6 GHz scan parameters pointer is set: [base struct][channels] ^ scan_6ghz_params and later the SSID pointer is set to the end of the actually _used_ channels. [base struct][channels] ^ ssids If many APs were to be discovered, and many channels used, and there were many SSIDs, then the SSIDs could overlap the 6 GHz parameters. Additionally, the request->ssids for most of the function points to the original request still (given the struct copy) but is used normally, which is confusing. Clear this up, by actually using the allocated space for 6 GHz parameters _after_ the SSIDs, and set up the SSIDs initially so they are used more clearly. Just like in nl80211.c, set them only if there actually are SSIDs though. Finally, also copy the elements (ie/ie_len) so they're part of the same request, not pointing to the old request. Co-developed-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240510113738.4190692ef4ee.I0cb19188be17a8abd029805e3373c0a7777c214c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: cfg80211: pmsr: use correct nla_get_uX functionsGravatar Lin Ma 1-4/+4
The commit 9bb7e0f24e7e ("cfg80211: add peer measurement with FTM initiator API") defines four attributes NL80211_PMSR_FTM_REQ_ATTR_ {NUM_BURSTS_EXP}/{BURST_PERIOD}/{BURST_DURATION}/{FTMS_PER_BURST} in following ways. static const struct nla_policy nl80211_pmsr_ftm_req_attr_policy[NL80211_PMSR_FTM_REQ_ATTR_MAX + 1] = { ... [NL80211_PMSR_FTM_REQ_ATTR_NUM_BURSTS_EXP] = NLA_POLICY_MAX(NLA_U8, 15), [NL80211_PMSR_FTM_REQ_ATTR_BURST_PERIOD] = { .type = NLA_U16 }, [NL80211_PMSR_FTM_REQ_ATTR_BURST_DURATION] = NLA_POLICY_MAX(NLA_U8, 15), [NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST] = NLA_POLICY_MAX(NLA_U8, 31), ... }; That is, those attributes are expected to be NLA_U8 and NLA_U16 types. However, the consumers of these attributes in `pmsr_parse_ftm` blindly all use `nla_get_u32`, which is incorrect and causes functionality issues on little-endian platforms. Hence, fix them with the correct `nla_get_u8` and `nla_get_u16` functions. Fixes: 9bb7e0f24e7e ("cfg80211: add peer measurement with FTM initiator API") Signed-off-by: Lin Ma <linma@zju.edu.cn> Link: https://msgid.link/20240521075059.47999-1-linma@zju.edu.cn Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: cfg80211: Lock wiphy in cfg80211_get_stationGravatar Remi Pommarel 1-1/+6
Wiphy should be locked before calling rdev_get_station() (see lockdep assert in ieee80211_get_station()). This fixes the following kernel NULL dereference: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000050 Mem abort info: ESR = 0x0000000096000006 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x06: level 2 translation fault Data abort info: ISV = 0, ISS = 0x00000006 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=0000000003001000 [0000000000000050] pgd=0800000002dca003, p4d=0800000002dca003, pud=08000000028e9003, pmd=0000000000000000 Internal error: Oops: 0000000096000006 [#1] SMP Modules linked in: netconsole dwc3_meson_g12a dwc3_of_simple dwc3 ip_gre gre ath10k_pci ath10k_core ath9k ath9k_common ath9k_hw ath CPU: 0 PID: 1091 Comm: kworker/u8:0 Not tainted 6.4.0-02144-g565f9a3a7911-dirty #705 Hardware name: RPT (r1) (DT) Workqueue: bat_events batadv_v_elp_throughput_metric_update pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : ath10k_sta_statistics+0x10/0x2dc [ath10k_core] lr : sta_set_sinfo+0xcc/0xbd4 sp : ffff000007b43ad0 x29: ffff000007b43ad0 x28: ffff0000071fa900 x27: ffff00000294ca98 x26: ffff000006830880 x25: ffff000006830880 x24: ffff00000294c000 x23: 0000000000000001 x22: ffff000007b43c90 x21: ffff800008898acc x20: ffff00000294c6e8 x19: ffff000007b43c90 x18: 0000000000000000 x17: 445946354d552d78 x16: 62661f7200000000 x15: 57464f445946354d x14: 0000000000000000 x13: 00000000000000e3 x12: d5f0acbcebea978e x11: 00000000000000e3 x10: 000000010048fe41 x9 : 0000000000000000 x8 : ffff000007b43d90 x7 : 000000007a1e2125 x6 : 0000000000000000 x5 : ffff0000024e0900 x4 : ffff800000a0250c x3 : ffff000007b43c90 x2 : ffff00000294ca98 x1 : ffff000006831920 x0 : 0000000000000000 Call trace: ath10k_sta_statistics+0x10/0x2dc [ath10k_core] sta_set_sinfo+0xcc/0xbd4 ieee80211_get_station+0x2c/0x44 cfg80211_get_station+0x80/0x154 batadv_v_elp_get_throughput+0x138/0x1fc batadv_v_elp_throughput_metric_update+0x1c/0xa4 process_one_work+0x1ec/0x414 worker_thread+0x70/0x46c kthread+0xdc/0xe0 ret_from_fork+0x10/0x20 Code: a9bb7bfd 910003fd a90153f3 f9411c40 (f9402814) This happens because STA has time to disconnect and reconnect before batadv_v_elp_throughput_metric_update() delayed work gets scheduled. In this situation, ath10k_sta_state() can be in the middle of resetting arsta data when the work queue get chance to be scheduled and ends up accessing it. Locking wiphy prevents that. Fixes: 7406353d43c8 ("cfg80211: implement cfg80211_get_station cfg80211 API") Signed-off-by: Remi Pommarel <repk@triplefau.lt> Reviewed-by: Nicolas Escande <nico.escande@gmail.com> Acked-by: Antonio Quartulli <a@unstable.cc> Link: https://msgid.link/983b24a6a176e0800c01aedcd74480d9b551cb13.1716046653.git.repk@triplefau.lt Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: cfg80211: fully move wiphy work to unbound workqueueGravatar Johannes Berg 2-3/+3
