| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Skip E820 checks for MCFG ECAM regions for new (2016+) machines,
since there's no requirement to describe them in E820 and some
platforms require ECAM to work (Bjorn Helgaas)
- Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more specific (Damien
Le Moal)
- Remove last user and pci_enable_device_io() (Heiner Kallweit)
- Wait for Link Training==0 to avoid possible race (Ilpo Järvinen)
- Skip waiting for devices that have been disconnected while
suspended (Ilpo Järvinen)
- Clear Secondary Status errors after enumeration since Master Aborts
and Unsupported Request errors are an expected part of enumeration
(Vidya Sagar)
MSI:
- Remove unused IMS (Interrupt Message Store) support (Bjorn Helgaas)
Error handling:
- Mask Genesys GL975x SD host controller Replay Timer Timeout
correctable errors caused by a hardware defect; the errors cause
interrupts that prevent system suspend (Kai-Heng Feng)
- Fix EDR-related _DSM support, which previously evaluated revision 5
but assumed revision 6 behavior (Kuppuswamy Sathyanarayanan)
ASPM:
- Simplify link state definitions and mask calculation (Ilpo
Järvinen)
Power management:
- Avoid D3cold for HP Pavilion 17 PC/1972 PCIe Ports, where BIOS
apparently doesn't know how to put them back in D0 (Mario
Limonciello)
CXL:
- Support resetting CXL devices; special handling required because
CXL Ports mask Secondary Bus Reset by default (Dave Jiang)
DOE:
- Support DOE Discovery Version 2 (Alexey Kardashevskiy)
Endpoint framework:
- Set endpoint BAR to be 64-bit if the driver says that's all the
device supports, in addition to doing so if the size is >2GB
(Niklas Cassel)
- Simplify endpoint BAR allocation and setting interfaces (Niklas
Cassel)
Cadence PCIe controller driver:
- Drop DT binding redundant msi-parent and pci-bus.yaml (Krzysztof
Kozlowski)
Cadence PCIe endpoint driver:
- Configure endpoint BARs to be 64-bit based on the BAR type, not the
BAR value (Niklas Cassel)
Freescale Layerscape PCIe controller driver:
- Convert DT binding to YAML (Frank Li)
MediaTek MT7621 PCIe controller driver:
- Add DT binding missing 'reg' property for child Root Ports
(Krzysztof Kozlowski)
- Fix theoretical string truncation in PHY name (Sergio Paracuellos)
NVIDIA Tegra194 PCIe controller driver:
- Return success for endpoint probe instead of falling through to the
failure path (Vidya Sagar)
Renesas R-Car PCIe controller driver:
- Add DT binding missing IOMMU properties (Geert Uytterhoeven)
- Add DT binding R-Car V4H compatible for host and endpoint mode
(Yoshihiro Shimoda)
Rockchip PCIe controller driver:
- Configure endpoint BARs to be 64-bit based on the BAR type, not the
BAR value (Niklas Cassel)
- Add DT binding missing maxItems to ep-gpios (Krzysztof Kozlowski)
- Set the Subsystem Vendor ID, which was previously zero because it
was masked incorrectly (Rick Wertenbroek)
Synopsys DesignWare PCIe controller driver:
- Restructure DBI register access to accommodate devices where this
requires Refclk to be active (Manivannan Sadhasivam)
- Remove the deinit() callback, which was only need by the
pcie-rcar-gen4, and do it directly in that driver (Manivannan
Sadhasivam)
- Add dw_pcie_ep_cleanup() so drivers that support PERST# can clean
up things like eDMA (Manivannan Sadhasivam)
- Rename dw_pcie_ep_exit() to dw_pcie_ep_deinit() to make it parallel
to dw_pcie_ep_init() (Manivannan Sadhasivam)
- Rename dw_pcie_ep_init_complete() to dw_pcie_ep_init_registers() to
reflect the actual functionality (Manivannan Sadhasivam)
- Call dw_pcie_ep_init_registers() directly from all the glue
drivers, not just those that require active Refclk from the host
(Manivannan Sadhasivam)
- Remove the "core_init_notifier" flag, which was an obscure way for
glue drivers to indicate that they depend on Refclk from the host
(Manivannan Sadhasivam)
TI J721E PCIe driver:
- Add DT binding J784S4 SoC Device ID (Siddharth Vadapalli)
