diff options
Diffstat (limited to 'arch/arm/boot/dts/meson8b-odroidc1.dts')
-rw-r--r-- | arch/arm/boot/dts/meson8b-odroidc1.dts | 24 |
1 files changed, 11 insertions, 13 deletions
diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts index 73cdfe855689..941682844faf 100644 --- a/arch/arm/boot/dts/meson8b-odroidc1.dts +++ b/arch/arm/boot/dts/meson8b-odroidc1.dts @@ -281,19 +281,6 @@ "J7 Header Pin 6", "J7 Header Pin 5", "J7 Header Pin 7", "HDMI_CEC", "SYS_LED", "", ""; - - /* - * WARNING: The USB Hub on the Odroid-C1/C1+ needs a reset signal - * to be turned high in order to be detected by the USB Controller. - * This signal should be handled by a USB specific power sequence - * in order to reset the Hub when USB bus is powered down. - */ - usb-hub { - gpio-hog; - gpios = <GPIOAO_4 GPIO_ACTIVE_HIGH>; - output-high; - line-name = "usb-hub-reset"; - }; }; &ir_receiver { @@ -381,5 +368,16 @@ }; &usb1 { + dr_mode = "host"; + #address-cells = <1>; + #size-cells = <0>; status = "okay"; + + hub@1 { + /* Genesys Logic GL852G usb hub */ + compatible = "usb5e3,610"; + reg = <1>; + vdd-supply = <&p5v0>; + reset-gpio = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>; + }; }; |