Previously I had moved the wiphy work to the unbound system workqueue, but missed that when it restarts and during resume it was still using the normal system workqueue. Fix that. Fixes: 91d20ab9d9ca ("wifi: cfg80211: use system_unbound_wq for wiphy work") Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240522124126.7ca959f2cbd3.I3e2a71ef445d167b84000ccf934ea245aef8d395@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: cfg80211: validate HE operation element parsingGravatar Johannes Berg 1-1/+2
Validate that the HE operation element has the correct length before parsing it. Cc: stable@vger.kernel.org Fixes: 645f3d85129d ("wifi: cfg80211: handle UHB AP and STA power type") Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240523120533.677025eb4a92.I44c091029ef113c294e8fe8b9bf871bf5dbeeb27@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-22tracing/treewide: Remove second parameter of __assign_str()Gravatar Steven Rostedt (Google) 1-1/+1
With the rework of how the __string() handles dynamic strings where it saves off the source string in field in the helper structure[1], the assignment of that value to the trace event field is stored in the helper value and does not need to be passed in again. This means that with: __string(field, mystring) Which use to be assigned with __assign_str(field, mystring), no longer needs the second parameter and it is unused. With this, __assign_str() will now only get a single parameter. There's over 700 users of __assign_str() and because coccinelle does not handle the TRACE_EVENT() macro I ended up using the following sed script: git grep -l __assign_str | while read a ; do sed -e 's/\(__assign_str([^,]*[^ ,]\) *,[^;]*/\1)/' $a > /tmp/test-file; mv /tmp/test-file $a; done I then searched for __assign_str() that did not end with ';' as those were multi line assignments that the sed script above would fail to catch. Note, the same updates will need to be done for: __assign_str_len() __assign_rel_str() __assign_rel_str_len() I tested this with both an allmodconfig and an allyesconfig (build only for both). [1] https://lore.kernel.org/linux-trace-kernel/20240222211442.634192653@goodmis.org/ Link: https://lore.kernel.org/linux-trace-kernel/20240516133454.681ba6a0@rorschach.local.home Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Christian König <christian.koenig@amd.com> for the amdgpu parts. Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #for Acked-by: Rafael J. Wysocki <rafael@kernel.org> # for thermal Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Darrick J. Wong <djwong@kernel.org> # xfs Tested-by: Guenter Roeck <linux@roeck-us.net>
2024-05-18Merge tag 'kbuild-v6.10' of ↵Gravatar Linus Torvalds 1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Avoid 'constexpr', which is a keyword in C23 - Allow 'dtbs_check' and 'dt_compatible_check' run independently of 'dt_binding_check' - Fix weak references to avoid GOT entries in position-independent code generation - Convert the last use of 'optional' property in arch/sh/Kconfig - Remove support for the 'optional' property in Kconfig - Remove support for Clang's ThinLTO caching, which does not work with the .incbin directive - Change the semantics of $(src) so it always points to the source directory, which fixes Makefile inconsistencies between upstream and downstream - Fix 'make tar-pkg' for RISC-V to produce a consistent package - Provide reasonable default coverage for objtool, sanitizers, and profilers - Remove redundant OBJECT_FILES_NON_STANDARD, KASAN_SANITIZE, etc. - Remove the last use of tristate choice in drivers/rapidio/Kconfig - Various cleanups and fixes in Kconfig * tag 'kbuild-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (46 commits) kconfig: use sym_get_choice_menu() in sym_check_prop() rapidio: remove choice for enumeration kconfig: lxdialog: remove initialization with A_NORMAL kconfig: m/nconf: merge two item_add_str() calls kconfig: m/nconf: remove dead code to display value of bool choice kconfig: m/nconf: remove dead code to display children of choice members kconfig: gconf: show checkbox for choice correctly kbuild: use GCOV_PROFILE and KCSAN_SANITIZE in scripts/Makefile.modfinal Makefile: remove redundant tool coverage variables kbuild: provide reasonable defaults for tool coverage modules: Drop the .export_symbol section from the final modules kconfig: use menu_list_for_each_sym() in sym_check_choice_deps() kconfig: use sym_get_choice_menu() in conf_write_defconfig() kconfig: add sym_get_choice_menu() helper kconfig: turn defaults and additional prompt for choice members into error kconfig: turn missing prompt for choice members into error kconfig: turn conf_choice() into void function kconfig: use linked list in sym_set_changed() kconfig: gconf: use MENU_CHANGED instead of SYMBOL_CHANGED kconfig: gconf: remove debug code ...