- Add DT binding J722S SoC support (Siddharth Vadapalli)
TI Keystone PCIe controller driver:
- Add DT binding missing num-viewport, phys and phy-name properties
(Jan Kiszka)
Miscellaneous:
- Constify and annotate with __ro_after_init (Heiner Kallweit)
- Convert DT bindings to YAML (Krzysztof Kozlowski)
- Check for kcalloc() failure in of_pci_prop_intr_map() (Duoming
Zhou)"
* tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits)
PCI: Do not wait for disconnected devices when resuming
x86/pci: Skip early E820 check for ECAM region
PCI: Remove unused pci_enable_device_io()
ata: pata_cs5520: Remove unnecessary call to pci_enable_device_io()
PCI: Update pci_find_capability() stub return types
PCI: Remove PCI_IRQ_LEGACY
scsi: vmw_pvscsi: Do not use PCI_IRQ_LEGACY instead of PCI_IRQ_LEGACY
scsi: pmcraid: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: mpt3sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: megaraid_sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: ipr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: hpsa: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: arcmsr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
wifi: rtw89: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
dt-bindings: PCI: rockchip,rk3399-pcie: Add missing maxItems to ep-gpios
Revert "genirq/msi: Provide constants for PCI/IMS support"
Revert "x86/apic/msi: Enable PCI/IMS"
Revert "iommu/vt-d: Enable PCI/IMS"
Revert "iommu/amd: Enable PCI/IMS"
Revert "PCI/MSI: Provide IMS (Interrupt Message Store) support"
...
|
|
- Constify pcibus_class (Heiner Kallweit)
- Annotate pci_cache_line_size variables as __ro_after_init (Heiner
Kallweit)
- Clean up formatting of PCI accessor macros (Ilpo Järvinen)
- Remove some OLPC dead code (Kunwu Chan)
- Make pcie_bandwidth_capable() static (Ilpo Järvinen)
* pci/misc:
PCI: Make pcie_bandwidth_capable() static
x86/pci: Remove OLPC dead code
PCI: Clean up accessor macro formatting
PCI/ERR: Cleanup misleading indentation inside if conditions
PCI: Annotate pci_cache_line_size variables as __ro_after_init
PCI: Constify pcibus_class
|
|
- Remove unused Interrupt Message Store (IMS) support (Bjorn Helgaas)
* pci/ims-removal:
Revert "genirq/msi: Provide constants for PCI/IMS support"
Revert "x86/apic/msi: Enable PCI/IMS"
Revert "iommu/vt-d: Enable PCI/IMS"
Revert "iommu/amd: Enable PCI/IMS"
Revert "PCI/MSI: Provide IMS (Interrupt Message Store) support"
Revert "PCI/MSI: Provide pci_ims_alloc/free_irq()"
Revert "PCI/MSI: Provide stubs for IMS functions"
|
|
- Simplify pci_epf_test_alloc_space() by using pci_epc_get_next_free_bar()
as other similar iterators do (Niklas Cassel)
- Configure endpoint BARs as 64-bit if that's all the hardware supports, in
addition to doing it if the BAR size is larger than 2GB (Niklas Cassel)
- Remove superfluous pci_epf_configure_bar(), since pci_epf_alloc_space()
now contains that functionality (Niklas Cassel)
- Simplify pci_epf_test_set_bar() (Niklas Cassel)
- Clean up pci_epf_test_unbind() to reduce indentation level (Niklas
Cassel)
* pci/endpoint:
PCI: endpoint: pci-epf-test: Clean up pci_epf_test_unbind()
PCI: endpoint: pci-epf-test: Simplify pci_epf_test_set_bar() loop
PCI: endpoint: pci-epf-test: Remove superfluous code
PCI: endpoint: Allocate a 64-bit BAR if that is the only option
PCI: endpoint: pci-epf-test: Simplify pci_epf_test_alloc_space() loop
|
|
- Return success from endpoint probe before incorrectly dropping the
reference to the BPMP (Vidya Sagar)
* pci/controller/tegra194:
PCI: tegra194: Fix probe path for Endpoint mode
|
|
- Configure endpoint BAR to be 64-bit if the PCI_BASE_ADDRESS_MEM_TYPE_64
flag is set instead of depending on the new BAR value itself (Niklas
Cassel)
- Set Subsystem Vendor ID correctly (Rick Wertenbroek)
* pci/controller/rockchip:
PCI: rockchip-ep: Remove wrong mask on subsys_vendor_id
PCI: rockchip-ep: Set a 64-bit BAR if requested
|
|
- Enlarge PHY name buffer to avoid snprintf() overflow (Sergio Paracuellos)
