Merge tag 'usb-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB / Thunderbolt driver updates from Greg KH:
 "Here is the big set of USB and Thunderbolt driver changes for 6.3-rc1.

  Nothing major in here, just lots of good development, including:

   - Thunderbolt additions for new device support and features

   - xhci driver updates and cleanups

   - USB gadget media driver updates (includes media core changes that
     were acked by the v4l2 maintainers)

   - lots of other USB gadget driver updates for new features

   - dwc3 driver updates and fixes

   - minor debugfs leak fixes

   - typec driver updates and additions

   - dt-bindings conversions to yaml

   - other small bugfixes and driver updates

  All have been in linux-next for a while with no reported issues"

* tag 'usb-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (237 commits)
  usb: dwc3: xilinx: Remove unused of_gpio,h
  usb: typec: pd: Add higher capability sysfs for sink PDO
  usb: typec: pd: Remove usb_suspend_supported sysfs from sink PDO
  usb: dwc3: pci: add support for the Intel Meteor Lake-M
  usb: gadget: u_ether: Don't warn in gether_setup_name_default()
  usb: gadget: u_ether: Convert prints to device prints
  usb: gadget: u_serial: Add null pointer check in gserial_resume
  usb: gadget: uvc: fix missing mutex_unlock() if kstrtou8() fails
  xhci: host: potential NULL dereference in xhci_generic_plat_probe()
  dt-bindings: usb: amlogic,meson-g12a-usb-ctrl: make G12A usb3-phy0 optional
  usb: host: fsl-mph-dr-of: reuse device_set_of_node_from_dev
  of: device: Do not ignore error code in of_device_uevent_modalias
  of: device: Ignore modalias of reused nodes
  usb: gadget: configfs: Fix set but not used variable warning
  usb: gadget: uvc: Use custom strings if available
  usb: gadget: uvc: Allow linking function to string descs
  usb: gadget: uvc: Pick up custom string descriptor IDs
  usb: gadget: uvc: Allow linking XUs to string descriptors
  usb: gadget: configfs: Attach arbitrary strings to cdev
  usb: gadget: configfs: Support arbitrary string descriptors
  ...

4 files changed, 48 insertions, 41 deletions

diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts
index 73cdfe855689..941682844faf 100644
--- a/arch/arm/boot/dts/meson8b-odroidc1.dts
+++ b/arch/arm/boot/dts/meson8b-odroidc1.dts
@@ -281,19 +281,6 @@
 			  "J7 Header Pin 6", "J7 Header Pin 5",
 			  "J7 Header Pin 7", "HDMI_CEC",
 			  "SYS_LED", "", "";
-
-	/*
-	 * WARNING: The USB Hub on the Odroid-C1/C1+ needs a reset signal
-	 * to be turned high in order to be detected by the USB Controller.
-	 * This signal should be handled by a USB specific power sequence
-	 * in order to reset the Hub when USB bus is powered down.
-	 */
-	usb-hub {
-		gpio-hog;
-		gpios = <GPIOAO_4 GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "usb-hub-reset";
-	};
 };
 
 &ir_receiver {
@@ -381,5 +368,16 @@
 };
 
 &usb1 {
+	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
+
+	hub@1 {
+		/* Genesys Logic GL852G usb hub */
+		compatible = "usb5e3,610";
+		reg = <1>;
+		vdd-supply = <&p5v0>;
+		reset-gpio = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>;
+	};
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index 201596247fd9..01356437a077 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -250,21 +250,6 @@
 	};
 };
 
-&gpio_ao {
-	/*
-	 * WARNING: The USB Hub on the Odroid-C2 needs a reset signal
-	 * to be turned high in order to be detected by the USB Controller
-	 * This signal should be handled by a USB specific power sequence
-	 * in order to reset the Hub when USB bus is powered down.
-	 */
-	hog-0 {
-		gpio-hog;
-		gpios = <GPIOAO_4 GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "usb-hub-reset";
-	};
-};
-
 &hdmi_tx {
 	status = "okay";
 	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
@@ -414,5 +399,16 @@
 };
 
 &usb1 {
+	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
+
+	hub@1 {
+		/* Genesys Logic GL852G USB 2.0 hub */
+		compatible = "usb5e3,610";
+		reg = <1>;
+		vdd-supply = <&p5v0>;
+		reset-gpio = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>;
+	};
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
index 8c30ce63686e..d04768a66bfe 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
@@ -26,20 +26,30 @@
 	sound {
 		model = "ODROID-C4";
 	};
-};
 
-&gpio {
-	/*
-	 * WARNING: The USB Hub on the Odroid-C4 needs a reset signal
-	 * to be turned high in order to be detected by the USB Controller
-	 * This signal should be handled by a USB specific power sequence
-	 * in order to reset the Hub when USB bus is powered down.
-	 */
-	hog-0 {
-		gpio-hog;
-		gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "usb-hub-reset";
+	/* USB hub supports both USB 2.0 and USB 3.0 root hub */
+	usb-hub {
+		dr_mode = "host";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* 2.0 hub on port 1 */
+		hub_2_0: hub@1 {
+			compatible = "usb2109,2817";
+			reg = <1>;
+			peer-hub = <&hub_3_0>;
+			reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
+			vdd-supply = <&vcc_5v>;
+		};
+
+		/* 3.1 hub on port 4 */
+		hub_3_0: hub@2 {
+			compatible = "usb2109,817";
+			reg = <2>;
+			peer-hub = <&hub_2_0>;
+			reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
+			vdd-supply = <&vcc_5v>;
+		};
 	};
 };
 
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 989183c76ae0..7e0487bbdaa0 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -938,6 +938,7 @@ CONFIG_USB_SERIAL_FTDI_SIO=m
 CONFIG_USB_SERIAL_OPTION=m
 CONFIG_USB_QCOM_EUD=m
 CONFIG_USB_HSIC_USB3503=y
+CONFIG_USB_ONBOARD_HUB=m
 CONFIG_NOP_USB_XCEIV=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_RENESAS_USBHS_UDC=m
@@ -960,6 +961,8 @@ CONFIG_TYPEC_TCPCI=m
 CONFIG_TYPEC_FUSB302=m
 CONFIG_TYPEC_TPS6598X=m
 CONFIG_TYPEC_HD3SS3220=m
+CONFIG_TYPEC_UCSI=m
+CONFIG_UCSI_CCG=m
 CONFIG_TYPEC_MUX_GPIO_SBU=m
 CONFIG_MMC=y
 CONFIG_MMC_BLOCK_MINORS=32