2024-05-10kbuild: use $(src) instead of $(srctree)/$(src) for source directoryGravatar Masahiro Yamada 1-1/+1
Kbuild conventionally uses $(obj)/ for generated files, and $(src)/ for checked-in source files. It is merely a convention without any functional difference. In fact, $(obj) and $(src) are exactly the same, as defined in scripts/Makefile.build: src := $(obj) When the kernel is built in a separate output directory, $(src) does not accurately reflect the source directory location. While Kbuild resolves this discrepancy by specifying VPATH=$(srctree) to search for source files, it does not cover all cases. For example, when adding a header search path for local headers, -I$(srctree)/$(src) is typically passed to the compiler. This introduces inconsistency between upstream and downstream Makefiles because $(src) is used instead of $(srctree)/$(src) for the latter. To address this inconsistency, this commit changes the semantics of $(src) so that it always points to the directory in the source tree. Going forward, the variables used in Makefiles will have the following meanings: $(obj) - directory in the object tree $(src) - directory in the source tree (changed by this commit) $(objtree) - the top of the kernel object tree $(srctree) - the top of the kernel source tree Consequently, $(srctree)/$(src) in upstream Makefiles need to be replaced with $(src). Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2024-05-06Merge wireless into wireless-nextGravatar Johannes Berg 1-7/+7
Given how late we are in the cycle, merge the two fixes from wireless into wireless-next as they don't see that urgent. This way, the wireless tree won't need rebasing later. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-03wifi: cfg80211: handle color change per linkGravatar Aditya Kumar Singh 2-4/+12
Currently, during color change, no link id information is passed down. In order to support color change during Multi Link Operation, it is required to pass link id as well. Additionally, update notification APIs to allow drivers/mac80211 to pass the link ID. Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://msgid.link/20240422053412.2024075-2-quic_adisi@quicinc.com Link: https://msgid.link/20240422053412.2024075-3-quic_adisi@quicinc.com [squash, actually only pass 0 from mac80211] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-03wifi: cfg80211: Clear mlo_links info when STA disconnectsGravatar Xin Deng 1-0/+1
wdev->valid_links is not cleared when upper layer disconnect from a wdev->AP MLD. It has been observed that this would prevent offchannel operations like remain-on-channel which would be needed for user space operations with Public Action frame. Clear the wdev->valid_links when STA disconnects. Signed-off-by: Xin Deng <quic_deng@quicinc.com> Link: https://msgid.link/20240426092501.8592-1-quic_deng@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-03wifi: nl80211: Avoid address calculations via out of bounds array indexingGravatar Kees Cook 1-7/+7
Before request->channels[] can be used, request->n_channels must be set. Additionally, address calculations for memory after the "channels" array need to be calculated from the allocation base ("request") rather than via the first "out of bounds" index of "channels", otherwise run-time bounds checking will throw a warning. Reported-by: Nathan Chancellor <nathan@kernel.org> Fixes: e3eac9f32ec0 ("wifi: cfg80211: Annotate struct cfg80211_scan_request with __counted_by") Signed-off-by: Kees Cook <keescook@chromium.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Link: https://msgid.link/20240424220057.work.819-kees@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netGravatar Jakub Kicinski 2-2/+4
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/ti/icssg/icssg_prueth.c net/mac80211/chan.c 89884459a0b9 ("wifi: mac80211: fix idle calculation with multi-link") 87f5500285fb ("wifi: mac80211: simplify ieee80211_assign_link_chanctx()") https://lore.kernel.org/all/20240422105623.7b1fbda2@canb.auug.org.au/ net/unix/garbage.c 1971d13ffa84 ("af_unix: Suppress false-positive lockdep splat for spin_lock() in __unix_gc().") 4090fa373f0e ("af_unix: Replace garbage collection algorithm.") drivers/net/ethernet/ti/icssg/icssg_prueth.c drivers/net/ethernet/ti/icssg/icssg_common.c 4dcd0e83ea1d ("net: ti: icssg-prueth: Fix signedness bug in prueth_init_rx_chns()") e2dc7bfd677f ("net: ti: icssg-prueth: Move common functions into a separate file") No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-19wifi: cfg80211: add return docs for regulatory functionsGravatar Johannes Berg 1-1/+4
Add return value documentation for regulatory functions that are missing it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: cfg80211: make some regulatory functions voidGravatar Johannes Berg 3-16/+13