* pci/controller/mt7621:
PCI: mt7621: Fix string truncation in mt7621_pcie_parse_port()
|
|
- Move DBI accesses from dw_pcie_ep_init() to dw_pcie_ep_init_complete() so
drivers for endpoints that require Refclk for DBI access, e.g., qcom and
tegra194, can control when this happens (Manivannan Sadhasivam)
- Add endpoint API kernel-doc (Manivannan Sadhasivam)
- Remove .deinit() callback and instead call rcar_gen4_pcie_ep_deinit()
explicitly from rcar-gen4, which was the only user (Manivannan
Sadhasivam)
- Rename dw_pcie_ep_exit() to dw_pcie_ep_deinit() to correspond with
dw_pcie_ep_init() (Manivannan Sadhasivam)
- Add dw_pcie_ep_cleanup() for drivers that need to clean up eDMA resources
when PERST# is asserted, e.g., qcom, tegra194 (Manivannan Sadhasivam)
- Rename dw_pcie_ep_init_complete() to dw_pcie_ep_init_registers() to
better reflect the functionality (Manivannan Sadhasivam)
- Call dw_pcie_ep_init_registers() directly from drivers instead of from
dw_pcie_ep_init() so drivers, e.g., qcom and tegra194, can do it when
Refclk is available (Manivannan Sadhasivam)
- Remove the "core_init_notifier" flag, which previously identified drivers
that required Refclk before DBI access, because it's now unnecessary
(Manivannan Sadhasivam)
* pci/controller/dwc:
PCI: endpoint: Remove "core_init_notifier" flag
PCI: dwc: ep: Call dw_pcie_ep_init_registers() API directly from all glue drivers
PCI: dwc: ep: Rename dw_pcie_ep_init_complete() to dw_pcie_ep_init_registers()
PCI: dwc: ep: Introduce dw_pcie_ep_cleanup() API for drivers supporting PERST#
PCI: dwc: ep: Rename dw_pcie_ep_exit() to dw_pcie_ep_deinit()
PCI: dwc: ep: Remove deinit() callback from struct dw_pcie_ep_ops
PCI: dwc: ep: Add Kernel-doc comments for APIs
PCI: dwc: ep: Fix DBI access failure for drivers requiring refclk from host
|
|
- Configure endpoint BAR to be 64-bit if the PCI_BASE_ADDRESS_MEM_TYPE_64
flag is set instead of depending on the new BAR value itself (Niklas
Cassel)
* pci/controller/cadence:
PCI: cadence: Set a 64-bit BAR if requested
|
|
- Avoid D3cold for HP Pavilion 17 PC/1972 PCIe Ports because we can't get
them back out of D3cold (Mario Limonciello)
* pci/pm:
PCI/PM: Avoid D3cold for HP Pavilion 17 PC/1972 PCIe Ports
|
|
- Check for kcalloc() failure and handle it gracefully (Duoming Zhou)
* pci/of:
PCI: of_property: Return error for int_map allocation failure
|
|
- Update coding style to "mainline is normal path, errors are the
exceptions" (Andy Shevchenko)
* pci/msi:
PCI/MSI: Make error path handling follow the standard pattern
|
|
- Update hotplug TODO notes (Nam Cao)
* pci/hotplug:
PCI: hotplug: Remove obsolete sgi_hotplug TODO notes
PCI: hotplug: Document unchecked return value of pci_hp_add_bridge()
|
|
- Clear bridge Secondary Status errors after enumeration since enumeration
causes many errors (Vidya Sagar)
- Wait for Link Training==0 before starting Link retrain to avoid a race;
this was done previously but broken by a faulty merge (Ilpo Järvinen)
- Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more specific about what
"LEGACY" means (Damien Le Moal)
- Update return types of pci_find_capability() stubs to match the extern
declarations for the actual implementations (Bjorn Helgaas)
- Drop unnecessary pci_enable_device_io() from pata_cs5520 (Heiner
Kallweit)
- Drop unused pci_enable_device_io() (Heiner Kallweit)
- On 2016 and newer BIOSes, skip early E820 check for ECAM regions
described in ACPI MCFG; there's no spec requirement for E820
reservations, and some machines don't provide them (Bjorn Helgaas)
- If devices were disconnected while suspended, don't wait for them when
resuming (Ilpo Järvinen)
* pci/enumeration:
PCI: Do not wait for disconnected devices when resuming
x86/pci: Skip early E820 check for ECAM region
PCI: Remove unused pci_enable_device_io()
ata: pata_cs5520: Remove unnecessary call to pci_enable_device_io()
PCI: Update pci_find_capability() stub return types
PCI: Remove PCI_IRQ_LEGACY
scsi: vmw_pvscsi: Do not use PCI_IRQ_LEGACY instead of PCI_IRQ_LEGACY
scsi: pmcraid: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: mpt3sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: megaraid_sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: ipr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: hpsa: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: arcmsr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
wifi: rtw89: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
wifi: rtw88: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
wifi: ath10k: Refer to INTX instead of LEGACY
net: wangxun: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
r8169: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
net: alx: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
net: atlantic: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
net: amd-xgbe: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
VMCI: Use PCI_IRQ_ALL_TYPES to remove PCI_IRQ_LEGACY use
RDMA/vmw_pvrdma: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
IB/qib: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
drm/amdgpu: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
mfd: intel-lpss: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
ntb: idt: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
platform/x86: intel_ips: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
tty: 8250_pci: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
usb: hcd-pci: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
ASoC: Intel: avs: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
Documentation: PCI: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
PCI/portdrv: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
PCI/MSI: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
PCI: Clarify intent of LT wait
PCI: Wait for Link Training==0 before starting Link retrain
PCI: Clear Secondary Status errors after enumeration
|
|
- Specify Revision 6 of the "Enable DPC" _DSM function to match the
implementation (Kuppuswamy Sathyanarayanan)
- Check for failure of the "Locate Port" _DSM function (Kuppuswamy
Sathyanarayanan)
* pci/edr:
PCI/EDR: Align EDR_PORT_LOCATE_DSM with PCI Firmware r3.3
PCI/EDR: Align EDR_PORT_DPC_ENABLE_DSM with PCI Firmware r3.3
|
|
- Add support for DOE Discovery version 2 (Alexey Kardashevskiy)
* pci/doe:
PCI/DOE: Support discovery version 2
|
|
- Lock the upstream bridge while using it to perform a Secondary Bus Reset
(Dave Jiang)
- Return failure when attempting Secondary Bus Reset below a CXL Port that
has SBR masked (Dave Jiang)
- Add a "cxl_bus" reset method that temporarily unmasks SBR (Dave Jiang)
- Add a warning if we reset a CXL type 3 memory device that was in use
while being reset (Dave Jiang)
* pci/cxl:
cxl: Add post-reset warning if reset results in loss of previously committed HDM decoders
PCI/CXL: Add 'cxl_bus' reset method for devices below CXL Ports
PCI/CXL: Fail bus reset if upstream CXL Port has SBR masked
PCI: Lock upstream bridge for pci_reset_function()
PCI/CXL: Move CXL Vendor ID to pci_ids.h
|
|
- Consolidate #defines for link states (L0s, L1, L1.1, etc) to simplify
ASPM implementation (Ilpo Järvinen)
- Simplify ASPM disable/enable mask calculation (Ilpo Järvinen)
* pci/aspm:
PCI/ASPM: Clean up ASPM disable/enable mask calculation
PCI/ASPM: Consolidate link state defines
|
|
On runtime resume, pci_dev_wait() is called:
pci_pm_runtime_resume()
pci_pm_bridge_power_up_actions()
pci_bridge_wait_for_secondary_bus()
pci_dev_wait()
While a device is runtime suspended along with its PCI hierarchy, the
device could get disconnected. In such case, the link will not come up no
matter how long pci_dev_wait() waits for it.
Besides the above mentioned case, there could be other ways to get the
device disconnected while pci_dev_wait() is waiting for the link to come
up.
Make pci_dev_wait() exit if the device is already disconnected to avoid
unnecessary delay.