The return value of regulatory_hint_indoor() is always 0 for success, and the return value of regulatory_hint_found_beacon() is always ignored. Make them both have void return. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: nl80211: don't free NULL coalescing ruleGravatar Johannes Berg 1-0/+2
If the parsing fails, we can dereference a NULL pointer here. Cc: stable@vger.kernel.org Fixes: be29b99a9b51 ("cfg80211/nl80211: Add packet coalesce support") Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240418105220.b328f80406e7.Id75d961050deb05b3e4e354e024866f350c68103@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-08wifi: cfg80211: fix the order of arguments for trace events of the tx_rx_evt ↵Gravatar Igor Artemiev 1-2/+2
class The declarations of the tx_rx_evt class and the rdev_set_antenna event use the wrong order of arguments in the TP_ARGS macro. Fix the order of arguments in the TP_ARGS macro. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Igor Artemiev <Igor.A.Artemiev@mcst.ru> Link: https://msgid.link/20240405152431.270267-1-Igor.A.Artemiev@mcst.ru Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-03Merge tag 'wireless-next-2024-04-03' of ↵Gravatar Jakub Kicinski 1-10/+44
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.10 The first "new features" pull request for v6.10 with changes both in stack and in drivers. The big thing in this pull request is that wireless subsystem is now almost free of sparse warnings. There's only one warning left in ath11k which was introduced in v6.9-rc1 and will be fixed via the wireless tree. Realtek drivers continue to improve, now we have support for RTL8922AE and RTL8723CS devices. ath11k also has long waited support for P2P. This time we have a small conflict in iwlwifi, Stephen has an example merge resolution which should help with fixing the conflict: https://lore.kernel.org/all/20240326100945.765b8caf@canb.auug.org.au/ Major changes: rtw89 * RTL8922AE Wi-Fi 7 PCI device support rtw88 * RTL8723CS SDIO device support iwlwifi * don't support puncturing in 5 GHz * support monitor mode on passive channels * BZ-W device support * P2P with HE/EHT support ath11k * P2P support for QCA6390, WCN6855 and QCA2066 * tag 'wireless-next-2024-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (122 commits) wifi: mt76: mt7915: workaround dubious x | !y warning wifi: mwl8k: Avoid -Wflex-array-member-not-at-end warnings wifi: ti: Avoid a hundred -Wflex-array-member-not-at-end warnings wifi: iwlwifi: mvm: fix check in iwl_mvm_sta_fw_id_mask net: rfkill: gpio: Convert to platform remove callback returning void wifi: mac80211: use kvcalloc() for codel vars wifi: iwlwifi: reconfigure TLC during HW restart wifi: iwlwifi: mvm: don't change BA sessions during restart wifi: iwlwifi: mvm: select STA mask only for active links wifi: iwlwifi: mvm: set wider BW OFDMA ignore correctly wifi: iwlwifi: Add support for LARI_CONFIG_CHANGE_CMD cmd v9 wifi: iwlwifi: mvm: Declare HE/EHT capabilities support for P2P interfaces wifi: iwlwifi: mvm: Remove outdated comment wifi: iwlwifi: add support for BZ_W wifi: iwlwifi: Print a specific device name. wifi: iwlwifi: remove wrong CRF_IDs wifi: iwlwifi: remove devices that never came out wifi: iwlwifi: mvm: mark EMLSR disabled in cleanup iterator wifi: iwlwifi: mvm: fix active link counting during recovery wifi: iwlwifi: mvm: assign link STA ID lookups during restart ... ==================== Link: https://lore.kernel.org/r/20240403093625.CF515C433C7@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-25wifi: cfg80211: ignore non-TX BSSs in per-STA profileGravatar Benjamin Berg 1-9/+38
If a non-TX BSS is included in a per-STA profile, then we cannot set transmitted_bss for it. Even worse, if we do things properly we should be configuring both bssid_index and max_bssid_indicator correctly. We do not actually have both pieces of information (and, some APs currently do not include either). So, ignore any per-STA profile where the RNR says that the BSS is not transmitted. Also fix transmitted_bss to never be set for per-STA profiles. This fixes issues where mac80211 was setting the reference BSSID to an incorrect value. Fixes: 2481b5da9c6b ("wifi: cfg80211: handle BSS data contained in ML probe responses") Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240318184907.6a0babed655a.Iad447fea417c63f683da793556b97c31d07a4aab@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-25wifi: cfg80211: check BSSID Index against MaxBSSIDGravatar Benjamin Berg 1-1/+2
Add a verification that the BSSID Index does not exceed the maximum number of BSSIDs in the Multiple-BSSID set. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240318184907.a7574d415adc.I02f40c2920a9f602898190679cc27d0c8ee2c67d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-25wifi: cfg80211: handle indoor AFC/LPI AP in probe response and beaconGravatar Anjaneyulu 1-0/+4