The use cases of pci_dev_wait() boil down to two:
1. Waiting for the device after reset
2. pci_bridge_wait_for_secondary_bus()
The callers in both cases seem to benefit from propagating the
disconnection as error even if device disconnection would be more
analoguous to the case where there is no device in the first place which
return 0 from pci_dev_wait(). In the case 2, it results in unnecessary
marking of the devices disconnected again but that is just harmless extra
work.
Also make sure compiler does not become too clever with dev->error_state
and use READ_ONCE() to force a fetch for the up-to-date value.
Link: https://lore.kernel.org/r/20240208132322.4811-1-ilpo.jarvinen@linux.intel.com
Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
After the last user was removed, remove this PCI core function. It's very
unlikely that we'll see a new device requiring io space access, even though
memory space access is supported.
Link: https://lore.kernel.org/r/213ebf62-53a3-42b7-8518-ecd5cd6d6b08@gmail.com
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
|
|
This reverts commit 0194425af0c87acaad457989a2c6d90dba58e776.
IMS (Interrupt Message Store) support appeared in v6.2, but there are no
users yet.
Remove it for now. We can add it back when a user comes along. If this is
re-added later, the relevant part of 41efa431244f ("PCI/MSI: Provide stubs
for IMS functions") should be squashed into it.
Link: https://lore.kernel.org/r/20240410221307.2162676-4-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
|
|
This reverts commit c9e5bea273834a63b5e9ba90ad94b305ba50704e.
IMS (Interrupt Message Store) support appeared in v6.2, but there are no
users yet.
Remove it for now. We can add it back when a user comes along. If this is
re-added later, the relevant part of 41efa431244f ("PCI/MSI: Provide stubs
for IMS functions") should be squashed into it.
Link: https://lore.kernel.org/r/20240410221307.2162676-3-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Remove wrong mask on subsys_vendor_id. Both the Vendor ID and Subsystem
Vendor ID are u16 variables and are written to a u32 register of the
controller. The Subsystem Vendor ID was always 0 because the u16 value
was masked incorrectly with GENMASK(31,16) resulting in all lower 16
bits being set to 0 prior to the shift.
Remove both masks as they are unnecessary and set the register correctly
i.e., the lower 16-bits are the Vendor ID and the upper 16-bits are the
Subsystem Vendor ID.
This is documented in the RK3399 TRM section 17.6.7.1.17
[kwilczynski: removed unnecesary newline]
Fixes: cf590b078391 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller")
Link: https://lore.kernel.org/linux-pci/20240403144508.489835-1-rick.wertenbroek@gmail.com
Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Cc: stable@vger.kernel.org
|
|
pcie_bandwidth_capable() is only used within pci.c, make it static.
Link: https://lore.kernel.org/r/20240507121758.13849-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
The "Downstream Port Containment related Enhancements" ECN of Jan 28, 2019
(document 12888 below), defined the EDR_PORT_LOCATE_DSM function with
Revision ID 5 with a return value encoding (Bits 2:0 = Function, Bits 7:3 =
Device, Bits 15:8 = Bus). When the ECN was integrated into PCI Firmware
r3.3, sec 4.6.13, Bit 31 was added to indicate success or failure.
Check Bit 31 for failure in acpi_dpc_port_get().
Link: https://lore.kernel.org/r/20240501022543.1626025-1-sathyanarayanan.kuppuswamy@linux.intel.com
Link: https://members.pcisig.com/wg/PCI-SIG/document/12888
Fixes: ac1c8e35a326 ("PCI/DPC: Add Error Disconnect Recover (EDR) support")
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
[bhelgaas: split into two patches, update commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Satish Thatchanamurthy <Satish.Thatchanamurt@Dell.com> # one platform
|
|
The "Downstream Port Containment related Enhancements" ECN of Jan 28, 2019
(document 12888 below), defined the EDR_PORT_DPC_ENABLE_DSM function with
Revision ID 5 with Arg3 being an integer. But when the ECN was integrated
into PCI Firmware r3.3, sec 4.6.12, it was defined as Revision ID 6 with
Arg3 being a package containing an integer.
The implementation in acpi_enable_dpc() supplies a package as Arg3 (arg4 in
the code), but it previously specified Revision ID 5. Align this with PCI
Firmware r3.3 by using Revision ID 6.
If firmware implemented per the ECN, its Revision 5 function would receive
a package as Arg3 when it expects an integer, so acpi_enable_dpc() would
likely fail. If such firmware exists and lacks a Revision 6 function that
expects a package, we may have to add support for Revision 5.
Link: https://lore.kernel.org/r/20240501022543.1626025-1-sathyanarayanan.kuppuswamy@linux.intel.com
Link: https://members.pcisig.com/wg/PCI-SIG/document/12888
Fixes: ac1c8e35a326 ("PCI/DPC: Add Error Disconnect Recover (EDR) support")
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
[bhelgaas: split into two patches, update commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Satish Thatchanamurthy <Satish.Thatchanamurt@Dell.com> # one platform
|
|
By default Secondary Bus Reset (SBR) is masked for CXL Ports (see CXL r3.1,
sec 8.1.5.2).
Add cxl_reset_bus_function() (method "cxl_bus") to set the "Unmask SBR" bit
in the upstream CXL Port before performing the bus reset and restore the
original value afterwards.
This method allows the user to perform a bus reset on a CXL device without
needing to set the "Unmask SBR" bit via a user tool.
Link: https://lore.kernel.org/r/20240502165851.1948523-5-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
[bhelgaas: simplify commit log, invert condition to avoid negation]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
|
|
Per CXL spec r3.1, sec 8.1.5.2, the Secondary Bus Reset (SBR) bit in the
Bridge Control register of a CXL port has no effect unless the "Unmask SBR"
bit is set.
Return -ENOTTY if we attempt a bus reset on a device below a CXL Port where
"Unmask SBR" is 0. Otherwise, the bus reset would appear to have succeeded
even though setting the bridge SBR bit had no effect.
Link: https://lore.kernel.org/linux-cxl/20240220203956.GA1502351@bhelgaas/
Link: https://lore.kernel.org/r/20240502165851.1948523-4-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
[bhelgaas: simplify commit log and comments]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
|
|
Fix a long-standing locking gap for missing pci_cfg_access_lock() while
manipulating bridge reset registers and configuration during
pci_reset_bus_function().
If there is an upstream bridge, lock it before locking the device itself.
pci_dev_lock() calls pci_cfg_access_lock(), which blocks the writing of PCI
config space by user space.
Add lockdep assertion via pci_dev->cfg_access_lock to verify
pci_dev->block_cfg_access is set.
Co-developed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20240502165851.1948523-3-dave.jiang@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Update kernel-parameters doc to describe "pcie_aspm=off" more
accurately (Bjorn Helgaas)
- Restore the parent's (not the child's) ASPM state to the parent
during resume, which fixes a reboot during resume (Kai-Heng Feng)
* tag 'pci-v6.9-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/ASPM: Restore parent state to parent, child state to child
PCI/ASPM: Clarify that pcie_aspm=off means leave ASPM untouched
|
|
There's a typo that makes parent device uses child LNKCTL value and vice
versa. This causes Micron NVMe to trigger a reboot upon system resume.
Correct the typo to fix the issue.
Fixes: 64dbb2d70744 ("PCI/ASPM: Disable L1 before configuring L1 Substates")
Link: https://lore.kernel.org/r/20240506051602.1990743-1-kai.heng.feng@canonical.com
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
[bhelgaas: update subject]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Commit c7532b601e77 ("PCI/hotplug: remove the sgi_hotplug driver") deleted
the driver.
Remove the remaining TODO notes as well.
Link: https://lore.kernel.org/r/26784ee39fbb3fbd0fe96508158d74419018e6ad.1714762038.git.namcao@linutronix.de
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Some hotplug drivers do not check the return value of pci_hp_add_bridge().
This may be problematic if the driver proceeds after pci_hp_add_bridge()
fails.
Link: https://lore.kernel.org/r/16a2442ea6ee896987a44df3ed509e4cfde44475.1714762038.git.namcao@linutronix.de
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Return -ENOMEM from of_pci_prop_intr_map() if kcalloc() fails to prevent a
NULL pointer dereference in this case.
Fixes: 407d1a51921e ("PCI: Create device tree node for bridge")
Link: https://lore.kernel.org/r/20240303105729.78624-1-duoming@zju.edu.cn
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
With only one set of defines remaining, state can be almost used as-is to
set ->aspm_disable/default. Only CLKPM and L1 PM substates need special
handling.