Mark Indoor LPI and Indoor AFC power types as valid based on channel flags. While on it, added default case. Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240318184907.091cfaaa5f45.I23cfa1104a16fd4eb9751b3d0d7b158db4ff3ecd@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-25wifi: cfg80211: fix rdev_dump_mpp() arguments orderGravatar Igor Artemiev 1-1/+1
Fix the order of arguments in the TP_ARGS macro for the rdev_dump_mpp tracepoint event. Found by Linux Verification Center (linuxtesting.org). Signed-off-by: Igor Artemiev <Igor.A.Artemiev@mcst.ru> Link: https://msgid.link/20240311164519.118398-1-Igor.A.Artemiev@mcst.ru Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-25wifi: cfg80211: add a flag to disable wireless extensionsGravatar Johannes Berg 1-2/+5
Wireless extensions are already disabled if MLO is enabled, given that we cannot support MLO there with all the hard- coded assumptions about BSSID etc. However, the WiFi7 ecosystem is still stabilizing, and some devices may need MLO disabled while that happens. In that case, we might end up with a device that supports wext (but not MLO) in one kernel, and then breaks wext in the future (by enabling MLO), which is not desirable. Add a flag to let such drivers/devices disable wext even if MLO isn't yet enabled. Cc: stable@vger.kernel.org Link: https://msgid.link/20240314110951.b50f1dc4ec21.I656ddd8178eedb49dc5c6c0e70f8ce5807afb54f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-08Merge tag 'wireless-next-2024-03-08' of ↵Gravatar Jakub Kicinski 4-36/+65
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.9 The fourth "new features" pull request for v6.9 with changes both in stack and in drivers. The theme in this pull request is to fix sparse warnings but we still have some left in wireless subsystem. Otherwise quite normal. Major changes: rtw89 * NL80211_EXT_FEATURE_SCAN_RANDOM_SN support * NL80211_EXT_FEATURE_SET_SCAN_DWELL support rtw88 * support for more rtw8811cu and rtw8821cu devices mt76 * mt76x2u: add Netgear WNDA3100v3 USB * mt7915: newer ADIE version support * mt7925: radio temperature sensor support * mt7996: remove GCMP IGTK offload * tag 'wireless-next-2024-03-08' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (125 commits) wifi: rtw89: wow: move release offload packet earlier for WoWLAN mode wifi: rtw89: wow: set security engine options for 802.11ax chips only wifi: rtw89: update suspend/resume for different generation wifi: rtw89: wow: update config mac function with different generation wifi: rtw89: update DMA function with different generation wifi: rtw89: wow: update WoWLAN status register for different generation wifi: rtw89: wow: update WoWLAN reason register for different chips wifi: brcm80211: handle pmk_op allocation failure wifi: rtw89: coex: Add coexistence policy to decrease WiFi packet CRC-ERR wifi: rtw89: coex: When Bluetooth not available don't set power/gain wifi: rtw89: coex: add return value to ensure H2C command is success or not wifi: rtw89: coex: Reorder H2C command index to align with firmware wifi: rtw89: coex: add BTC ctrl_info version 7 and related logic wifi: rtw89: coex: add init_info H2C command format version 7 wifi: rtw89: 8922a: add coexistence helpers of SW grant wifi: rtw89: mac: add coexistence helpers {cfg/get}_plt wifi: cw1200: restore endian swapping wifi: wlcore: sdio: Rate limit wl12xx_sdio_raw_{read,write}() failures warns wifi: rtlwifi: Remove rtl_intf_ops.read_efuse_byte wifi: rtw88: 8821c: Fix false alarm count ... ==================== Link: https://lore.kernel.org/r/20240308100429.B8EA2C433F1@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-04wifi: cfg80211: allow cfg80211_defragment_element() without outputGravatar Johannes Berg 2-14/+43
If we just want to determine the length of the fragmented data, we basically need the same logic, and really we want it to be _literally_ the same logic, so it cannot be out of sync in any way. Allow calling cfg80211_defragment_element() without an output buffer, where it then just returns the required output size. Also add this to the tests, just to exercise it, using the pre-calculated length to really do the defragmentation, which checks that this is sufficient. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Benjamin Berg <benjamin.berg@intel.com> Link: https://msgid.link/20240228095718.6d6565b9e3f2.Ib441903f4b8644ba04b1c766f90580ee6f54fc66@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-04wifi: cfg80211: expose cfg80211_iter_rnr() to driversGravatar Johannes Berg 1-13/+7
In mac80211 we'll need to look at reduced neighbor report entries for channel switch purposes, so export the iteration function to make that simpler. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240228095718.0954809964ef.I53e95c017aa71f14e8d1057afbbc75982ddb43df@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-04wifi: cfg80211: print flags in tracing in hexGravatar Johannes Berg 1-5/+5