Remove unnecessary if conditions that can use the state variable bits
directly. Move ASPM mask calculation into pci_calc_aspm_enable_mask() and
pci_calc_aspm_disable_mask() helpers which makes it easier to alter state
variable directly.
Link: https://lore.kernel.org/r/20240322123952.6384-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
The linux/pci.h and aspm.c files define their own sets of link state
related defines which are almost the same.
Consolidate the use of defines into those defined by linux/pci.h and expand
PCIE_LINK_STATE_L0S to match earlier ASPM_STATE_L0S that includes both
upstream and downstream bits. Rename also the defines that are internal to
aspm.c to start with PCIE_LINK_STATE for consistency.
While the PCIE_LINK_STATE_L0S BIT(0) -> (BIT(0) | BIT(1)) transformation is
not 1:1, in practice aspm.c already used ASPM_STATE_L0S that has both bits
enabled except during mapping.
While at it, place the PCIE_LINK_STATE_CLKPM define last to have more
logical grouping.
Use static_assert() to ensure PCIE_LINK_STATE_L0S is strictly equal to the
combination of PCIE_LINK_STATE_L0S_UP/DW.
Link: https://lore.kernel.org/r/20240322123952.6384-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Clean up formatting of PCI accessor macros:
- Put return statements on own line
- Add a few empty lines for better readability
- Align macro continuation backslashes
- Correct function call argument indentation level
- Reorder variable declarations to order of use
- Drop unnecessary variable initialization
Link: https://lore.kernel.org/r/20240429094707.2529-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[bhelgaas: drop initialization, tweak variables to order of use]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
A few if conditions align misleadingly with the following code block. The
checks are really cascading NULL checks that fit into 80 chars so remove
newlines in between and realign to the if condition indent.
Link: https://lore.kernel.org/r/20240429094707.2529-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Make error path handling follow the standard pattern, i.e. checking for
errors first. This makes code much easier to read and understand despite
being a bit longer.
Link: https://lore.kernel.org/r/20240426144039.557907-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
In the PCI Express Port Bus Driver, use the macro PCI_IRQ_INTX instead of
the now deprecated PCI_IRQ_LEGACY macro.
Link: https://lore.kernel.org/r/20240325070944.3600338-3-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
In pci_alloc_irq_vectors_affinity(), use the macro PCI_IRQ_INTX instead of
the now deprecated PCI_IRQ_LEGACY macro.
Link: https://lore.kernel.org/r/20240325070944.3600338-2-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Clarify the comment relating to the LT wait and the purpose of the check
that implements the implementation note in PCIe r6.1 sec 7.5.3.7.
Suggested-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://lore.kernel.org/r/20240423130820.43824-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Two changes were made in link retraining logic independent of each other.
The commit e7e39756363a ("PCI/ASPM: Avoid link retraining race") added a
check to pcie_retrain_link() to ensure no Link Training is currently active
to address the Implementation Note in PCIe r6.1 sec 7.5.3.7. At that time
pcie_wait_for_retrain() only checked for the Link Training (LT) bit being
cleared.
The commit 680e9c47a229 ("PCI: Add support for polling DLLLA to
pcie_retrain_link()") generalized pcie_wait_for_retrain() into
pcie_wait_for_link_status() which can wait either for LT or the Data Link
Layer Link Active (DLLLA) bit with 'use_lt' argument and supporting waiting
for either cleared or set using 'active' argument.
In the merge commit 1abb47390350 ("Merge branch 'pci/enumeration'"), those
two divergent branches converged. The merge changed LT bit checking added
in the commit e7e39756363a ("PCI/ASPM: Avoid link retraining race") to now
wait for completion of any ongoing Link Training using DLLLA bit being set
if 'use_lt' is false.
When 'use_lt' is false, the pseudo-code steps of what occurs in
pcie_retrain_link():
1. Wait for DLLLA==1
2. Trigger link to retrain
3. Wait for DLLLA==1
Step 3 waits for the link to come up from the retraining triggered by Step
2. As Step 1 is supposed to wait for any ongoing retraining to end, using
DLLLA also for it does not make sense because link training being active is
still indicated using LT bit, not with DLLLA.
Correct the pcie_wait_for_link_status() parameters in Step 1 to only wait
for LT==0 to ensure there is no ongoing Link Training.