It's confusing to see decimal, e.g. 20, here. Printing the flags in hex (0x14 == 20) is much clearer. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240228094254.5f7f4ab2e137.Id5e665104bbc51377b4591289e32f8c1d4711dce@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-04wifi: cfg80211: check A-MSDU format more carefullyGravatar Johannes Berg 1-4/+10
If it looks like there's another subframe in the A-MSDU but the header isn't fully there, we can end up reading data out of bounds, only to discard later. Make this a bit more careful and check if the subframe header can even be present. Reported-by: syzbot+d050d437fe47d479d210@syzkaller.appspotmail.com Link: https://msgid.link/20240226203405.a731e2c95e38.I82ce7d8c0cc8970ce29d0a39fdc07f1ffc425be4@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netGravatar Jakub Kicinski 1-0/+2
Cross-merge networking fixes after downstream PR. Conflicts: net/mptcp/protocol.c adf1bb78dab5 ("mptcp: fix snd_wnd initialization for passive socket") 9426ce476a70 ("mptcp: annotate lockless access for RX path fields") https://lore.kernel.org/all/20240228103048.19255709@canb.auug.org.au/ Adjacent changes: drivers/dpll/dpll_core.c 0d60d8df6f49 ("dpll: rely on rcu for netdev_dpll_pin()") e7f8df0e81bf ("dpll: move xa_erase() call in to match dpll_pin_alloc() error path order") drivers/net/veth.c 1ce7d306ea63 ("veth: try harder when allocating queue memory") 0bef512012b1 ("net: add netdev_lockdep_set_classes() to virtual drivers") drivers/net/wireless/intel/iwlwifi/mvm/d3.c 8c9bef26e98b ("wifi: iwlwifi: mvm: d3: implement suspend with MLO") 78f65fbf421a ("wifi: iwlwifi: mvm: ensure offloading TID queue exists") net/wireless/nl80211.c f78c1375339a ("wifi: nl80211: reject iftype change with mesh ID change") 414532d8aa89 ("wifi: cfg80211: use IEEE80211_MAX_MESH_ID_LEN appropriately") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-21wifi: nl80211: refactor parsing CSA offsetsGravatar Johannes Berg 1-81/+56
The CSA offset parsing happens the same way for all of beacon template offsets, probe response template offsets and TX offsets (for using during probe response TX from userspace directly). Refactor the parsing here. There's an additional check this introduces, which is that the number of counters in TX offsets doesn't exceed the driver capability, but as only two counters are used at most for anything, this is hopefully OK. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-21wifi: nl80211: force WLAN_AKM_SUITE_SAE in big endian in ↵Gravatar Alexis Lothoré 1-1/+18
NL80211_CMD_EXTERNAL_AUTH User-space supplicant (observed at least on wpa_supplicant) historically parses the NL80211_ATTR_AKM_SUITES from the NL80211_CMD_EXTERNAL_AUTH message as big endian _only_ when its value is WLAN_AKM_SUITE_SAE, while processing anything else in host endian. This behavior makes any driver relying on SAE external auth to switch AKM suite to big endian if it is WLAN_AKM_SUITE_SAE. A fix bringing compatibility with both endianness has been brought into wpa_supplicant, however we must keep compatibility with older versions, while trying to reduce the occurences of this manual conversion in wireless drivers. Add the be32 conversion specifically on WLAN_AKM_SUITE_SAE in nl80211 layer to keep compatibility with older wpa_supplicant versions. Suggested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Link: https://msgid.link/20240215-nl80211_fix_akm_suites_endianness-v1-1-57e902632f9d@bootlin.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-21wifi: cfg80211: use ML element parsing helpersGravatar Johannes Berg 1-33/+8
Use the existing ML element parsing helpers and add a new one for this (ieee80211_mle_get_mld_id). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240216135047.4da47b1f035b.I437a5570ac456449facb0b147851ef24a1e473c2@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-21wifi: cfg80211: refactor RNR parsingGravatar Johannes Berg 1-137/+169
We'll need more parsing of the reduced neighbor report element, and we already have two places doing pretty much the same. Combine by refactoring the parsing into a separate function with a callback for each item found. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240216135047.cfff14b692fc.Ibe25be88a769eab29ebb17b9d19af666df6a2227@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-21wifi: cfg80211: clean up cfg80211_inform_bss_frame_data()Gravatar Johannes Berg 1-39/+32
Make cfg80211_inform_bss_frame_data() call the existing cfg80211_inform_bss_data() after parsing the frame in the appropriate way, so we have less code duplication. This required introducing a new CFG80211_BSS_FTYPE_S1G_BEACON, but that can be used by other drivers as well. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240216135047.874aed1eff5f.Ib7d88d126eec50c64763251a78cb432bb5df14df@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-21wifi: cfg80211: remove cfg80211_inform_single_bss_frame_data()Gravatar Johannes Berg 1-165/+80
This function pretty much does what cfg80211_inform_single_bss_data() already does, except on a frame data. But we can call the other one, after populating the inform_data more completely, so we don't need to do everything twice. This also uncovered a few bugs: * the 6 GHz power type checks were only done in this function, move (and rename from 'uhb') those; * the chains/chain_signal information wasn't used in the latter, add that Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240216135047.f3f864f94c78.I2192adb32ab10713e71f395a9d203386264f6ed5@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-21wifi: cfg80211: set correct param change count in ML elementGravatar Benjamin Berg 1-10/+16
The ML element generation code to create a BSS entry from a per-STA profile was not overwriting the BSS parameter change count. This meant that the incorrect parameter change count would be reported within the multi-link element. Fix this by returning the BSS parameter change count from the function and placing it into the ML element. The returned tbtt info was never used, so just drop that to simplify the code. Fixes: 5f478adf1f99 ("wifi: cfg80211: generate an ML element for per-STA profiles") Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240216135047.f2a507634692.I06b122c7a319a38b4e970f5e0bd3d3ef9cac4cbe@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-21wifi: cfg80211: Add KHZ_PER_GHZ to units.h and reuseGravatar Andy Shevchenko 1-4/+3
The KHZ_PER_GHZ might be used by others (with the name aligned with similar constants). Define it in units.h and convert wireless to use it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://msgid.link/20240215154136.630029-1-andriy.shevchenko@linux.intel.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-15wifi: nl80211: reject iftype change with mesh ID changeGravatar Johannes Berg 1-0/+2
It's currently possible to change the mesh ID when the interface isn't yet in mesh mode, at the same time as changing it into mesh mode. This leads to an overwrite of data in the wdev->u union for the interface type it currently has, causing cfg80211_change_iface() to do wrong things when switching. We could probably allow setting an interface to mesh while setting the mesh ID at the same time by doing a different order of operations here, but realistically there's no userspace that's going to do this, so just disallow changes in iftype when setting mesh ID. Cc: stable@vger.kernel.org Fixes: 29cbe68c516a ("cfg80211/mac80211: add mesh join/leave commands") Reported-by: syzbot+dd4779978217b1973180@syzkaller.appspotmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-15wifi: cfg80211: use IEEE80211_MAX_MESH_ID_LEN appropriatelyGravatar Johannes Berg 1-4/+0
Even if that's the same as IEEE80211_MAX_SSID_LEN, we really should just use IEEE80211_MAX_MESH_ID_LEN for mesh, rather than having the BUILD_BUG_ON()s. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-12wifi: cfg80211: report unprotected deauth/disassoc in wowlanGravatar Shaul Triebitz 1-0/+5
Add to cfg80211_wowlan_wakeup another wakeup reason - unprot_deauth_disassoc. To be set to true if the woke up was due to an unprotected deauth or disassoc frame in MFP. In that case report WOWLAN_TRIG_UNPROTECTED_DEAUTH_DISASSOC. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240206164849.a3d739850d03.I8f52a21c4f36d1af1f8068bed79e2f9cbf8289ef@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-12wifi: cfg80211: optionally support monitor on disabled channelsGravatar Johannes Berg 3-17/+41
If the hardware supports a disabled channel, it may in some cases be possible to use monitor mode (without any transmit) on it when it's otherwise disabled. Add a new channel flag IEEE80211_CHAN_CAN_MONITOR that makes it possible for a driver to indicate such a thing. Make it per channel so drivers could have a choice with it, perhaps it's only possible on some channels, perhaps some channels are not supported at all, but still there and marked disabled. In _nl80211_parse_chandef() simplify the code and check only for an unknown channel, _cfg80211_chandef_usable() will later check for IEEE80211_CHAN_DISABLED anyway. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240206164849.87fad3a21a09.I9116b2fdc2e2c9fd59a9273a64db7fcb41fc0328@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-12wifi: cfg80211: rename UHB to 6 GHzGravatar Johannes Berg 3-13/+13
UHB stands for "Ultra High Band", but this term doesn't really exist in the spec. Rename all occurrences to "6 GHz", but keep a few defines for userspace API compatibility. Link: https://msgid.link/20240206164849.c9cfb9400839.I153db3b951934a1d84409c17fbe1f1d1782543fa@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-12wifi: cfg80211: add support for link id attribute in NL80211_CMD_DEL_STATIONGravatar Aditya Kumar Singh 2-3/+23