This only impacts the Target Speed quirk, which is the only case where
waiting for DLLLA bit is used. It currently works in the problematic case
by means of link training getting initiated by hardware repeatedly and
respecting the new link parameters set by the caller, which then make
training succeed and bring the link up, setting DLLLA and causing
pcie_wait_for_link_status() to return success. We are not supposed to rely
on luck and need to make sure that LT transitioned through the inactive
state though before we initiate link training by hand via RL (Retrain Link)
bit.
Fixes: 1abb47390350 ("Merge branch 'pci/enumeration'")
Link: https://lore.kernel.org/r/20240423130820.43824-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
We enumerate devices by attempting config reads to the Vendor ID of each
possible device. On conventional PCI, if no device responds, the read
terminates with a Master Abort (PCI r3.0, sec 6.1). On PCIe, the config
read is terminated as an Unsupported Request (PCIe r6.0, sec 2.3.2,
7.5.1.3.7). In either case, if the read addressed a device below a bridge,
it is logged by setting "Received Master Abort" in the bridge Secondary
Status register.
Clear any errors logged in the Secondary Status register after enumeration.
Link: https://lore.kernel.org/r/20240116143258.483235-1-vidyas@nvidia.com
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
[bhelgaas: simplify commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Annotate both variables as __ro_after_init, enforcing that they can't be
changed after the init phase.
Link: https://lore.kernel.org/r/52fd058d-6d72-48db-8e61-5fcddcd0aa51@gmail.com
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Constify pcibus_class. All users take a const struct class * argument.
Link: https://lore.kernel.org/r/5e01f46f-266f-4fb3-be8a-8cb9e566cd75@gmail.com
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
The aer-inject tool is no longer maintained in the original repository
and is missing a fix related to the musl library. So, with the author's
(Huang Ying) consent, it has been moved to a new repository [1].
Update all references to the repository link.
Link: https://github.com/intel/aer-inject.git [1]
Link: https://lore.kernel.org/r/20240416055035.200085-1-sathyanarayanan.kuppuswamy@linux.intel.com
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Huang Ying <ying.huang@intel.com>
|
|
The following warning appears when driver is compiled with W=1.
CC drivers/pci/controller/pcie-mt7621.o
drivers/pci/controller/pcie-mt7621.c: In function ‘mt7621_pcie_probe’:
drivers/pci/controller/pcie-mt7621.c:228:49: error: ‘snprintf’ output may
be truncated before the last format character [-Werror=format-truncation=]
228 | snprintf(name, sizeof(name), "pcie-phy%d", slot);
| ^
drivers/pci/controller/pcie-mt7621.c:228:9: note: ‘snprintf’ output between
10 and 11 bytes into a destination of size 10
228 | snprintf(name, sizeof(name), "pcie-phy%d", slot);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Clean this up increasing destination buffer one byte.
[kwilczynski: commit log]
Closes: https://lore.kernel.org/linux-pci/20240110212302.GA2123146@bhelgaas/T/#t
Link: https://lore.kernel.org/linux-pci/20240111082704.2259450-1-sergio.paracuellos@gmail.com
Reported-by: Bjorn Helgaas <helgaas@kernel.org>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
Tegra194 PCIe probe path is taking failure path in success case for
Endpoint mode. Return success from the switch case instead of going
into the failure path.
Fixes: c57247f940e8 ("PCI: tegra: Add support for PCIe endpoint mode in Tegra194")
Link: https://lore.kernel.org/linux-pci/20240408093053.3948634-1-vidyas@nvidia.com
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
|
|
Clean up pci_epf_test_unbind() by using a continue if we did not allocate
memory for the BAR index. This reduces the indentation level by one.
This makes pci_epf_test_unbind() more similar to pci_epf_test_set_bar().
Link: https://lore.kernel.org/linux-pci/20240320113157.322695-6-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
Linus Torvalds
Bjorn Helgaas
Ilpo Järvinen
Heiner Kallweit
Rick Wertenbroek
Kuppuswamy Sathyanarayanan
Dave Jiang
Kai-Heng Feng
Nam Cao
Duoming Zhou
Andy Shevchenko
Damien Le Moal
Vidya Sagar
Sergio Paracuellos
Niklas Cassel