Currently whenever NL80211_CMD_DEL_STATION command is called without any MAC address, all stations present on that interface are flushed. However with MLO there is a need to flush such stations only which are using at least a particular link from the AP MLD interface. For example - 2 GHz and 5 GHz are part of an AP MLD. To this interface, following stations are connected - 1. One non-EHT STA on 2 GHz link. 2. One non-EHT STA on 5 GHz link. 3. One Multi-Link STA having 2 GHz and 5 GHz as active links. Now if currently, NL80211_CMD_DEL_STATION is issued by the 2 GHz link without any MAC address, it would flush all station entries. However, flushing of station entry #2 at least is not desireable since it is connected to 5 GHz link alone. Hence, add an option to pass link ID as well in the command so that if link ID is passed, stations using that passed link ID alone would be flushed and others will not. So after this, station entries #1 and #3 alone would be flushed and #2 will remain as it is. Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://msgid.link/20240205162952.1697646-2-quic_adisi@quicinc.com [clarify documentation] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-08wifi: cfg80211: send link id in channel_switch opsGravatar Aditya Kumar Singh 2-2/+6
Currently, during channel switch, no link id information is passed down. In order to support channel switch during Multi Link Operation, it is required to pass link id as well. Add changes to pass link id in the channel_switch cfg80211_ops. Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://msgid.link/20240130140918.1172387-2-quic_adisi@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-08wifi: cfg80211: Add utility for converting op_class into chandefGravatar Michael-CY Lee 1-0/+76
This utility is used in STA CSA handling. The op_class in the ECSA Element can be converted into chandef. Co-developed-by: Money Wang <money.wang@mediatek.com> Signed-off-by: Michael-CY Lee <michael-cy.lee@mediatek.com> Link: https://msgid.link/20231222010914.6521-2-michael-cy.lee@mediatek.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-08wifi: cfg80211/mac80211: move puncturing into chandefGravatar Johannes Berg 4-87/+128
Aloka originally suggested that puncturing should be part of the chandef, so that it's treated correctly. At the time, I disagreed and it ended up not part of the chandef, but I've now realized that this was wrong. Even for clients, the RX, and perhaps more importantly, CCA configuration needs to take puncturing into account. Move puncturing into the chandef, and adjust all the code accordingly. Also add a few tests for puncturing in chandef compatibility checking. Link: https://lore.kernel.org/linux-wireless/20220214223051.3610-1-quic_alokad@quicinc.com/ Suggested-by: Aloka Dixit <quic_alokad@quicinc.com> Link: https://msgid.link/20240129194108.307183a5d2e5.I4d7fe2f126b2366c1312010e2900dfb2abffa0f6@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-08wifi: cfg80211: simplify cfg80211_chandef_compatible()Gravatar Johannes Berg 3-81/+273
Simplify cfg80211_chandef_compatible() a bit by switching c1 and c2 around so that c1 is always the narrower one (once they're not identical or narrow/S1G). Then we can just check the various primary channels and exit with the wider one (c2), or NULL. Also refactor the primary 40/80/160 function to not have all the calculations hard-coded, and use a wrapper around it to check primary 40/80/160 compatibility. While at it, add some kunit tests for this functionality. Also expose the new cfg80211_chandef_primary_freq() to drivers, mac80211 will use it. Link: https://msgid.link/20240129194108.be3e6eccaba3.I8399c2ff1435d7378e5837794cb5aa6dd2ee1416@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-08wifi: wireless: declare different S1G chandefs incompatibleGravatar Johannes Berg 1-5/+10
It doesn't look like we can get into this code, but make it more robust and declare two S1G chandefs to be incompatible unless they're identical. Link: https://msgid.link/20240129194108.b28fb0644a8c.I9297ada5cf1baf00dbbdf8fcffd1806883489fc9@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-08wifi: cfg80211: move puncturing validation codeGravatar Johannes Berg 1-69/+69
Upcoming patches will move the puncturing bitmap into the chandef, so chandef validation will need to check for correct puncturing. Purely move the code first so later changes are easier to review. Link: https://msgid.link/20240129194108.1ca184427c76.I077deb8d52c4648eac145b63f88b6c5a3b920ddc@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-08Merge wireless into wireless-nextGravatar Johannes Berg 2-2/+60
There are some changes coming to wireless-next that will otherwise cause conflicts, pull wireless in first to be able to resolve that when applying the individual changes rather than having to do merge resolution later. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Copyright © 1990 – 2022 jet tsang zeon-git.
All Rights Reverse Engineered.